1. Киришүү жана коопсуздук маалыматы
Thank you for choosing the Kerbl GT806 Aesculap Cordless Shearing Machine. This manual provides essential information for the safe and efficient use of your new device. Please read all instructions carefully before operation and retain this manual for future reference.
1.1 Жалпы коопсуздук эрежелери
- Always wear appropriate personal protective equipment, including safety glasses and gloves, when operating the shearing machine.
- Ensure the machine is switched off and disconnected from the power source (battery removed) before performing any maintenance, cleaning, or blade changes.
- Keep hands, hair, and loose clothing away from moving parts, especially the shearing blades.
- Do not operate the machine in wet conditions or near flammable liquids or gases.
- Store the machine in a dry, secure place, out of reach of children and unauthorized personnel.
- Use only original Kerbl or Aesculap replacement parts and accessories.
2. Пакеттин мазмуну
Бардык буюмдардын бар экенин жана бузулбаганын текшерүү үчүн таңгактан чыгарганда таңгактын ичиндегисин текшериңиз:
- Kerbl GT806 Aesculap Cordless Shearing Machine
- 1x Заряддалуучу Батарейка
- Shearing Blades (GT502/GT501)
- Battery Charger (not explicitly listed in 'whats_in_the_box' but implied for a cordless tool)
- Instruction Manual
Image: The Kerbl GT806 Aesculap Cordless Shearing Machine, showing its blue body and shearing head.
3. Орнотуу
3.1 Батареяны заряддоо
- Before first use, fully charge the battery. Insert the battery into the charger according to the charger's instructions.
- Connect the charger to a suitable power outlet. The charging indicator light will show the charging status.
- Once fully charged, disconnect the charger and remove the battery.
3.2 Attaching the Shearing Blades
- Ensure the machine is switched off and the battery is removed.
- Align the shearing blades (GT502/GT501) with the shearing head mechanism.
- Securely fasten the blades using the provided screws or locking mechanism. Ensure they are tightly secured to prevent movement during operation.
3.3 Баштапкы майлоо
Before first use and regularly thereafter, apply a few drops of specialized shearing machine oil to the blades. This reduces friction, prevents overheating, and prolongs blade life.
Сүрөт: бир тарап view of the Kerbl GT806 shearing machine, highlighting the battery compartment and shearing head.
4. Иштөө нускамалары
4.1 Күйгүзүү/өчүрүү
- Insert the charged battery into the machine's battery compartment until it clicks into place.
- To turn on the machine, press the power switch located on the handle.
- To turn off the machine, press the power switch again.
4.2 Shearing Technique
- Hold the machine firmly with a balanced grip. The ergonomic design with a slim housing and balanced weight distribution ensures comfortable handling.
- Apply consistent, even pressure while guiding the shearing head through the animal's coat.
- Work in systematic strokes to ensure uniform shearing.
- The machine features high shearing speed due to its high stroke rate and powerful motor, allowing for efficient operation.
Image: The Kerbl GT806 shearing machine being used to shear an animal, demonstrating its ergonomic handling.
5. Техникалык тейлөө
Regular maintenance is crucial for the longevity and optimal performance of your shearing machine.
5.1 Бычактарды тазалоо
- After each use, switch off the machine and remove the battery.
- Use a brush to remove hair and debris from the blades and shearing head.
- For thorough cleaning, the blades can be removed and cleaned with a suitable cleaning solution. Ensure they are completely dry before reattaching.
5.2 Майлоо
Apply shearing machine oil to the blades every 5-10 minutes during continuous operation, or before and after each use. This maintains smooth operation and prevents premature wear.
5.3 Фильтрди тейлөө
The machine features a design that allows for filter changes without tools. Regularly check the air filter for blockages and clean or replace it as needed to ensure proper air throughput and prevent overheating.
5.4 Бычакты курчутуу
The shearing blades are made of abrasion-resistant carbon steel and can be resharpened multiple times by a professional. This ensures consistent and long-lasting cutting quality.
6. Кыйынчылыктарды
If you encounter issues with your Kerbl GT806 shearing machine, refer to the table below for common problems and solutions.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Машина иштебейт | Батарея заряддалган эмес же туура эмес салынган | Батарея толук заряддалганын жана туура салынганын текшериңиз. |
| Начар кесүү көрсөткүчү | Blades dull, dirty, or improperly adjusted | Clean and lubricate blades. If dull, have them professionally sharpened. Check blade tension. |
| Машина ысып кетет | Insufficient lubrication, blocked air filter, or continuous heavy use | Apply more oil to blades. Clean or replace air filter. Allow machine to cool down during extended use. |
| Ашыкча титирөө же ызы-чуу | Loose blades or internal component issue | Check if blades are securely fastened. If problem persists, contact customer support. |
7. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель номери | GT806 |
| Бренд | Kerbl |
| Shearing Head System | Aesculap SnapOn and Compatible |
| Мотор түрү | EC Motor Drive |
| Инсульттун ылдамдыгы | 2,750 сокку/мүнөт |
| Gear түрү | Spur Gear |
| Үн басымынын деңгээли | 70 дБ |
| Элемент Салмагы | 1 килограмм |
| Пакеттин өлчөмдөрү | 50 x 50 x 50 см |
| Батареялар талап кылынат | No (refers to non-rechargeable, it uses a rechargeable battery) |
8. Кепилдик жана колдоо
Kerbl products are manufactured to high-quality standards and come with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Kerbl webсайт.
For technical support, spare parts, or service inquiries, please contact your local Kerbl dealer or the Kerbl customer service department. Contact information can typically be found on the Kerbl webсайтында же продуктунун таңгагында.
- Өндүрүүчү: Albert Kerbl GmbH
- Бөлүмдүн номери: GT806
