Introduction
This instruction manual provides detailed guidance for the installation, maintenance, and care of your Replace CH1195148 Rear Lower Bumper Valance. Please read this manual thoroughly before proceeding with installation to ensure proper fitment and safe operation. This product is designed as a direct replacement part for specific vehicle applications.
Коопсуздук маалыматы
Always prioritize safety when working on your vehicle. Failure to follow safety precautions may result in injury or damage to the vehicle.
- Тиешелүү жеке коргоочу шаймандарды, анын ичинде коопсуздук көз айнектерин жана кол каптарды кийиңиз.
- Ensure the vehicle is parked on a level surface and properly secured with the parking brake engaged.
- If lifting the vehicle, use appropriate jack stands to support it securely.
- Disconnect the vehicle's battery if working near electrical components.
- Refer to your vehicle's service manual for specific instructions related to bumper removal and installation.
Пакеттин мазмуну
Орнотууну баштоодон мурун бардык компоненттер бар экенин жана бузулбаганын текшериңиз.
- 1 x Replace CH1195148 Rear Lower Bumper Valance
- (Note: Mounting hardware is typically reused from the original part or purchased separately, and is not included unless specified.)
Орнотуу жана орнотуу
This section outlines the general steps for replacing a rear lower bumper valance. Specific procedures may vary depending on your vehicle's make and model. Professional installation is recommended if you are unfamiliar with automotive repairs.
Керектүү куралдар:
- Розетка ачкычтарынын топтому
- Бурагычтар (Phillips жана Flathead)
- Plastic Trim Removal Tools (optional, but recommended)
- Кол каптар жана коргоочу көз айнек
Орнотуу кадамдары:
- Унааны даярдоо: Park the vehicle on a flat, stable surface. Engage the parking brake. If necessary, lift the rear of the vehicle using a jack and secure it with jack stands.
- Remove Existing Valance:
- Locate all fasteners (screws, clips, bolts) securing the existing rear lower bumper valance to the bumper assembly.
- Carefully remove these fasteners using appropriate tools. Pay attention to any hidden clips or tabs.
- Gently detach the old valance from the bumper. Be mindful of any wiring or sensors that may be attached (e.g., parking sensors) and disconnect them if present.
- Текшерүү жана тазалоо:
- Inspect the bumper area for any damage or debris. Clean the mounting surfaces thoroughly.
- Transfer any necessary components (e.g., parking sensors, wiring harnesses) from the old valance to the new Replace CH1195148 valance.
- Install New Valance:
- Align the new Replace CH1195148 valance with the mounting points on the vehicle's rear bumper.
- Carefully push the valance into place, ensuring all clips and tabs engage correctly.
- Reinstall all fasteners (screws, clips, bolts) that were removed earlier. Tighten them securely, but do not overtighten to avoid damaging the plastic.
- Reconnect any wiring or sensors that were disconnected.
- Акыркы текшерүү:
- Visually inspect the installed valance to ensure it is properly seated and secure.
- If the vehicle was lifted, carefully lower it.
1-сүрөт: The Replace CH1195148 Rear Lower Bumper Valance. This image displays the full valance component, showing its overall shape and mounting points. It is a dark-colored plastic component designed to fit the lower rear section of a vehicle's bumper.
Орнотуудан кийинки кам көрүү
Once installed, the bumper valance requires minimal "operation." Its primary function is aesthetic and protective. Ensure it remains securely attached and free from damage.
- Regularly check the valance for any signs of looseness or damage, especially after driving on rough terrain or after minor impacts.
- Clean the valance with standard automotive cleaning products. Avoid harsh chemicals or abrasive materials that could damage the finish.
Техникалык тейлөө
The Replace CH1195148 Rear Lower Bumper Valance is designed for durability and requires minimal maintenance.
- Үзгүлтүксүз текшерүү: Periodically inspect the valance for cracks, chips, or signs of impact. Check the mounting points for any loose fasteners.
- Тазалоо: Wash the valance with mild automotive soap and water. Rinse thoroughly and dry with a soft cloth to prevent water spots.
- Коргоо: Consider applying a UV protectant specifically designed for automotive plastics to help prevent fading and degradation over time.
Проблемаларды чечүү
Орнотуудан кийин көйгөйлөргө туш болсоңуз, төмөнкү жалпы көйгөйлөрдү жана чечимдерди караңыз.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Valance is loose or rattling. | Fasteners not fully tightened; clips not properly engaged; damaged mounting points. | Re-check all fasteners and clips. Ensure they are securely attached. Inspect for damage to the valance or bumper mounting points. |
| Gaps between valance and bumper. | Improper alignment during installation; clips not fully engaged; incorrect part for vehicle. | Remove and re-align the valance, ensuring all clips and tabs snap into place. Verify the part number matches your vehicle's requirements. |
| Valance appears damaged upon receipt. | Жеткирүү зыяны. | Do not install. Contact the seller or manufacturer immediately for assistance and replacement. |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | алмаштыруу |
| Модель номери | CH1195148 |
| Бөлүмдүн абалы | Rear Lower Bumper |
| Материал | Пластик |
| Элемент Салмагы | 11 фунт (болжол менен 5 кг) |
| Продукциянын өлчөмдөрү | 71 x 21.9 x 6.3 дюйм (болжол менен 180 x 55.6 x 16 см) |
| UPC | 191275769218 |
Кепилдик маалымат
This Replace product is typically covered by a limited manufacturer's warranty against defects in materials and workmanship. Specific warranty terms and duration may vary. Please retain your proof of purchase. For detailed warranty information, refer to the documentation included with your purchase or contact the seller directly.
Кардарларды колдоо
If you have any questions regarding the installation, operation, or maintenance of your Replace CH1195148 Rear Lower Bumper Valance, please contact your retailer or the manufacturer's customer service department. When contacting support, please have your product model number (CH1195148) and proof of purchase readily available.
For further assistance, you may also refer to online automotive forums or consult with a certified automotive technician.
