WORKPRO 12V Cordless Drill Driver and Home Tool Kit

1. Киришүү

The WORKPRO 12V Cordless Drill Driver and Home Tool Kit is a versatile and efficient solution for various DIY projects and home maintenance tasks. This comprehensive kit includes a powerful 12V cordless drill driver along with a selection of essential hand tools, all conveniently stored in a durable 14-inch bag. Designed for ease of use and portability, it is suitable for both beginners and experienced users.

Сүрөт 1.1: Бүттүview of the WORKPRO 12V Cordless Drill Driver and Home Tool Kit, showcasing the drill, battery, charger, and various hand tools neatly arranged with the storage bag.

2. Камтылган компоненттер

Your WORKPRO 12V Cordless Drill Driver and Home Tool Kit includes the following items:

• 1 даана 12V зымсыз бургулоочу драйвер
• 1 даана 1500 мАч литий-иондук батарея
• 1 компьютердик кубаттагыч
• 10 даана HSS4241 бургу учтары
• 32 даана CR-V бурагыч учтары
• 1 даана 60 мм магниттик узартуу тилкеси
• 1 даана пайдалуу бычак
• 10 даана пайдалуу бычак лезвиеси
• 1 даана 6 дюймдук тайгаланма муун кычкачы
• 1 даана 6 дюймдук жөнгө салынуучу ачкыч
• 1 даана 8 унция айнек буласынан жасалган туткасы бар тырмактуу балка
• 1 даана 10 фут (3 м) лента өлчөгүч
• 1 даана торпедо деңгээли
• 1 даана 14 дюймдук сактоочу баштык

Сүрөт 2.1: деталдуу view of the various hand tools provided in the kit, including a hammer, utility knife, pliers, adjustable wrench, tape measure, and level.

3. Орнотуу

3.1 Батареяны заряддоо

Before first use, fully charge the 1500 mAh Lithium-ion battery. Connect the charger to a standard power outlet and then connect it to the battery. The charging indicator lights on the battery or charger will indicate the charging status. A full charge typically takes a few hours. For optimal battery life, recharge the electric drill battery every 3-6 months if it is not used frequently.

3.2 Батареяны орнотуу/чыгаруу

To install the battery, align the battery pack with the base of the drill handle and slide it in until it clicks securely into place. To remove the battery, press the battery pack release button located on the side of the battery and slide the battery out.

3.3 Attaching Drill Bits/Screwdriver Bits

The drill features a 3/8 inch keyless ratcheting chuck. To insert a bit, twist the chuck counter-clockwise until the jaws are open wide enough to accept the bit. Insert the desired HSS4241 drill bit or CR-V screwdriver bit (with the 60mm magnetic extension bar if needed) into the chuck. Twist the chuck clockwise to tighten the jaws firmly around the bit. Ensure the bit is centered and securely held before operation.

Image 3.1: A detailed diagram illustrating the key components of the WORKPRO 12V Cordless Drill Driver, including the 3/8" Keyless Chuck, Torque Adjustment Collar, Two-speed Control, LED Light, Battery Capacity Indicator, Variable Speed Switch, Forward/Reverse Rotation Control, and Battery Pack Release Button.

4. Бургулоочу машинаны иштетүү

4.1 Кубат жана ылдамдыкты башкаруу

The 12V cordless drill delivers 20 N.m max torque and features variable 2-speed settings:

• Төмөнкү ылдамдык (0-400 айн/мин): Ideal for fastening applications and drilling into softer materials where more torque and control are needed.
• Жогорку ылдамдык (0-1500 айн/айн): Suitable for drilling into harder materials and tasks requiring faster rotation.

Adjust the speed using the two-speed control switch located on top of the drill. The variable speed trigger allows for precise control over the drilling or driving speed; press lightly for slower speeds and more firmly for faster speeds.

Image 4.1: Illustration highlighting the 12V high-performance motor of the drill, capable of 1500 max RPM and 20 max N.m torque, with two adjustable speeds to meet various work needs.

4.2 Моментти тууралоо

The drill features an 18+1 torque position clutch, allowing for precise torque adjustment. Rotate the torque adjustment collar to select the desired setting. Lower settings are for driving small screws or working with soft materials to prevent over-tightening or stripping. Higher settings are for driving larger screws or drilling into harder materials. The '+1' setting is for maximum drilling power.

Image 4.2: Visual representation of the 18+1 torque adjustment feature, demonstrating its suitability for drilling into various materials like metal, brick, and wood, as well as for driving screws.

4.3 Алдыга/Артка айлантуу

A forward/reverse rotation control switch is located above the trigger. Push the switch to the left for forward rotation (for drilling and driving screws) and to the right for reverse rotation (for removing screws or backing out bits). Center the switch to lock the trigger and prevent accidental operation.

4.4 LED иш жарык

The integrated LED work light illuminates the work area when the trigger is pressed, improving visibility in dimly lit spaces. The light remains on for approximately ten seconds after the trigger is released.

Image 4.3: The drill's LED light in action, demonstrating its effectiveness in illuminating compact and dark spaces, making it easier to work.

5. Техникалык тейлөө

5.1 Жалпы тазалоо

Regularly clean the drill driver and other tools with a dry cloth to remove dust and debris. Do not use harsh chemicals or abrasive cleaners. Keep ventilation openings clear to prevent overheating.

5.2 Батареяга кам көрүү

Always store the battery in a cool, dry place away from direct sunlight and extreme temperatures. Do not store the battery completely discharged. As mentioned in Setup, recharge the battery every 3-6 months if not in regular use to prolong its lifespan.

5.3 Сактоо

Store the drill driver and all accessories in the provided 14-inch storage bag in a dry, secure location, out of reach of children. Ensure all components are clean and dry before storage.

6. Кыйынчылыктарды

If you encounter issues with your WORKPRO 12V Cordless Drill Driver, refer to the following common troubleshooting steps:

• Бургулоочу иштебей жатат: Ensure the battery is fully charged and properly inserted. Check that the forward/reverse switch is not in the center (locked) position.
• Иш учурунда электр энергиясын жоготуу: Батарея аз болушу мүмкүн. Батареяны кайра заряддаңыз.
• Чактын ичинде бит тайып: Ensure the chuck is tightened securely around the bit. The bit shank might be dirty or damaged.
• Ашыкча ысып кетүү: Allow the tool to cool down. Ensure ventilation slots are not blocked. Avoid continuous heavy-duty use without breaks.

For persistent issues not resolved by these steps, please contact WORKPRO customer support.

7. Техникалык шарттар

8. Кепилдик жана колдоо

For warranty information, product support, or to inquire about replacement parts, please refer to the official WORKPRO webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.

PDF форматындагы расмий Колдонуучу колдонмосун да жүктөп алууга болот: Колдонуучунун колдонмосун жүктөп алуу (PDF)