1. Киришүү
This manual provides detailed instructions for the installation, operation, and maintenance of your ELEGANT Semi-Frameless Sliding Shower Door. Please read all instructions carefully before beginning installation to ensure safe and correct assembly and use. Retain this manual for future reference.
Image 1.1: ELEGANT Semi-Frameless Sliding Shower Door, 60x72 inches, Black Finish.
2. Коопсуздук маалыматы
- Орнотуу учурунда ар дайым коргоочу көз айнек тагыныңыз.
- Айнек панелдерди өтө этияттык менен колдонуңуз. Чыңалган айнек бекем болгону менен, четтерине же бурчтарына тийсе, сынып кетиши мүмкүн.
- Орнотуу бетинин (дубалдардын, полдун) бекем жана тегиз экенине ынаныңыз.
- Professional installation is recommended for optimal safety and performance.
- Do not overtighten screws, especially those attaching to glass, as this can cause damage.
- Балдарды жана үй жаныбарларын орнотуу аянтынан алыс кармаңыз.
3. Бөлүктөр тизмеси
Verify all parts are present before beginning installation. If any parts are missing or damaged, contact customer support.
- Чыңалган айнек панелдер (2)
- Top Rail Track
- Төмөнкү жетектөөчү темир жол
- Wall Profiles/Aluminum Frame components
- Sliding Rollers/Wheels
- Long Handle (1)
- Interior Knobs (2)
- Anti-Crash Angles
- Clear Shower Door Seal Strips
- Бекиткичтер жана буроолор
4. Керектүү куралдар
- Өлчөө лентасы
- Карандаш
- Деңгээл
- Бургулоо
- Drill Bits (e.g., 1/4 inch or 8mm for wall anchors, as per specific instructions)
- Бурагыч (Phillips баш)
- Caulking Gun and Silicone Sealant (waterproof)
- Utility Knife or Saw (for cutting guide/rail if adjustment is needed)
- Коопсуздук көз айнек
- Колкаптар
5. Орнотуу жана орнотуу
Follow these steps carefully for proper installation. Refer to the included illustrated instructions for visual guidance.
5.1. Орнотуу аянтын даярдаңыз
- Ensure the shower base or tub is level and securely installed.
- Measure the width of your shower opening at the top, middle, and bottom to confirm compatibility with the door's adjustable range (58.5 in. to 60 in. for this model).
- Clean the wall surfaces where the shower door will be installed.
5.2. Width Adjustment (if necessary)
The top and bottom rail tracks can be cut to fit your specific bathroom width, allowing for a maximum adjustment of 1.5 inches.
- Measure the exact required width.
- Carefully mark the cutting line on the top and bottom rail tracks.
- Use an appropriate saw to cut the tracks to the desired length. Ensure cuts are straight and clean.
Image 5.2: Illustration of width adjustment for the rail tracks.
5.3. Install Wall Profiles and Aluminum Frame
- Дубалды профессионалдуу түрдө жайгаштырыңызfiles vertically on the shower walls, ensuring they are plumb using a level.
- Mark the drilling points through the pre-drilled holes in the wall profiles.
- Drill holes at the marked points. Insert wall anchors if required for your wall type.
- Wall pro коргойтfiles to the walls using the provided screws.
- Attach the top and bottom aluminum frame components to the wall profiles, ensuring they are level.
Image 5.3: Detail of the aluminum frame, emphasizing its stable structure.
5.4. Install Bottom Guide Rail
The bottom guide rail is designed to be flush with the surface, creating a leak-proof barrier.
- Place the bottom guide rail along the shower base or tub edge, centered between the wall profiles.
- Secure it according to the specific instructions, often involving screws or adhesive.
- Apply a small amount of waterproof silicone sealant at both ends of the guide block within the bottom rail to keep it in place and prevent movement when sliding doors.
Image 5.4: The bottom guide rail, designed for a leak-proof seal.
5.5. Install Glass Panels and Rollers
- Attach the sliding rollers/wheels to the top edge of the glass panels as per the diagram. Ensure screws are snug but not overtightened.
