Dasqua 7123-1004 Magnetic Base with Fine Adjustment Instruction Manual

1. Киришүү

The Dasqua 7123-1004 Magnetic Base is a precision tool designed for securely holding dial indicators and other measuring instruments. It features a strong magnetic force, a V-grooved base for versatile mounting, chrome-plated rods, and a fine adjustment mechanism for precise positioning. Its robust construction ensures reliability and accuracy in various industrial and scientific applications.

This image highlights the solid structure with electroplated surfaces and ground end-faces, contributing to the magnetic base's durability and precision.

2. Продукциянын компоненттери

Familiarize yourself with the main components of your Dasqua Magnetic Base:

This diagram labels the key parts:

• Магниттик база: The primary unit containing the permanent magnet and ON/OFF switch.
• Негизги уюл: The vertical rod extending from the base.
• Sub Pole: The horizontal rod, adjustable for reach.
• Lower Fixture: Secures the main pole to the base.
• Upper Fixture: Connects the main pole to the sub pole.
• Жакшы жөндөө: A mechanism for precise, small movements of the indicator.
• Индикатор Clamping Screw: Used to secure a dial indicator or other measuring device.

The image above shows the complete Dasqua 7123-1004 Magnetic Base with its adjustable arm and fine adjustment mechanism, as it appears out of the box.

3. Орнотуу жана орнотуу

1. Пакеттен чыгаруу: Carefully remove the magnetic base and its components from the packaging. Inspect for any damage.
2. Негизги жайгаштыруу:

   Ensure the surface where the magnetic base will be placed is clean, flat, and ferrous (magnetic). The base features a V-groove for secure mounting on cylindrical parts.

   

   This image highlights the V-grooved design on the bottom of the magnetic base, which facilitates stable attachment to round workpieces or surfaces.

3. Магниттин активдештирилиши: Turn the ON/OFF switch on the magnetic base to the "ON" position. This will activate the powerful permanent magnet, securing the base to the ferrous surface.
4. Assembling the Arm: If the arm components (main pole, sub pole, fixtures) are not pre-assembled, connect them as shown in the component diagram (Figure 2.1). Ensure all clamping screws are finger-tight to allow for adjustment.
5. Индикаторду орнотуу: Insert your dial indicator or measuring device into the clamping hole at the end of the sub pole. The clamping holes are designed to accommodate 6mm, 8mm, and 3/8 inch diameter shanks. Tighten the indicator clamping screw to secure the indicator.



This image illustrates the various clamping hole diameters (4mm, 8mm, and 3/8 inch) available on the magnetic base's arm for attaching different indicators.

4. Иштөө нускамалары

1. Базаны жайгаштыруу: With the magnet in the "OFF" position, place the base on the desired ferrous surface. Once positioned, turn the switch to "ON" to secure it. The base provides 132 lbs (60 kg) of holding force.



This image shows the magnetic base and indicates its strong holding power of 132 lbs (60 kg) when the magnet is activated.

2. Колду тууралоо: Клamping screws on the upper and lower fixtures to adjust the main and sub poles to the desired height and angle. The chrome-plated rods allow for smooth movement. Once the approximate position is achieved, tighten the clamping screws firmly.
3. Using Fine Adjustment: For precise positioning of the indicator, use the fine adjustment knob. This mechanism allows for minute movements of the indicator without needing to loosen and readjust the main arm clamps.



This series of diagrams illustrates how the fine adjustment knob operates, enabling precise, small movements of the indicator arm for accurate measurement setup.

4. Disengaging the Magnet: When finished, turn the ON/OFF switch on the magnetic base to the "OFF" position to release the base from the surface.

5. Техникалык тейлөө

• Тазалоо: Keep the magnetic base and its components clean and free from dust, debris, and metal shavings. Use a soft, dry cloth. For stubborn grime, a mild cleaner can be used, ensuring no liquid enters the internal mechanism.
• Сактагыч: Store the magnetic base in a dry, clean environment when not in use. Ensure the magnet is in the "OFF" position during storage to prevent accidental attachment to other tools or surfaces.
• Текшерүү: Periodically inspect the rods for any signs of damage or corrosion. The chrome-plated rods are designed for durability, but proper care extends their lifespan.
• Майлоо: No specific lubrication is typically required for the magnetic base mechanism or rods. Avoid applying oils or greases that could attract metal particles.

6. Кыйынчылыктарды

• Base Not Holding Firmly:
  • Ensure the ON/OFF switch is fully in the "ON" position.
  • Verify the mounting surface is ferrous (magnetic) and clean. Rust, paint, or debris can reduce magnetic force.
  • Check for any gaps between the base and the mounting surface.
• Arm Movement is Stiff:
  • Клamping screws on the fixtures.
  • Clean the rods and inside the clamping mechanisms to remove any accumulated debris.
• Indicator Not Holding Securely:
  • Ensure the indicator's shank diameter matches one of the clamping hole sizes (6mm, 8mm, or 3/8 inch).
  • Tighten the indicator clampбекем сайгыла.

7. Техникалык шарттар

8. Кепилдик жана колдоо

For warranty information and technical support, please refer to the documentation included with your product or contact Dasqua customer service directly. You may also visit the official Dasqua webкошумча жардам үчүн сайт.

Өндүрүүчү: HHIP

Бренд: Dasqua

Модел: 7123-1004