Geevon TX16 Remote Outdoor Sensor Instruction Manual

1. Продукт бүтүп калдыview

The Geevon TX16 Remote Outdoor Sensor is designed to measure outdoor temperature and humidity. It functions as a replacement or supplementary sensor for compatible Geevon wireless weather stations and indoor/outdoor thermometers. This sensor transmits data wirelessly to a main display unit.

Figure 1: Geevon TX16 Remote Outdoor Sensor (Front View)

Негизги өзгөчөлүктөрү:

• Сырттагы температураны жана нымдуулукту өлчөйт.
• Equipped with sensitive vents for accurate readings.
• Wireless transmission range of up to 200 feet (60 meters) using a 433 MHz signal.
• Supports 3 selectable channels for monitoring multiple locations.
• LCD display for direct temperature and humidity readings.
• Battery-powered (requires 2 AAA batteries).

2. Шайкештик

This TX16 Remote Outdoor Sensor is specifically designed for use with the following Geevon Weather Station and Thermometer models:

• Geevon 208270
• Geevon 208667
• Geevon 208664
• Geevon 22146
• Geevon 228646

Маанилүү: Бул сенсор ЖОК compatible with the Geevon 2086122 Weather Station. Please verify your main unit's model number before purchasing or attempting to pair this sensor.

3. Орнотуу жана орнотуу

3.1. Батареяны орнотуу

1. Сенсордун артындагы батарея бөлүкчөсүн табыңыз.
2. Батарея уясынын капкагын ачыңыз.
3. Туура полярдуулукту (+/-) камсыз кылуу менен 2 AAA батарейкасын салыңыз.
4. Батарея уясынын капкагын бекем жабыңыз.

2-сүрөт: Сенсор артка View Батарея бөлүмү менен

3.2. Канал тандоо

The sensor supports three channels (1, 2, or 3). You must select the same channel on both the remote sensor and your main weather station unit for successful communication.

1. After installing batteries, the sensor will automatically begin transmitting.
2. On the sensor, locate the channel selection switch (usually inside the battery compartment or a small button). Select your desired channel (e.g., Channel 1).
3. On your main weather station unit, set it to the corresponding channel to receive data from this sensor. Refer to your main unit's manual for specific instructions on channel selection.

Figure 3: Monitoring Multiple Locations with Multiple Sensors

3.3. Оптималдуу жайгаштыруу

For accurate temperature and humidity readings, consider the following placement guidelines:

• Place the sensor in a well-ventilated area.
• Avoid direct sunlight, as this can lead to artificially high temperature readings.
• Keep the sensor away from heat sources (e.g., exhaust vents, heating units) and moisture sources (e.g., sprinklers, standing water).
• For outdoor use, it is recommended to place the sensor under an eave or other sheltered location to protect it from direct rain and harsh weather, despite its weather-resistant design.
• Ensure the sensor is within the 200-foot (60-meter) transmission range of your main weather station unit. Obstacles like thick walls or metal structures can reduce this range.

Figure 4: Recommended Sensor Placement

4. Иштөө нускамалары

4.1. Маалыматтарды өткөрүү

The sensor transmits temperature and humidity data wirelessly every 30 seconds to the paired main weather station unit. The main unit will then display the readings for the corresponding channel.

4.2. Температура бирдигин тандоо (°C/°F)

Цельсий (°C) жана Фаренгейт (°F) температура бирдиктеринин ортосунда которулуу үчүн:

• Locate the small pinhole switch on the sensor. This is typically found near the LCD display or inside the battery compartment.
• Use a thin object, such as a needle or a paperclip, to gently press into the pinhole switch.
• The temperature unit on the sensor's LCD display will toggle between °C and °F. Your main weather station unit should also update to reflect this change if it is set to receive data from this sensor.

5. Техникалык тейлөө

• Тазалоо: Сенсордун сыртын жумшак, d менен сүртүңүзamp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
• Батареяны алмаштыруу: Replace batteries when the low battery indicator appears on the sensor's LCD or the main unit's display. Always replace both AAA batteries at the same time.
• Курчап турган чөйрөнү коргоо: While the sensor is weather-resistant, prolonged exposure to extreme conditions (e.g., heavy rain, snow, direct intense sunlight) can affect its lifespan and accuracy. Position it in a sheltered location whenever possible.

6. Кыйынчылыктарды

7. Техникалык шарттар

Figure 5: Sensor Dimensions