1. Коопсуздук нускамалары
Always read and understand all safety instructions before operating the Scheppach HM216SPX radial miter saw. Failure to follow these instructions can result in serious injury or death.
- Тийиштүү жеке коргонуу каражаттарын (ЖКК) кийиңиз: Дайыма коргоочу көз айнек, угууну коргоо жана чаң маскасын тагыныңыз.
- Жумуш ордун таза жана жарыктандырыңыз: Башаламан же караңгы жерлер кырсыкка чакырат.
- Жарылуучу атмосферада иштебеңиз: Электр шаймандарын күйүүчү суюктуктар, газдар же чаң бар жерде колдонбоңуз.
- Коопсуз жумуш бөлүгү: Ар дайым clamp or otherwise secure the workpiece firmly before cutting.
- Maintain proper balance and footing: аша чаап алба.
- Туура бычакты колдонуңуз: Ensure the saw blade is sharp, clean, and suitable for the material being cut.
- Keep hands clear of the blade path: Never place hands near the rotating blade.
- Unplug before making adjustments or maintenance: Always disconnect the saw from the power source.
2. Продукт бүтүп калдыview
The Scheppach HM216SPX is a stable and lightweight radial miter saw designed for precise cutting of various materials, primarily wood. It features a powerful 2000W motor and a 210mm diameter saw blade, making it suitable for both longitudinal and angular cuts.
2.1-сүрөт: The Scheppach HM216SPX radial miter saw, showcasing its robust design and including two saw blades for versatile use.
2.2-сүрөт: Examples of applications for the HM216SPX, including cutting skirting boards, angular cuts, wooden beams, assembly wood, and laminate/parquet.
2.3-сүрөт: Key features of the saw: 2000W power, 230-240V~/50Hz power supply, integrated laser for precise cuts, and a compact design for easy handling and storage.
3. Орнотуу
Before first use, ensure the saw is properly assembled and secured.
3.1 Таңгактан чыгаруу жана чогултуу
- Бардык компоненттерди таңгактан кылдаттык менен алып салыңыз.
- Attach any loose components as per the assembly diagram (refer to the separate assembly guide if provided).
- Бардык бурамалар жана бекиткичтер бекем бекитилгенин текшериңиз.
3.2 Securing the Saw
For stable and safe operation, it is highly recommended to secure the miter saw to a workbench or a stable stand.
- Тийиштүү болтторду же клапандарды колдонуңузamps to fasten the saw through the designated mounting holes in its base.
- Ensure the workbench or stand is level and can support the weight and forces generated during operation.
3.3 Adjusting Extensions
3.1-сүрөт: The extendable rear support ensures stable seating, especially during angular cuts. Adjust it to provide optimal support for your workpiece.
3.2-сүрөт: Utilize the left and right extensions to support longer workpieces, ensuring stability and accuracy during cutting operations.
4. Иштөө нускамалары
Familiarize yourself with the saw's controls and functions before beginning any cutting tasks.
4.1 Күйгүзүү/өчүрүү
- Connect the power cord to a suitable 230-240V~/50Hz power outlet.
- To start the saw, press the power switch. To stop, release the switch.
4.2 Adjusting Cutting Angles
4.1-сүрөт: The miter table can be oriented from 45° to -45° for various angular cuts. Loosen the locking knob, adjust to the desired angle, and re-tighten.
4.2-сүрөт: The saw head can be inclined to the left from 0° to 45° for bevel cuts. Adjust the inclination using the designated lever and secure it.
4.3 Лазердик жол көрсөткүчтү колдонуу
The integrated laser provides a visual guide for your cut line, enhancing precision.
- Activate the laser using its dedicated switch (if available).
- Align the laser line with your marked cut line on the workpiece.
- Эскертүү: The laser line indicates the cutting path, which has the width of the saw blade.
