1. Продукт бүтүп калдыview
The SECRUI Wireless Doorbell system provides a convenient and reliable solution for home and office entry notification. This system includes a plug-in receiver and two waterproof push buttons (transmitters), offering a wide operating range and multiple customization options.
Image 1: SECRUI Wireless Doorbell System Components
Негизги өзгөчөлүктөрү:
- Зымсыз диапазон: Ачык жерлерде 1000 футка (300 метрге) чейин.
- Коңгуроолор: 58 selectable melodies.
- Үн деңгээли: 5 adjustable levels, including mute mode, up to 120dB.
- Аба ырайынын туруктуулугу: IP55 rated push buttons, operational from -4°F to 140°F (-20°C to 60°C).
- Эстутум функциясы: Retains last selected chime and volume settings after power loss.
- LED көрсөткүчү: Visual alert on both receiver and push button.
2. Пакеттин мазмуну
Сиздин пакетте бардык компоненттер бар экенин текшериңиз:
- 1 x Plug-in Receiver
- 2 x Push Button (Transmitter, battery included)
- 2 х жабышчаак скотч
- 4 х бурамалар
- 4 x Анкерлер
- 1 x User Manual
3. Коопсуздук маалыматы
Маанилүү коопсуздук көрсөтмөлөрү:
- Always follow the manufacturer's advice when using power tools and wear suitable protective equipment (e.g., safety goggles) when drilling holes.
- Дубалдарга тешиктерди бургулоодон мурун, катылган электр кабелдерин жана суу түтүктөрүн текшериңиз. Эгерде шектенүү жаралса, кабель/түтүк локаторун колдонуу сунушталат.
- Ensure the receiver is plugged into a 120 Volts AC outlet.
4. Орнотуу жана орнотуу
The SECRUI Wireless Doorbell is designed for easy installation. No complex wiring is required.
4.1 Кабылдагычты орнотуу
- Плагин: Insert the plug-in receiver into a standard 120V AC electrical outlet in your desired location. Ensure the outlet is easily accessible and not obstructed.
- Күйгүзүү: The receiver will power on and emit a default chime.
Image 2: Easy Receiver and Push Button Setup
4.2 Push Button (Transmitter) Installation
The push button can be installed using either adhesive tape or screws.
Image 3: DIY Installation Options (Adhesive and Screw Mounting)
- Жайгашкан жерди тандоо: Select a flat, clean surface near your door. Ensure the location is within the 1000ft wireless range of the receiver.
- Клей монтаждоо:
- Clean the mounting surface thoroughly to remove dust and debris.
- Peel off one side of the double-sided adhesive tape and attach it to the back of the push button.
- Peel off the other side of the tape and firmly press the push button onto the desired surface for at least 30 seconds.
- Бурама орнотуу:
- c баскычын ачыңызasing (refer to the diagram in the manual for specific instructions on opening).
- Mark the positions for the screw holes on the wall.
- Drill pilot holes if necessary and insert the anchors.
- Secure the back plate of the push button to the wall using the provided screws.
- Reattach the front cover of the push button.
The push button is designed to be waterproof (IP55 rated) and can withstand various weather conditions, including rain, snow, and extreme temperatures from -4°F to 140°F.
Image 4: Weather Resistance of the Push Button
5. Иштөө нускамалары
5.1 Changing Chimes
- Cycle Through Chimes: Press the "Chime Selection" button on the receiver to cycle through the 58 available melodies.
- Коңгуроону тандоо: Stop pressing the button when you hear your desired chime.
- Жупташтыруу (зарыл болсо): If the chime does not play when the push button is pressed after selection, you may need to re-pair the push button with the receiver. (See Section 5.4 for pairing instructions).
Image 5: Chime and Volume Controls
5.2 Үндү тууралоо
- Үн баскычы: Press the "Volume" button on the receiver to adjust the sound level. There are 5 levels, ranging from mute (0dB) to maximum (120dB).
