aigo AT240 240mm White CPU Liquid Cooler Instruction Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your aigo AT240 240mm White CPU Liquid Cooler. Please read this manual thoroughly before installation to ensure proper setup and optimal performance.

The aigo AT240 is an All-in-One (AIO) RGB water cooling system designed for efficient heat dissipation in desktop computers. It features an independent pump design, micro water channel radiator, FDB bearing PWM fans, and SYNC Addressable RGB lighting.

Негизги өзгөчөлүктөрү

• Independent Pump Design: Pump separated from the pump head for improved heat dissipation efficiency. Pump RPM: 5500RPM±10%.
• Micro Water Channel Design: Enhances effective heat dissipation area and provides ampаба айлануу үчүн мейкиндик.
• FDB Bearing Fans: Silent ARGB fans with airflow of 56.5CFM and wind pressure of 2.28MMH2O. Expected running time: 40,000 hours.
• SYNC Addressable RGB Light Effect: Lighting can synchronize with GIGABYTE, MSI, ASUS motherboards (3pin-5v) and controlled via motherboard Addressable RGB software.
• Кеңири шайкештик: Compatible with Intel LGA 115X/1200/20XX and AMD TR4/AM4/AM3+/AM3 sockets.

Пакеттин мазмуну

Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз.

Image: The aigo AT240 liquid cooler, its retail box, and all included accessories including mounting hardware, fans, and thermal paste.

Сүрөт: деталдуу view of the mounting hardware for Intel LGA 115X/1200/20XX and AMD AM4/AM3+/AM3 sockets, along with thermal paste and cables.

Пакет, адатта, төмөнкүлөрдү камтыйт:

• AT240 Radiator with Integrated Pump and Tubing
• 2 x 120 мм PWM ARGB желдеткичтери
• Mounting Brackets for Intel and AMD Sockets
• Various Screws and Standoffs
• Термикалык паста
• ARGB контроллери (эгер энелик синхрондоштурууну колдонбосоңуз)
• Колдонуучунун Колдонмосу (бул документ)

Орнотуу жана орнотуу

Орнотуудан мурун, системаңыздын өчүрүлгөнүн жана розеткадан суурулганын текшериңиз. Колдонуучунун белгилүү бир жерлери үчүн энелик платанын колдонмосун караңыз.

1. CPU розеткасын даярдаңыз

Identify the correct mounting bracket for your CPU socket (Intel LGA 115X/1200/20XX or AMD TR4/AM4/AM3+/AM3). Install the appropriate backplate (if required) and standoffs onto your motherboard.

2. Термикалык пастаны сүйкөңүз

Clean the CPU surface thoroughly. Apply a small amount of thermal paste (included) to the center of the CPU's Integrated Heat Spreader (IHS). A pea-sized dot is usually sufficient.

3. Насосту/Муздак плитаны орнотуңуз

Carefully align the pump/cold plate with the CPU and the installed standoffs. Secure it using the provided thumb screws or mounting hardware. Tighten screws in a diagonal pattern until snug, but do not overtighten.

Сүрөт: жарылды view showing the independent pump design and the internal micro water channels for efficient heat transfer.

4. Радиаторду жана желдеткичтерди орнотуңуз

Attach the 120mm PWM ARGB fans to the radiator using the long screws provided. Ensure the fans are oriented to push or pull air in the desired direction (typically pushing air through the radiator and out of the case). Mount the radiator assembly to an available fan mount location in your PC case (e.g., top, front, or rear).

Image: Close-up of the radiator fins, highlighting the 27mm thickness and 99.7% copper content for enhanced water flow and heat exchange.

Image: Illustration of the two 120mm PWM fans, indicating their adjustable speed range of 800-2000 RPM based on temperature.

5. Кабелдерди туташтырыңыз

Connect the pump's 3-pin power cable to a dedicated AIO_PUMP or CPU_OPT header on your motherboard. If neither is available, use a SYS_FAN header. Connect the fan PWM cables to CPU_FAN or SYS_FAN headers. For ARGB lighting, connect the 3-pin 5V ARGB cables from the pump and fans to your motherboard's Addressable RGB header or to the included ARGB controller.

Image: A comprehensive wiring diagram illustrating how to connect the AT240 splitter cable, fans, pump, and ARGB lighting to the motherboard and power supply.

Тутумуңузду күйгүзүүдөн мурун бардык туташуулар коопсуз экенин текшериңиз.

Иштөө нускамалары

RGB жарык көзөмөлдөө

The aigo AT240 features Addressable RGB (ARGB) lighting on both the fans and the pump head. This lighting can be controlled in two primary ways:

1. Энелик платаны синхрондоштуруу: If your motherboard has a 3-pin 5V ARGB header, connect the cooler's ARGB cables to it. You can then control the lighting effects and colors using your motherboard's dedicated RGB software (e.g., GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASUS Aura Sync). This allows for synchronized lighting across compatible components.
2. ARGB контроллери: If your motherboard does not support ARGB sync, or if you prefer standalone control, use the included ARGB controller. Connect the cooler's ARGB cables to this controller. The controller typically has buttons to cycle through various lighting modes, colors, and effects. Refer to the controller's specific instructions for detailed operation.

Желдетүүчү ылдамдыкты көзөмөлдөө

The PWM fans automatically adjust their speed based on CPU temperature, providing optimal cooling performance while minimizing noise. You can monitor and, in some cases, manually adjust fan curves through your motherboard's BIOS/UEFI settings or dedicated software.

Техникалык тейлөө

Үзгүлтүксүз техникалык тейлөө сиздин aigo AT240 суюк муздаткычыңыздын узак мөөнөттүү иштешин жана оптималдуу иштешин камсыз кылууга жардам берет.

• Чаңды тазалоо: Periodically clean the radiator fins and fan blades to prevent dust buildup, which can impede airflow and reduce cooling efficiency. Use compressed air or a soft brush. Ensure fans are not spinning during cleaning.
• Байланыштарды текшерүү: Occasionally inspect all cable connections (power, PWM, ARGB) to ensure they are secure and free from damage.
• Температураны көзөмөлдөө: Use monitoring software to keep an eye on your CPU temperatures. Significant increases in idle or load temperatures may indicate an issue with the cooler or thermal paste.
• Термикалык паста: While not frequently required, re-applying thermal paste every few years can help maintain optimal thermal transfer, especially if you notice a degradation in cooling performance.

Проблемаларды чечүү

Техникалык шарттар

Кепилдик жана колдоо

For warranty information and technical support, please refer to the official aigo webсайтына кириңиз же алардын кардарларды тейлөө кызматына түз кайрылыңыз. Кепилдиктин конкреттүү шарттары аймакка жана сатуучуга жараша өзгөрүшү мүмкүн.

Кошумча жардам алуу үчүн, сиз иш сапары менен болот Amazon'догу aigo дүкөнү.