1. Киришүү
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Franklin 3/4 HP Deep Well Submersible Pump Motor, Model 2145079004S. Please read these instructions thoroughly before installation or operation to ensure proper function and longevity of the product.
Image 1.1: Franklin 3/4 HP Deep Well Submersible Pump Motor. This image displays the cylindrical motor unit, primarily stainless steel, with electrical connection points and a splined shaft visible at the top.
2. Коопсуздук маалыматы
Өрт, электр тогуна урунуу жана жеке жаракат алуу коркунучун азайтуу үчүн ар дайым негизги коопсуздук чараларын сактаңыз. Бул көрсөтмөлөрдү аткарбоо олуттуу жаракат алууга же өлүмгө алып келиши мүмкүн.
- Электр коопсуздугу: Бардык электр туташуулары квалификациялуу электрик тарабынан жасалганын жана жергиликтүү эрежелерди сактаганын текшериңиз. Тейлөөдөн мурун электр кубатынан ажыратыңыз.
- Негиздөө: The motor must be properly grounded to prevent electric shock.
- Суунун сапаты: Бул насосту тез күйүүчү суюктуктар үчүн же кооптуу жерлерде колдонбоңуз.
- Көтөрүү: Use appropriate lifting equipment when handling the pump motor due to its weight.
- Температура: Do not operate the motor in ambient temperatures exceeding 86°F (30°C).
3. Орнотуу жана орнотуу
Proper installation is crucial for the performance and longevity of your submersible pump motor. Consult a professional for installation if you are unsure about any steps.
- Орнотууга чейинки текшерүү: Мотордун мүнөздөмөлөрүн (том) текшериңизtage, HP, phase) match your power supply and pump requirements. Inspect the motor for any shipping damage.
- Motor-Pump Assembly: Carefully align and attach the motor to the pump end, ensuring the splined shaft engages correctly. Secure all fasteners according to the pump manufacturer's recommendations.
- Электр байланыштары: Connect the motor leads (3 wires) to the control box or power supply. Ensure all connections are watertight and insulated using appropriate splicing kits for submersible applications.
- Негиздөө: Connect the motor's ground wire to a reliable earth ground.
- Lowering into Well: Use a strong, non-corrosive safety rope or cable attached to the pump assembly. Carefully lower the pump and motor into the well, ensuring it hangs freely and does not touch the well casing.
- Түтүк туташуу: Connect the discharge pipe to the pump outlet. Ensure all pipe connections are secure and leak-free.
4. Операция
Once installed, the motor is designed for continuous operation within its specified parameters.
- Алгачкы ишке киргизүү: After installation, prime the pump if necessary (refer to pump manual). Restore power to the system. The motor should start smoothly.
- Мониторинг: Observe the system for unusual noises, vibrations, or leaks during initial operation.
- Суунун деңгээли: Ensure the well water level remains above the pump intake during operation to prevent dry running, which can damage the motor.
- Жылуулук коргоо: The motor features automatic thermal protection. If the motor overheats, it will shut off and restart once it cools down. Investigate the cause of overheating if this occurs frequently.
5. Техникалык тейлөө
The Franklin submersible pump motor is designed for minimal maintenance. However, periodic checks of the overall pumping system are recommended.
- Жылдык системаны текшерүү: Have a qualified technician inspect the entire well system annually, including the pump, motor, control box, and pressure tank.
- Электр байланыштары: Periodically check for loose or corroded electrical connections in the control box.
- Суунун сапаты: Monitor water quality for excessive sediment or abrasive particles, which can reduce pump and motor life.
- Мотор корпусу: The corrosion-resistant stainless steel shell requires no specific maintenance.
6. Кыйынчылыктарды
Refer to the following table for common issues and their potential solutions. Always disconnect power before attempting any troubleshooting or repairs.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Мотор иштебейт | No power; tripped breaker; faulty control box; wiring issue. | Check power supply, reset breaker, inspect control box components, verify wiring connections. |
| Мотор иштейт, бирок суу жок | Low well water level; clogged pump intake; faulty pump end; air lock. | Check well level, inspect pump intake, consult pump manual, bleed air from system. |
| Motor cycles frequently | Pressure tank issue; leaky plumbing; low well yield. | Inspect pressure tank, check for leaks, assess well capacity. |
| Мотор ысып, өчүп калат | Төмөн үнtage; excessive load; insufficient cooling flow; dry running. | Ырды текшерүүtage, reduce load if possible, ensure proper water flow around motor, check well level. |
7. Техникалык шарттар
Detailed specifications for the Franklin 3/4 HP Deep Well Submersible Pump Motor, Model 2145079004S.
| Спецификация | Нарк |
|---|---|
| пункт | Deep Well Submersible Pump Motor |
| Motor Application | Насостор |
| Motor Sub Application | Терең скважинадагы суу астындагы насостор |
| Мотор түрү | Capacitor-Start |
| Корпу | Totally Enclosed Nonventilated |
| Ат күчү (HP) | 3/4 |
| Аталыш тактасынын айлануу/чыгуусу | 3450 |
| Тtage | 230V |
| Фаза | 1 |
| Толук жүк Amps | 6.8 А |
| Max. Service Factor Amps | 8.0 А |
| Жыштык (Гц) | 60 Гц |
| Кызмат фактору | 1.5 |
| Max. Айлана-чөйрөнүн температурасы | 86°F (30°C) |
| Thrust Rating | 300 XNUMX фунт |
| Зымдардын саны | 3 |
| Термикалык коргоо | Авто |
| Айлануу | CCWSE (Counter-Clockwise Shaft End) |
| Диаметри | 4 дюйм |
| Диафрагма түрү | Pressure Equalizing |
| Вал материалы | Splined Stainless Steel |
| Shell Material | Corrosion Resistant Stainless Steel |
| Статор түрү | Герметикалык жабылган |
| Коргошун узундугу | 48 дюйм |
| Бийиктик | 10-5/8 дюйм |
| RPM диапазону | 3001-3600 |
| Бөлүмдүн номери | 2145079004S |
| ASIN | B096BFMDN2 |
| Дата биринчи жеткиликтүү | 1-июнь, 2021-жыл |
8. Кепилдик жана Кардарларды колдоо
For warranty information, please refer to the documentation provided at the time of purchase or contact your authorized Franklin dealer. Keep your purchase receipt as proof of purchase.
For technical assistance or customer support, please contact your product supplier or an authorized service center. When contacting support, please have your model number (2145079004S) and purchase date readily available.
