Introduction
Thank you for choosing the Lepro 5m RGB LED Strip Light. This product is designed to provide versatile and vibrant lighting for various indoor applications. Featuring high-brightness SMD5050 LEDs, a wide range of colors, and easy installation, it enhances the ambiance of any space. Please read this manual carefully before installation and use to ensure proper operation and safety.
Кутуда эмне бар
Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:
- LED Strip Light (5 meters) x 1
- DC12V Power Adapter x 1
- Connection Receiver x 1
- Алыстан башкаруу x 1
- Instruction Manual (Japanese) x 1
Коопсуздук маалыматы
- Бул продукт үчүн иштелип чыккан үй ичинде гана колдонуу. Сууга же жогорку нымдуулукка дуушар кылбаңыз.
- Орнотуудан же техникалык тейлөөдөн мурун электр кубаты өчүрүлгөнүн текшериңиз.
- Use only the provided DC12V power adapter. Using an incompatible power supply may damage the product or pose a fire hazard.
- LED тилкесин кескин ийбеңиз же ашыкча күч колдонбоңуз, анткени бул чынжырды бузушу мүмкүн.
- Балдар жетпеген жерде сактаңыз.
- If any part of the product is damaged, discontinue use immediately and contact support.
Жайгашуу
Follow these steps for proper installation of your LED strip light:
- Бетти даярдоо: Clean the desired installation surface thoroughly. Ensure it is dry, smooth, and free of dust or oil for optimal adhesive performance.
- Өлчөө жана кесүү (кошумча): If a shorter length is required, cut the LED strip along the designated cut marks (indicated by a scissor icon) using scissors. Эскертүү: Only cut at these specific marks. Cutting elsewhere will damage the strip. Cut sections cannot be reconnected without additional connectors (sold separately).
- Тилкени колдонуңуз: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
- Туташуу компоненттери: Connect the LED strip to the connection receiver, ensuring the arrows on both components align. Then, connect the DC12V power adapter to the receiver.
- Күйгүзүү: Plug the power adapter into a suitable power outlet. Remove the insulation sheet from the remote control before first use. Point the remote control towards the receiver and press the power button to turn on the lights.
Иштөө нускамалары
The LED strip light is controlled using the included 44-key remote control. Ensure the remote is pointed towards the receiver for effective operation.
Алыстан башкаруу функциялары:
- Күйгүзүү/өчүрүү: басыңыз кызыл кубат баскычы чырактарды күйгүзүү же өчүрүү үчүн.
- Жарыктыкты жөндөө: колдонуу өйдө жана ылдый жебе баскычтары (labeled 'Brightness Adjust') to increase or decrease the light intensity.
- Түс тандоо: ичинен тандаңыз 20 алдын ала коюлган түстөр by pressing the corresponding color buttons.
- DIY режимдери: The DIY1-DIY6 buttons allow you to create and save custom colors by adjusting the Red, Green, and Blue intensity using the RGB arrow buttons.
- Динамикалык режимдер:
- ТЕЗ/ЖАЯН: Динамикалык режимдердин ылдамдыгын жөндөңүз.
- АВТО: Cycles through all dynamic modes automatically.
- ФЛЕШ: Flashes through colors.
- JUMP3/JUMP7: Jumps between 3 or 7 colors.
- FADE3/FADE7: Fades between 3 or 7 colors.
Техникалык тейлөө
- Тазалоо: Ensure the power is off and unplugged before cleaning. Gently wipe the LED strip with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
- Сактагыч: If storing the strip for an extended period, ensure it is clean and dry. Roll it loosely to prevent damage to the LEDs or circuit. Store in a cool, dry place away from direct sunlight.
- Жабышкак кам көрүү: The 3M adhesive is strong, but repeated removal and reapplication may reduce its effectiveness.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| LED тилкеси күйбөйт. | 1. Power adapter not plugged in. 2. Remote control insulation sheet not removed. 3. Connections are loose or incorrect. 4. Remote control battery is dead. | 1. Ensure power adapter is securely plugged into an outlet. 2. Remove the clear plastic insulation sheet from the remote control battery compartment. 3. Check all connections, ensuring arrows align between the strip and receiver. 4. Replace the remote control battery (CR2025 or equivalent). |
| Алыстан башкаруу пульту жооп бербей жатат. | 1. Remote not pointed at receiver. 2. Obstruction between remote and receiver. 3. Remote control battery is dead. | 1. Point the remote directly at the receiver. 2. Remove any objects blocking the line of sight. 3. Алыстан башкаруунун батареясын алмаштырыңыз. |
| Some sections of the strip are not lighting up. | 1. Damage to the LED strip. 2. Incorrect cutting. | 1. Inspect the strip for physical damage. If damaged, contact support. 2. Ensure cuts were made only at designated marks. |
Техникалык шарттар
- Модель номери: PR410082-RGB-JP
- Бренд: Лепро
- Жарык булагы түрү: LED (SMD5050)
- LED саны: 150 LEDs (30 LEDs per meter)
- Strip Length: 5 метр
- Энергияны керектөө: 18 Вт
- Киргизүү көлөмүtage: DC12V 1.5A
- Түс параметрлери: RGB (20 preset colors + DIY modes)
- Башкаруу ыкмасы: 44-key IR Remote Control
- Ички/тышкы колдонуу: Indoor
- Өзгөчөлүктөр: Dimmable, Cuttable, 3M Adhesive, PSE Certified
- Пакеттин көлөмү: 13.1 x 10.7 x 6.7 см; 230 г
Кепилдик жана колдоо
This Lepro LED Strip Light comes with a 2 жылдык кепилдик. If you encounter any issues or have questions regarding the product, please contact Lepro JP customer support through the retailer's platform. Provide your order details and a description of the issue for prompt assistance.
For further assistance, you can visit the official Lepro store on Amazon: Lepro Amazon дүкөнү