4.4 Кесүү
4.3-сүрөт: A user demonstrating the operation of the miter saw, making a precise cut on a wooden board. Always ensure the workpiece is stable and hands are clear.
4.4-сүрөт: The double slide rails allow for precise cuts up to 340 mm in width. Utilize the full range of motion for wider materials.
- Position the workpiece against the fence and secure it.
- Lower the saw blade slowly into the workpiece, allowing the blade to reach full speed before engaging.
- Apply steady, even pressure throughout the cut.
- Once the cut is complete, allow the blade to stop rotating before raising the saw head.
5. Техникалык тейлөө
Үзгүлтүксүз тейлөө сиздин митер арааңыздын узак мөөнөттүү жана оптималдуу иштешин камсыз кылат.
5.1 Тазалоо
- After each use, disconnect the saw from power and clean off sawdust and debris using a brush or compressed air.
- Pay special attention to the blade guard, motor vents, and sliding mechanisms.
- Эриткичтерди же абразивдик тазалагычтарды колдонбоңуз.
5.2 Blade алмаштыруу
- Always disconnect the saw from the power supply before changing the blade.
- Refer to the saw's specific instructions for accessing and removing the blade.
- Use only 210mm diameter blades with a 30mm bore, suitable for the saw's maximum RPM.
- Ensure the new blade is installed with the teeth pointing in the correct direction.
5.3 Майлоо
- Periodically apply a light machine oil to the sliding mechanisms to ensure smooth operation.
- Avoid over-lubrication, which can attract dust.
6. Кыйынчылыктарды
Бул бөлүмдө сиз кескич араа менен кездешүүчү кеңири таралган көйгөйлөр каралат.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Сау башталбайт | Электр энергиясы жок; Туура эмес өчүргүч; Мотор ашыкча жүктөө | Check power connection; Test outlet; Contact qualified service personnel |
| Туура эмес кесүүлөр | Blade dull or damaged; Fence not square; Laser misaligned | Replace blade; Check and adjust fence squareness; Calibrate laser (if adjustable) |
| Ашыкча титирөө/ызы -чуу | бош бычак; бузулган бычак; Эскирген подшипниктер | Tighten blade arbor nut; Replace blade; Contact qualified service personnel |
| Лазер иштебейт | Laser switch off; Laser unit faulty | Turn on laser switch; Contact qualified service personnel |
7. Техникалык шарттар
Technical data for the Scheppach HM216SPX Radial Miter Saw.
7.1-сүрөт: Visual representation of maximum cut dimensions and blade specifications. Max cut width: 340 mm, Max cut height: 65 mm. Blade size: 210 x 30 mm, with options for 24 or 48 teeth. Indicates robust construction.
| Спецификация | Нарк |
|---|---|
| Модел | HM216SPX |
| Күч | 2000 Ватт |
| Тtage | 230 вольт |
| Бычактын диаметри | 210 мм |
| Blade Bore | 30 мм |
| Ылдамдык | 4800 об/мин |
| Max Cut Width | 340 мм |
| Max Cut Height | 65 мм |
| Продукциянын өлчөмдөрү (L x W x Y) | 74 x 60 x 50 см |
| Салмагы | 12.15 кг |
| Кордун узундугу | 2 метр |
| Өзгөчөлүктөр | Bevel capacity, Laser guide |
| Сертификация | CE |
8. Кепилдик жана колдоо
The Scheppach HM216SPX Radial Miter Saw comes with a limited warranty. Please retain your proof of purchase for warranty claims.
8.1 Кепилдик маалыматы
- For details regarding the specific terms and conditions of your limited warranty, please refer to the warranty card included with your product or visit the official Scheppach webсайт.
- The warranty typically covers defects in materials and workmanship under normal use.
8.2 Кардарларды колдоо
- If you encounter any issues not covered in the troubleshooting section, or require technical assistance, please contact Scheppach customer support.
- Have your product model number (HM216SPX) and serial number (if applicable) ready when contacting support.
