INTEX SX925 Krystal тунук кум чыпкасы бассейн насосунун колдонуучу колдонмосу

1. Киришүү жана Продукт бүттүview

The INTEX SX925 Krystal Clear Sand Filter Pool Pump is designed to provide superior water circulation and filtration for above-ground pools. Utilizing Hydro Aeration Technology, it enhances water clarity and freshness by improving aeration and increasing negative ions at the water surface. This manual provides essential information for the safe and efficient operation and maintenance of your sand filter pump.

Figure 1.1: INTEX SX925 Krystal Clear Sand Filter Pool Pump. This image shows the complete sand filter pump unit, including the filter tank, pump motor, and multi-port valve, ready for connection to a pool system.

2. Коопсуздук чаралары

Always read and follow all instructions carefully before installing, operating, or maintaining this product. Failure to do so can result in serious injury or property damage. Keep this manual for future reference.

• Насостун жерге туташтырылган электр розеткасына туташтырылганын жана ал жерге туташтыруучу бузулуу чынжырын үзгүч (GFCI) менен корголгонун текшериңиз.
• Электр шнур же сайгыч бузулуп калса, насосту иштетпеңиз.
• Адамдар бассейнде болгондо насосту эч качан иштетпеңиз.
• Балдарды насостон жана электр туташууларынан алыс кармаңыз.
• Кандайдыр бир техникалык тейлөө же тейлөө иштерин жүргүзүүдөн мурун электр кубатынан ажыратыңыз.
• Бул продукт Калифорния штатында рак жана тубаса кемтик же башка репродуктивдүү зыян алып келген химиялык заттарды камтыйт.

3. Компоненттер жана Ассамблея

Before beginning assembly, ensure all parts are present and undamaged. Refer to the packing list provided with your product for a complete inventory.

3.1 Пакеттин мазмуну

• Кум чыпкалоочу бак
• Насос мотору
• Multi-Port Valve
• (2) 1.25-inch Connector Hoses
• 25-foot Power Cord with GFCI
• Hydro Aeration Technology Inlet Fitting
• Басым өлчөгүч

3.2 Чогултуу кадамдары

1. Place the sand filter tank on a firm, level surface near your pool.
2. Fill the filter tank with the recommended amount of filter sand (approximately 14.3 lbs of #20 Silica sand).
3. Attach the multi-port valve to the top of the filter tank, ensuring a secure seal.
4. Connect the pump motor to the filter tank.
5. Connect the two 1.25-inch connector hoses between the pump and the pool's inlet and outlet fittings. Ensure the Hydro Aeration Technology inlet fitting is properly installed.
6. Суу агып кетпеши үчүн бардык туташуулардын бекем болушун текшериңиз.

Figure 3.1: Setup of the Krystal Clear Sand Filter Pump. This image illustrates a person connecting the hoses of the sand filter pump to an above-ground pool, demonstrating the ease of installation.

4. Иштөө нускамалары

The SX925 sand filter pump features a user-friendly control panel and a multi-port valve for various operational modes.

4.1 Control Panel and Timer

The pump is equipped with a built-in 24-hour timer, allowing you to set pre-programmed cycles from 2 to 12 hours for automatic operation. This feature simplifies daily pool maintenance.

Figure 4.1: Control Panel and Timer. This image highlights the digital display and buttons on the pump's control panel, used for setting the timer and managing pump functions.

4.2 Көп порттуу клапандын функциялары

The multi-port valve allows you to select different modes of operation for your sand filter system:

• Чыпка: Бассейн суусун кадимкидей чыпкалоо үчүн. Суу кум катмары аркылуу агып өтүп, таштандыларды кармап калат.
• Артка жуу: For cleaning the sand filter. Water flows in reverse through the sand bed, dislodging trapped debris and sending it to waste.
• Чайкоо: Used after backwashing to settle the sand bed and flush out any remaining dirty water before returning to filter mode.
• Таштандыларды/дренаждарды: For bypassing the filter and directly draining water from the pool, useful for lowering water levels or vacuuming heavy debris directly to waste.
• Кайра жүгүртүү: For circulating pool water without filtering, useful for distributing chemicals.
• Жабык: Shuts off all flow to the filter and pump. Use only when the pump is off.

Figure 4.2: Multi-Port Valve. This close-up shows the handle and settings of the multi-port valve, indicating the various operational modes such as Filter, Backwash, and Rinse.

4.3 Hydro Aeration Technology

The integrated Hydro Aeration Technology enhances water quality by injecting air into the water. This process leads to:

• Кан айланууну жана чыпкалоонун жакшырышы: Air bubbles accelerate water circulation, causing fine particles to clump together, making them easier to filter.
• Improved Water Clarity: Aeration oxidizes iron and manganese, removing them from the water and improving clarity.
• Increased Freshness: More negative ions are generated, improving overall air quality around the pool.

Figure 4.3: Hydro Aeration Technology in action. This image shows the water inlet jet releasing aerated water into the pool, demonstrating the enhanced circulation and bubble generation.

5. Техникалык тейлөө жана кам көрүү

Regular maintenance ensures the longevity and optimal performance of your sand filter pump.

5.1 Чыпканы кайра жуу

Backwashing is crucial for cleaning the sand filter. Perform backwashing when the pressure gauge reading increases by 3-5 PSI above the clean filter operating pressure, or when water flow significantly decreases.

1. Насосту өчүрүңүз.
2. Көп порттуу клапандын туткасын "АРТКЫ ЖУУ" абалына буруңуз.
3. Turn on the pump and run until the water in the sight glass (if available) runs clear (typically 2-3 minutes).
4. Насосту өчүрүңүз.
5. Көп порттуу клапандын туткасын "ЧАЙКОО" абалына буруңуз.
6. Насосту күйгүзүп, 30-60 секунд иштетиңиз.
7. Насосту өчүрүңүз.
8. Көп порттуу клапандын туткасын кайра "ФИЛЬТ" абалына буруңуз.
9. Кадимки иштеши үчүн насосту күйгүзүңүз.

Figure 5.1: Pressure Gauge. This close-up shows the pressure gauge, which indicates the internal pressure of the filter system and helps determine when backwashing is needed.

5.2 Кумду алмаштыруу

Filter sand typically needs to be replaced every 5 years, depending on usage and water quality. Refer to the detailed instructions in the full user manual for the sand replacement procedure.

6. Кыйынчылыктарды

This section addresses common issues you might encounter with your sand filter pump.

7. Продукттун спецификациялары

Detailed technical specifications for the INTEX SX925 Krystal Clear Sand Filter Pool Pump.

Figure 7.1: Key Specifications. This graphic summarizes important specifications such as system flow rate, sand capacity, pool size compatibility, and voltage.

8. Кепилдик жана Кардарларды колдоо

Intex designs, builds, and tests all its products to the highest standards, prioritizing safety and durability. For detailed warranty information, product registration, or technical assistance, please refer to the official Intex webсайтка же кардарларды тейлөөгө кайрылыңыз.

You can also refer to the official User Manual PDF for more comprehensive information:

Колдонуучунун расмий колдонмосун жүктөп алыңыз (PDF)