1. Коопсуздук маалыматы
Read all instructions carefully before using the XDeer S004 Biometric Pistol Safe. Failure to follow these instructions may result in injury, damage to the safe, or unauthorized access. Keep this manual in a safe place for future reference.
- Always store firearms unloaded in the safe.
- Колдонулбай турган учурда сейфти ар дайым кулпулап коюңуз.
- Шашылыш ачкычтарды сейфтин ичинде сактабаңыз. Аларды коопсуз, өзүнчө жерде сактаңыз.
- Уруксатсыз алып кетүүнү алдын алуу үчүн сейфтин бекем орнотулганын же байланганын текшериңиз.
- Keep children away from the safe and ensure they do not have access to keys or codes.
- This safe is designed to deter theft and unauthorized access but is not fireproof or waterproof.
2. Пакеттин мазмуну
Пакетте бардык буюмдар бар экенин текшериңиз:
- XDeer S004 Biometric Pistol Safe
- Шашылыш ачкычтар (2)
- Коопсуздук кабели
- Кубаттуу адаптер
- Монтаждоочу жабдуулар (буроолор, анкерлер)
- User Manual
Figure 2.1: Included accessories for the XDeer S004 safe.
3. Орнотуу
3.1 Баштапкы кубаттуулук
The safe can be powered by 4 AAA alkaline batteries (not included) or the included power adapter.
- Open the safe using one of the emergency keys. The keyhole is located on the side of the safe.
- Locate the battery compartment inside the safe. Insert 4 AAA alkaline batteries, ensuring correct polarity.
- Alternatively, connect the power adapter to the safe's power input port and plug it into a wall outlet.
Figure 3.1: Powering the safe using the adapter.
Figure 3.2: Internal components including battery compartment and adapter port.
3.2 Сейфти орнотуу
The safe can be secured using the included security cable or mounting hardware.
- Using the Security Cable: Loop the security cable around a stationary object (e.g., bed frame, car seat anchor) and secure it to the safe's cable port.
- Using Mounting Hardware: Use the provided screws and anchors to secure the safe to a flat surface, such as a wall or floor.
Figure 3.3: Securing the safe with the steel cable.
4. Иштөө нускамалары
4.1 Programming a New PIN Code
- With the safe open, locate the "PROGRAM" button inside the safe.
- Press and hold the "PROGRAM" button until the backlit keypad flashes blue light once and you hear one beep. Release the button.
- Input a new 3-8 digit code using the keypad buttons (1-4).
- Press the "PROGRAM" button again (just a single press).
- If successful, the backlit keypad will flash blue light twice and you will hear two beeps.
Video 4.1: Instructions on how to set up a PIN code and fingerprint for the XDeer S004 safe.
4.2 Programming a New Fingerprint
- With the safe open, locate the "PROGRAM" button inside the safe.
- Press and hold the "PROGRAM" button until the backlit keypad flashes blue light once and you hear one beep. Release the button.
- Swipe your finger across the fingerprint scanner four times. Ensure consistent placement for each swipe.
- If successful, the backlit keypad will flash blue light twice and you will hear two beeps.
- It is recommended to program the same finger multiple times for improved recognition.
Figure 4.2: Advanced Biometric Technology for quick access.
4.3 Сейфти ачуу
- Манжа изин колдонуу: Place a programmed finger on the fingerprint scanner. The safe will open within 0.5 seconds if recognized.
- ПИН-кодду колдонуу: Enter your programmed 3-8 digit PIN code on the backlit keypad.
- Шашылыш ачкычты колдонуу: Insert and turn one of the emergency keys in the keyhole on the side of the safe.
Video 4.3: Demonstration of the XDeer S004 safe opening with quick access methods.
4.4 Silent Mode and LED Light
- The safe features a silent mode to operate without disturbing others. Refer to the full manual for activation/deactivation instructions.
- An internal LED light illuminates the safe's interior when opened, providing clear visibility.
5. Техникалык тейлөө
- Батареяны алмаштыруу: Replace batteries when the low battery indicator appears or if the safe does not respond promptly. Use 4 new AAA alkaline batteries.
- Тазалоо: Сейфтин сыртын жумшак, d менен сүртүңүзamp cloth. Do not use abrasive cleaners or solvents. Keep the fingerprint scanner clean and dry.
- Баскычтопко кам көрүү: Avoid pressing the keypad buttons with excessive force.
6. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Сейф манжа изи менен ачылбайт. | Finger not properly scanned or not programmed. | Ensure finger is clean and dry. Rescan finger slowly and completely. Re-program fingerprint, ensuring multiple scans of the same finger. |
| Сейф PIN код менен ачылбайт. | Туура эмес код киргизилди же код программаланган эмес. | Verify the correct PIN code. Re-program the PIN code if necessary. |
| Safe does not power on. | Түгөнүп калган батареялар же кубат адаптериндеги көйгөй. | Replace batteries. Check power adapter connection and ensure outlet is functional. |
| Коопсуз сигналдар тынымсыз берилип турат. | Батареянын аздыгы жөнүндө эскертүү. | Бардык 4 AAA щелочтуу батареяларын дароо алмаштырыңыз. |
7. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модел | S004 (gs-FU) |
| Сырткы өлчөмдөрү (L x W x Y) | 11.22" x 8.56" x 2.45" |
| Ички өлчөмдөрү (L x W x Y) | 11.02" x 6.51" x 1.29" |
| Кулпу түрү | Biometric Fingerprint, Keypad, Key |
| Материал | Эритме болот, көмүртек болот |
| Power Source | 4 AAA Alkaline Batteries (not included) or Power Adapter (included) |
| Access Speed (Fingerprint) | 0.5 секунданын ичинде |
| Keypad Code Length | 3-8 сан |
Figure 7.1: Exterior dimensions of the XDeer S004 safe.
8. Кепилдик жана колдоо
XDeer provides a 1-year warranty for all gun safe series. If you have any questions or concerns regarding your XDeer S004 Biometric Pistol Safe, please contact XDeer customer support for assistance.
For customer support, please visit the official XDeer webсайтка же продуктунун таңгагында көрсөтүлгөн байланыш маалыматына кайрылыңыз.