- Carefully lift each glass panel and hang the rollers onto the top rail track.
- Guide the bottom edge of the glass panels into the bottom guide rail.
- Test the sliding motion of both panels to ensure smooth operation.
Image 5.5: Certified 1/4 inch (6mm) tempered glass for safety.
5.6. Install Handles and Knobs
- Attach the long handle to the outside of one sliding glass panel. This handle can also serve as a towel rack.
- Attach the two interior knobs to the inside of the glass panels.
- Ensure all handles and knobs are securely fastened without overtightening.
Image 5.6: The durable aluminum alloy handle.
5.7. Install Anti-Crash Angles and Seal Strips
- Install the high-quality anti-crash angles at the ends of the sliding path to protect the wall and glass from impact.
- Apply the full-length clear shower door seal strips along the edges of the glass panels to prevent water leaks.
Image 5.7: Anti-crash angles protect the wall from scratches.
5.8. Пломбалоо
- Apply a continuous bead of waterproof silicone sealant along the exterior joints where the wall profiles meet the wall and where the bottom guide rail meets the shower base/tub.
- Allow the sealant to cure completely (typically 24-48 hours) before using the shower.
6. Иштөө нускамалары
The ELEGANT Semi-Frameless Sliding Shower Door features a double sliding design, allowing both glass panels to move smoothly.
- To open or close the door, gently grasp the handle or interior knob and slide the glass panel along the top and bottom tracks.
- Avoid forcing the doors. If resistance is felt, inspect the tracks for obstructions or debris.
7. Техникалык тейлөө
Душ кабинаңыздын эшигинин узакка кызмат кылуусун жана көрүнүшүн үзгүлтүксүз тазалоо жана техникалык тейлөө камсыздайт.
- Айнек тазалоо: Clean glass panels regularly with a soft cloth and a non-abrasive glass cleaner. Avoid harsh chemicals or abrasive pads that can scratch the glass or damage protective coatings.
- Аппараттык тазалоо: Wipe down black hardware with a soft, damp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз, анткени алар финишке зыян келтириши мүмкүн.
- Жолду тейлөө: Keep the top and bottom tracks free of soap scum, hair, and debris to ensure smooth sliding operation. Use a small brush or vacuum to clear any blockages.
- Тыгыздоочу тилкелер: Periodically check the clear seal strips for wear or damage. Replace if necessary to maintain water-tightness.
8. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Эшик жылмакай жылбайт. | Жолдордогу сыныктар, туура эмес тизилген роликтер же эскилиги жеткен роликтер. | Clean tracks thoroughly. Check roller alignment and adjust if needed. Replace rollers if worn. |
| Water leaks from the door. | Damaged or improperly installed seal strips, insufficient sealant, or misaligned door. | Inspect and adjust seal strips. Reapply silicone sealant where necessary. Ensure door is properly aligned and plumb. |
| Glass panel appears loose. | Roller screws are loose. | Gently tighten the screws attaching the rollers to the glass panels. Do not overtighten. |
9. Техникалык шарттар
- Модел: B020-6072CO-C
- Өлчөмдөрү: 60 дюйм (W) x 72 дюйм (H)
- Width Adjustment Range: 58.5 дюймдан 60 дюймга чейин
- Айнектин калыңдыгы: 1/4 inch (6mm) tempered glass
- Glass Certification: ANSI certified
- Аппараттык түс: Black Finish
- Материал: Stainless Steel (hardware), Aluminum (frame)
- Элемент Салмагы: Болжол менен 105 фунт
- Ассамблея талап кылынат: Ооба
Image 9.1: Dimensional diagram of the ELEGANT shower door.
10. Кардарларды колдоо кызматы
For any questions, missing parts, or assistance with installation, please contact ELEGANT customer service. Our service representatives are available to help you.
Кайтаруулар: Бул продукт 30 күн жеңил кайтарууга укуктуу.
Көбүрөөк маалымат алуу үчүн, киргиле ELEGANT Store on Amazon.
