1. Киришүү
Thank you for choosing the lightmaXX LED Blinder 2. This professional stage lighting fixture is designed to provide powerful and versatile illumination for various applications. Featuring two 50-watt warm white COB LEDs, DMX control, and a strobe function, it offers robust performance and flexible integration into your lighting setup. Please read this manual thoroughly before operation to ensure safe and optimal use of your device.
2. Коопсуздук нускамалары
Электр шокунун, өрттүн же жаракаттын алдын алуу үчүн ар дайым төмөнкү коопсуздук чараларын сактаңыз:
- Бул аппарат кесипкөй колдонуу үчүн гана.
- электр менен жабдууну камсыз кылуу voltage түзмөктүн талаптарына жооп берет.
- Аппаратты жамгырга же нымга тийгизбеңиз.
- Аппаратты ар дайым жерге туташтырылган розеткага туташтырыңыз.
- Корпусун ачпаңыз. Ичинде колдонуучу тейлей турган бөлүктөр жок. Бардык тейлөөлөрдү квалификациялуу кызматкерлерге тапшырыңыз.
- Жарык булагына түздөн-түз көз тийбеңиз.
- Ашыкча ысып кетүүнүн алдын алуу үчүн аппараттын айланасында жетиштүү желдетүүнү камсыз кылыңыз.
- Always secure the device with a safety cable when mounting overhead.
- Тазалоо же тейлөө алдында электр кубатынан ажыратыңыз.
3. Продукт бүтүп калдыview
The lightmaXX LED Blinder 2 features a robust design with two powerful COB LEDs and intuitive controls.
Сүрөт 3.1: Алдыңкы view of the lightmaXX LED Blinder 2, showing the two illuminated COB LEDs.
Сүрөт 3.2: Алдыңкы view of the lightmaXX LED Blinder 2, illustrating the power cable connection point.
Figure 3.3: Rear panel of the lightmaXX LED Blinder 2, detailing the control display, DMX In/Out, Power In/Out, and safety rope attachment point.
Figure 3.4: Close-up of the control panel, showing the digital display and navigation buttons (MENU, UP, DOWN, ENTER).
3.1 Компоненттер
- 2 x 50W Warm White COB LEDs
- Digital Display and Control Buttons (MENU, UP, DOWN, ENTER)
- DMX In/Out (3-pin XLR)
- Power In/Out (IEC)
- Жөнгө салынуучу монтаждык кашаа
- Safety Rope Attachment Point
4. Орнотуу
4.1 Монтаждоо
The lightmaXX LED Blinder 2 comes with a versatile mounting bracket for truss, floor, or stand mounting. Ensure the mounting surface or structure can safely support the weight of the fixture. Always use a safety cable (not included) when mounting the unit overhead to prevent accidental falls.
- Attach the mounting bracket securely to a truss clamp же тур.
- Adjust the angle of the fixture using the side knobs on the bracket.
- Connect a safety cable from the fixture's safety rope attachment point to the mounting structure.
4.2 Кубат туташтыруу
Connect the supplied power cable to the "POWER IN" IEC connector on the rear of the unit and then to a suitable grounded power outlet. The "POWER OUT" connector allows for daisy-chaining power to multiple units (check maximum power draw before connecting multiple units).
4.3 DMX туташуу (кошумча)
For DMX control, connect a DMX cable from your DMX controller's output to the "DMX IN" port on the blinder. To daisy-chain multiple DMX fixtures, connect a DMX cable from the "DMX OUT" port of the first blinder to the "DMX IN" port of the next fixture in the chain. Terminate the last fixture in the DMX chain with a DMX terminator.
5. Иштөө нускамалары
5.1 Башкаруу панелинин иштеши
Use the four buttons on the rear panel to navigate the menu and adjust settings:
- МЕНЮ: Enters the menu or goes back to the previous menu level.
- Өйдө: Scrolls up through menu options or increases a value.
- ТӨМӨН: Scrolls down through menu options or decreases a value.
- КИРҮҮ: Тандоону ырастайт же субменюга кирет.
