1. Киришүү
This manual provides detailed instructions for the installation, operation, and maintenance of your aigo AZ300 Mid-Tower Computer Case. Please read this guide thoroughly before beginning assembly to ensure proper setup and optimal performance.
Figure 1: aigo AZ300 Mid-Tower Computer Case, showcasing its tempered glass panels and spacious interior.
2. Негизги өзгөчөлүктөрү
- Температуралуу айнек панелдери: Two 4mm-thick tempered glass panels provide a full view ички компоненттеринин.
- Motherboard шайкештиги: Supports ATX and Micro-ATX motherboards.
- Муздатуу системасын колдоо: Flexible configuration for water coolers with radiators of 360mm, 240mm, and 120mm.
- Сактоо параметрлери: Accommodates 2 x 2.5" SSDs and 2 x 3.5" HDDs.
- GPU тазалоо: Maximum GPU length of 400mm.
- Dust Filtration: Equipped with two dust filters, including a top magnetic strip filter and a bottom PSU filter for easy maintenance.
- Алдыңкы I/O панели: Includes 1 x Type-C Port, 1 x USB 2.0 Port, 1 x USB 3.0 Port, 2 x HD Audio jacks, Power button, and Reset button (with LED).
3. Орнотуу жана орнотуу
Follow these steps for proper assembly and installation of components within your aigo AZ300 computer case.
3.1 Component Overview
Figure 2: Internal component layout and compatibility for the aigo AZ300 case. This diagram illustrates placement for ITX, M-ATX, and ATX motherboards, HDD/SSD drives, PSU, and various fan/radiator sizes (120mm, 240mm, 360mm).
3.2 Motherboard орнотуу
The aigo AZ300 supports ATX and Micro-ATX motherboards. Ensure standoffs are correctly aligned for your motherboard size before securing it with screws.
Figure 3: Motherboard mounting areas within the case, indicating support for ITX, M-ATX, and ATX form factors.
3.3 Сактоочу дискти орнотуу
Install up to two 2.5" SSDs and two 3.5" HDDs in the designated bays. Refer to Figure 2 for drive locations.
3.4 Муздатуу системасын конфигурациялоо
The case supports various cooling configurations. Radiators of 360mm, 240mm, and 120mm can be installed in designated areas. Ensure proper airflow for optimal cooling performance.
Видео 1: Бүттүview of the aigo AZ300 Computer Case, demonstrating its features and potential cooling setups.
3.5 Электр менен камсыздоо блогун (PSU) орнотуу
Install the PSU in the bottom mount area. Ensure all cables are routed efficiently for clean cable management and unobstructed airflow.
4. Иштөө нускамалары
The front I/O panel provides convenient access to essential functions and ports.
Figure 4: Front I/O Panel layout, detailing the Type-C, USB 2.0, USB 3.0, Headset, Microphone, Reset/LED, and Power connections.
- Кубат баскычы: Press to power on or off your computer.
- Reset/LED Button: Press to reset the computer or cycle through LED lighting modes (if applicable).
- USB порттору: Connect USB devices to the Type-C, USB 2.0, or USB 3.0 ports. The USB cables are shielded for interference-free data transmission.
- HD Audio Jacks: Connect your headset and microphone to the respective audio jacks.
5. Техникалык тейлөө
Компьютериңиздин корпусунун үзгүлтүксүз техникалык тейлөөсү анын оптималдуу иштешин жана узак мөөнөттүү иштешин камсыз кылат.
5.1 Чаң чыпкасын тазалоо
The aigo AZ300 case is equipped with two dust filters to prevent dust accumulation. The top magnetic strip dust filter and the bottom PSU dust filter are designed for easy removal and cleaning.
- Gently remove the magnetic top filter for cleaning.
- Slide out the bottom PSU filter for cleaning.
- Clean filters with a soft brush or by rinsing with water (ensure they are completely dry before reinstallation).
Figure 5: Top magnetic dust filter, designed for easy removal and cleaning.
6. Кыйынчылыктарды
If you encounter any issues during the installation or operation of your aigo AZ300 computer case, please review the following general tips:
- Кубат маселеси: Ensure all power cables are securely connected to the motherboard, GPU, and power supply unit. Verify the PSU switch is in the "ON" position.
- Компонент ылайыктуу: Double-check that all components (motherboard, GPU, drives) are correctly seated and secured according to their respective manuals.
- I/O Panel Functionality: Confirm that the front I/O panel cables are properly connected to the motherboard headers.
- Ашыкча ысып кетүү: Ensure all fans are spinning correctly and are oriented to provide adequate airflow. Clean dust filters regularly.
Көбүрөөк жардам алуу үчүн, Кепилдик жана колдоо бөлүмүн караңыз.
7. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | Айго |
| Модель аты | AZ300 |
| Иштин түрү | Ара Tower |
| Motherboard шайкештиги | ATX, Micro-ATX |
| Материал | Температуралуу айнек |
| Элемент Салмагы | 19.66 фунт |
| Пакеттин өлчөмдөрү | 21 x 20 x 16 дюйм |
| USB 2.0 порттордун саны | 1 |
| USB 3.0 порттордун саны | 1 |
| Number of USB Type-C Ports | 1 |
| Муздатуу ыкмасы | Аба |
| Кубат менен камсыздоону орнотуу түрү | Төмөнкү тоо |
8. Кепилдик жана колдоо
aigo is committed to providing excellent customer service. If you encounter any quality issues with your aigo AZ300 computer case, please do not hesitate to contact us. We will endeavor to provide prompt assistance and resolve any concerns you may have.
For support, please visit the official aigo store or contact their customer service channels.
