Ymiko 810 E Bike LED дисплей контроллери колдонуучунун колдонмосу

1. Киришүү

This user manual provides comprehensive instructions for the Ymiko 810 LED Display Controller. Please read this manual carefully before installation and operation to ensure correct usage and optimal performance of your electric bicycle or scooter system. This display unit is designed to provide essential information and control functions for compatible brushless motor speed controllers.

2. Продукт бүтүп калдыview

The Ymiko 810 LED Display Controller is a compact and durable unit designed for electric bicycles and scooters. It features an intuitive interface with LED indicators for battery level, power assist mode, and a 6km/h assist function. The controller connects to your e-bike system via a 5-wire cable, providing essential feedback and control.

Image 2.1: The Ymiko 810 LED Display Controller, showing the main unit and its coiled connection cable.

3. Негизги өзгөчөлүктөрү

• LED дисплей: Clear indication of battery status and power assist levels.
• Туруктуу курулуш: Lightweight, waterproof, and designed for longevity.
• Батарея көрсөткүчү: Visual representation of remaining battery charge.
• Power Assist Control: Allows selection of different power assist gears (Low, Medium, High).
• 6km/h Assist Function: Dedicated button for low-speed assistance.
• Автоматтык уйку: Enters sleep mode after 10 minutes of inactivity to conserve power.
• Мүчүлүштүктүн көрсөткүчү: Provides visual cues for system errors.
• Gear Memory Function: Retains the last selected gear setting even after power failure.
• 5-Wire Digital Communication: Standardized connection for reliable data exchange with compatible controllers.

Сүрөт 3.1: Детальдуу view of the Ymiko 810 display, highlighting the ON/OFF, 6km, and MODE buttons, along with power and assist level indicators.

4. Пакеттин мазмуну

Пакет, адатта, төмөнкүлөрдү камтыйт:

• Ymiko 810 LED Display Controller with integrated 5-wire cable.

Note: Additional components for your e-bike system (e.g., motor, controller, battery) are sold separately.

5. Орнотуу боюнча колдонмо

Before proceeding with installation, ensure your electric bicycle or scooter's power is turned off and the battery is disconnected. Professional installation is recommended if you are unfamiliar with e-bike wiring.

5.1 Дисплейди орнотуу

1. Identify a suitable location on your handlebar for the display unit. Ensure it is easily accessible and does not obstruct other controls.
2. Loosen the screw on the display's mounting bracket.
3. Position the display on the handlebar and tighten the screw securely. Do not overtighten.

5.1-сүрөт: Капталдагы проfile of the Ymiko 810 display, illustrating the integrated handlebar mounting bracket.

5.2 Connecting the 5-Wire Cable

1. Locate the corresponding 5-wire connector on your e-bike's motor controller.
2. Carefully align the pins of the display's 5-wire connector with the controller's connector.
3. Push the connectors firmly together until they click into place, ensuring a secure connection.
4. Route the cable neatly along the frame, securing it with cable ties if necessary, to prevent interference with moving parts.

Сүрөт 5.2: Жакын план view of the 5-wire connector, showing the distinct colored wires for proper connection.

Маанилүү: Ensure the connector type matches your controller. The Ymiko 810 uses a 5-wire connector. Some older systems may use a 4-wire connector, which is not compatible.

Image 5.3: This image illustrates the difference between the 5-wire (New Type) and 4-wire (Old Type) connectors. Verify your controller's connector type before installation.

6. Wiring Diagram (5-Wire Connector)

The 5-wire cable typically follows this color code for connection to a compatible e-bike controller:

• Кызыл зым: Оң күч (+)
• Көк жип: Controller Power Control Line
• Кара зым: Терс кубаттуулук (-)
• Жашыл зым: Data Receiving (RX)
• Сары зым: Data Transmitting (TX)

Always cross-reference with your motor controller's manual for specific wiring instructions. Incorrect wiring can damage the display or controller.

7. Операция

Once installed and connected, the Ymiko 810 LED Display Controller provides intuitive control over your e-bike's basic functions.

7.1 Күйгүзүү/өчүрүү

• басыңыз КҮЙГҮЗҮҮ/ӨЧҮРҮҮ button to power on the display and the e-bike system.
• басып, кармап туруңуз КҮЙГҮЗҮҮ/ӨЧҮРҮҮ button for a few seconds to power off the system.

7.2 Power Assist Mode Selection

• басыңыз РЕЖИМ button to cycle through the power assist levels: Low, Medium, and High.
• The corresponding LED indicator (LOW, MED, HIGH) will illuminate to show the currently selected assist level.

7.3 6km/h Assist Function

• басып, кармап туруңуз 6 км button to activate the 6km/h assist function. This provides a steady low speed for walking alongside the bike or navigating crowded areas.
• Функцияны өчүрүү үчүн баскычты коё бериңиз.

7.4 Батарея деңгээлинин көрсөткүчү

The КҮЧ LED indicators provide an approximate visual representation of the remaining battery charge. The number of illuminated LEDs decreases as the battery drains.

8. Техникалык тейлөө

• Тазалоо: Wipe the display unit with a soft, damp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
• Текшерүү: Periodically check the cable and connector for any signs of wear or damage. Ensure the mounting bracket is secure.
• Суу таасири: While the unit is waterproof, avoid prolonged submersion or high-pressure washing.

9. Кыйынчылыктарды

10. Техникалык шарттар

11. Кепилдик жана колдоо

Кепилдик маалыматы же техникалык колдоо үчүн, сатып алууда берилген документтерди караңыз же сатуучу менен түз байланышыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.