5.2 DMX Modes and Channel Assignment
The lightmaXX LED Blinder 2 supports 6 DMX channels. Refer to the DMX chart below for specific channel functions. Set the DMX address using the control panel. The default DMX address is A001.
| Канал | Функция | Нарк диапазону | Description |
|---|---|---|---|
| 1 | Мастер Диммер | 0-255 | 0 = Off, 1-255 = Dimmer (0-100%) |
| 2 | LED 1 Диммер | 0-255 | 0 = Off, 1-255 = Dimmer (0-100%) for LED 1 |
| 3 | LED 2 Диммер | 0-255 | 0 = Off, 1-255 = Dimmer (0-100%) for LED 2 |
| 4 | Строб эффекти | 0-255 | 0 = No Strobe, 1-127 = Strobe Speed, 128-255 = Pulse/Random Strobe |
| 5 | Камтылган программалар | 0-255 | Selects various pre-programmed light shows |
| 6 | Программанын ылдамдыгы | 0-255 | Adjusts the speed of selected built-in programs |
5.3 Standalone Modes
The blinder can operate without a DMX controller using its built-in programs or sound-activated mode. Access these modes via the control panel menu.
- Авто режим: Cycles through pre-programmed light sequences.
- Үн активдүү режими: The light reacts to ambient sound via the built-in microphone.
- Manual Dimmer: Adjust the brightness of each LED directly from the menu.
6. Техникалык тейлөө
Regular maintenance ensures the longevity and optimal performance of your lightmaXX LED Blinder 2.
- Тазалоо: Disconnect the power before cleaning. Use a soft, lint-free cloth to wipe the exterior. For stubborn dirt, a slightly damp кездеме колдонсо болот. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
- Fan and Vent Cleaning: Periodically check and clean the cooling fan and ventilation openings to ensure proper airflow and prevent overheating. Use compressed air to remove dust.
- Кабелдик текшерүү: Regularly inspect power and DMX cables for any signs of damage (cuts, frayed wires). Replace damaged cables immediately.
- Сактагыч: When not in use, store the fixture in a dry, dust-free environment, preferably in its original packaging or a suitable flight case.
7. Кыйынчылыктарды
If you encounter issues with your lightmaXX LED Blinder 2, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Күч жок | Power cable disconnected; no power from outlet; blown fuse. | Check power cable connection; test outlet with another device; check and replace fuse if necessary (refer to qualified technician). |
| DMX көзөмөлү жок | Incorrect DMX address; faulty DMX cable; no DMX signal from controller; DMX terminator missing. | Verify DMX address matches controller; test DMX cable; ensure DMX controller is sending signal; add DMX terminator to the last fixture. |
| Lights flicker or behave erratically | Poor DMX signal; electrical interference; overheating. | Check DMX cable quality and connections; ensure proper grounding; provide adequate ventilation. |
| Бирдик ашыкча ысып жатат | Blocked ventilation; operating in high ambient temperature. | Clear all ventilation openings; ensure sufficient space around the unit for airflow; operate within specified temperature range. |
If the problem persists after trying these solutions, please contact lightmaXX customer support or your authorized dealer.
8. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | lightmaXX |
| Модель номери | LIG0016526-000 |
| Жарык булагы | 2 x 50W COB Warm White LEDs |
| DMX каналдары | 6 канал |
| Башкаруу режимдери | DMX, Auto, Sound Active, Manual |
| Өлчөмдөрү (L x W x Y) | 31.2 x 18.7 x 18.5 см (болжол менен 12.28 x 7.36 x 7.28 дюйм) |
| Power Source | Электр зымдары |
| Орнотуу түрү | Ceiling Mount (with bracket) |
| Түс | Кара |
9. Кепилдик жана колдоо
Specific warranty information for the lightmaXX LED Blinder 2 is not provided in this manual. Please refer to your purchase documentation, the lightmaXX official website, or contact your retailer for details regarding warranty coverage and terms.
For technical support, service, or spare parts inquiries, please contact lightmaXX customer service or your authorized dealer. Ensure you have your model number (LIG0016526-000) and purchase date available when contacting support.
Manufacturer: lightmaXX
