Flamco XStream 11082 Vent-Clean Air and Dirt Separator

Introduction

The Flamco XStream Vent-Clean is an advanced air and dirt separator designed to optimize the performance and efficiency of heating and cooling systems. By effectively removing air and dirt particles, it helps reduce energy consumption and extend the lifespan of system components.

Негизги өзгөчөлүктөрү:

• Reduced energy consumption: Up to 15% less heating system energy consumption.
• Increased system efficiency: Up to 6% more heating system efficiency.
• Flexible installation: Flow direction is not critical, simplifying setup.
• Integrated insulation: Minimizes heat loss for improved thermal performance.
• Effective air and dirt separation: Ensures a cleaner and more efficient system.

Figure 1: Flamco XStream 11082 Vent-Clean Air and Dirt Separator. This image shows the main unit of the air and dirt separator, featuring its black body, red caps, and brass connections, alongside a separate brass fitting.

Орнотуу жана орнотуу

Proper installation is crucial for the optimal performance of the Flamco XStream Vent-Clean. It should be installed in the main flow of the heating or cooling system.

Орнотуу көрсөтмөлөрү:

1. Системаны даярдоо: Орнотуудан мурун системанын басымы түшүрүлгөнүн жана суусу агызылганын текшериңиз.
2. Жайгашкан жери: Install the separator at a point where air and dirt accumulation is most likely, typically in the return line before the boiler or chiller.
3. Багыты: The Flamco XStream Vent-Clean can be installed horizontally or vertically. The design allows for flexible orientation without affecting performance.
4. Байланыштары: Connect the unit using appropriate fittings (DN25 G 1 1/4" M). Ensure all connections are tight to prevent leaks.
5. Системаны толтуруу: After installation, slowly refill the system, allowing air to escape through the automatic air vent on the separator.
6. Алгачкы операция: Monitor the system for any leaks and ensure proper operation.

2-сүрөт: Каптал view dimensions of the Flamco XStream 11082 Vent-Clean. This diagram illustrates various measurements (C, D, E, F, K, B) of the separator from a side perspective, including the 3/4" connection point.

3-сүрөт: Жогорку view dimensions of the Flamco XStream 11082 Vent-Clean. This diagram provides measurements (M, N, R, A, DN, O, P) of the separator from a top-down perspective, highlighting the 1 1/4" connection and overall width.

Иштөө принциптери

The Flamco XStream Vent-Clean operates passively to remove air and dirt from the system fluid. It utilizes a unique internal design to create a low-velocity zone where microbubbles and dirt particles can separate from the fluid.

• Air Separation: Microbubbles rise to the top of the unit and are automatically discharged through the integrated air vent.
• Dirt Separation: Dirt particles, including magnetite, settle at the bottom of the unit due to gravity and are collected in the dirt chamber. The magnetic field assists in collecting ferrous particles.
• Үзгүлтүксүз иштөө: The separation process is continuous as long as the system is in operation, ensuring ongoing protection and efficiency.

Figure 4: Graph illustrating the collection efficiency of dirt and air (microbubbles). The graph compares Flamco XStream's separation rate (red line) against other air and dirt separators (blue line), showing superior performance, especially for magnetite collection over time.

Figure 5: Thermal images comparing heat release efficiency. The image on the left shows a radiator "Without XStream" with cooler areas, while the image on the right shows a radiator "With XStream" with more uniform and efficient heat distribution, indicating up to 60% more efficient heat release.

Техникалык тейлөө

Regular maintenance ensures the continued efficiency and longevity of your Flamco XStream Vent-Clean.

Cleaning the Dirt Separator:

1. Жыштыгы: The dirt chamber should be flushed periodically, depending on the system's condition and the amount of dirt collected. Initially, it may require more frequent flushing.
2. Процедура:
   • Ensure the system is operating under normal pressure.
   • Locate the drain valve at the bottom of the separator.
   • Place a suitable container under the drain valve.
   • Slowly open the drain valve to flush out accumulated dirt and sludge.
   • Close the drain valve once the water runs clear.
3. Magnetic Rod (if applicable): If your model includes a removable magnetic rod, it can be extracted and cleaned separately to remove ferrous particles. Ensure the system is depressurized before removing the magnetic rod.

Air Vent Check:

The automatic air vent typically requires no maintenance. However, ensure it is not obstructed and can freely discharge air. If persistent air issues occur, check for blockages.

Проблемаларды чечүү

Техникалык шарттар

Кепилдик жана колдоо

For warranty information and technical support, please refer to the official Flamco website or contact your local Flamco distributor. Keep your purchase receipt as proof of purchase.

Өндүрүүчү: Flamco

Webсайт: www.flamco.com (Note: This is a generic placeholder for the manufacturer's website, please verify the actual URL.)