- Үнсүз режим: Continue pressing the volume button until the mute icon is displayed or the sound is off. This is useful for situations like a sleeping baby or during classes.
Image 6: Volume and Mute Mode Options
5.3 LED көрсөткүч
Both the receiver and the push button feature an LED indicator. When the push button is pressed, its LED will light up, and the receiver's LED will flash, providing a visual alert in addition to the chime.
5.4 Pairing Additional Push Buttons or Re-pairing
Your doorbell system comes pre-paired. If you need to pair additional push buttons or re-pair existing ones:
- Жупташтыруу режимине кирүү: Press and hold the "Volume" button on the receiver for approximately 5 seconds until the receiver emits a "ding" sound and its LED indicator flashes rapidly. This indicates it's in pairing mode.
- Activate Push Button: Within 10 seconds, press the push button you wish to pair. The receiver will chime to confirm successful pairing.
- Жупташтыруу режиминен чыгуу: The receiver will automatically exit pairing mode after 10 seconds if no button is pressed, or you can press any button on the receiver to exit.
The system supports pairing multiple push buttons to one receiver, and multiple receivers to one push button.
6. Техникалык тейлөө
6.1 Тазалоо
Wipe the doorbell receiver and push buttons with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the surface.
6.2 Battery Replacement (Push Button)
The push button uses a CR2032 lithium battery, which typically lasts for about 3 years. When the push button's LED indicator no longer lights up when pressed, or the range decreases significantly, it's time to replace the battery.
Image 7: 3-Year Battery Life
- Ачык Casing: Carefully open the back cover of the push button using a small screwdriver or coin.
- Эски батареяны алып салуу: Эски CR2032 батареясын алып салыңыз.
- Жаңы батареяны салыңыз: Жаңы CR2032 батареясын оң (+) тарабын өйдө каратып салыңыз.
- Жабуу Casing: Snap the back cover firmly back into place.
Эски батареяларды жергиликтүү эрежелерге ылайык жок кылыңыз.
7. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Doorbell does not chime when button is pressed. |
|
|
| Кыска иштөө диапазону. |
|
|
| Chime volume is too low or too loud. | Үндүн көлөмүн тууралоо керек. | Press the "Volume" button on the receiver to adjust to the desired level (see Section 5.2). |
| Кабыл алгычтын диоду күйөт, бирок үн жок. | Receiver is in mute mode. | Press the "Volume" button on the receiver to increase the volume (see Section 5.2). |
Image 8: Wireless Range Illustration
8. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель номери | AUB0963RQZFN |
| Бренд | SECRUI |
| Кубат булагы (кабыл алуучу) | AC 120 вольт |
| Кубат булагы (баскыч) | 1 x CR2032 Lithium Manganese Dioxide Battery (included) |
| Батареянын орточо иштөө мөөнөтү | 3 жыл |
| Зымсыз диапазон | Ачык абада 300 метрге (1000 фут) чейин |
| Үн деңгээли | 120 дБ чейин |
| Коңгуроолордун саны | 58 |
| Үн деңгээли | 5 (including mute) |
| Weather Resistance (Push Button) | IP55 |
| Иштөө температурасы | -4°F – 140°F (-20°C – 60°C) |
| Материал | ABS |
| Түс | Кара |
| Орнотуу ыкмасы | Self-Adhesive & Screw-In |
| Өзгөчөлүктөр | Adjustable Volume, Optional Ringtone, Memory Function, LED Indicator |
| Элемент Салмагы | 4.6 унция (130 грамм) |
| Пакеттин өлчөмдөрү | 4.25 x 2.87 x 2.44 дюйм (10.8 x 7.3 x 6.2 см) |
9. Кепилдик жана колдоо
For warranty information, please refer to the documentation included with your product or visit the official SECRUI website. If you encounter any issues or have questions regarding your SECRUI Wireless Doorbell, please contact SECRUI customer support for assistance.
SECRUI Official Store: Visit SECRUI Store on Amazon
