1. Киришүү
Thank you for choosing the Nilight 12-inch 300W LED Light Bar. This manual provides essential information for the safe installation, operation, and maintenance of your new off-road lighting system. Please read these instructions thoroughly before installation and retain them for future reference.
2. Коопсуздук маалыматы
- Кандайдыр бир электрдик жумуштарды аткаруудан мурун дайыма унаанын аккумуляторун ажыратыңыз.
- Кыска туташуулардын алдын алуу үчүн бардык зымдарды туташтыруу бекем жана тийиштүү түрдө изоляциялангандыгын текшериңиз.
- Жарык тилкеси күйүп турганда ага түз карабаңыз, анткени ал көздүн чарчоосуна же зыян келтириши мүмкүн.
- Mount the light bar securely to prevent it from dislodging during vehicle operation.
- Verify that the installation complies with all local and national regulations regarding vehicle lighting.
- Use only the provided wiring harness and fuses, or replacements with equivalent specifications.
3. Пакеттин мазмуну
Сураныч, бардык компоненттер бар экенин текшерүү үчүн пакетти текшериңиз:
- 1 x Nilight 12-inch 300W LED Light Bar
- 1 x 12V 5-Pin Rocker Switch
- 1 x 16AWG Wiring Harness Kit (2-lead, 12 feet extendable)
- 2 x Adjustable Mounting Brackets
- Assorted Fuses
- Монтаждоочу жабдуулар (болт, гайкалар, шайбалар)
This image displays the Nilight 12-inch LED light bar, featuring a triple-row spot and flood combo beam design, along with its comprehensive wiring harness kit. The kit includes a 12V 5-pin rocker switch, 16AWG wiring, and various blade fuses for installation.
4. Орнотуу жана орнотуу
Professional installation is recommended. If installing yourself, ensure you have basic electrical knowledge and proper tools.
4.1 Жарык тилкесин орнотуу
- Монтаждоо ордун тандаңыз: Select a sturdy surface on your vehicle that can support the weight of the light bar and provide optimal light projection. Common locations include bumpers, roof racks, or grille guards.
- Позиция кашаалары: Attach the adjustable mounting brackets to the light bar using the provided hardware. Do not fully tighten yet.
- Бургулоо пункттарын белгилөө: Hold the light bar in the desired position and mark the drilling points for the brackets on your vehicle.
- Бургулоо тешиктери: Carefully drill pilot holes, then enlarge them to the appropriate size for the mounting hardware.
- Коопсуз жарык тилкеси: Attach the light bar with its brackets to the vehicle using the remaining mounting hardware. Adjust the angle of the light bar as needed for optimal beam direction, then fully tighten all bolts.
4.2 Wiring the Light Bar
The provided 16AWG wiring harness kit is designed for easy connection of two light fixtures (up to 180W total). This light bar is 300W, so ensure proper fuse rating and direct connection for optimal performance.
- Батареяны ажыратыңыз: Ишке кирүүдөн мурун унааңыздын аккумуляторунун терс терминалын электр зымдарынын трикотажын алдын алуу үчүн ажыратыңыз.
- Жарык тилкесин туташтырыңыз: Connect the positive and negative wires from the light bar to the corresponding connectors on the wiring harness. Ensure a secure and insulated connection.
- Маршруттук зымдардын шнуру: Carefully route the wiring harness from the light bar to the desired location for the rocker switch and then to the vehicle's battery, avoiding moving parts, sharp edges, and heat sources.
- Install Rocker Switch: Install the 5-pin rocker switch in a convenient and accessible location within the vehicle's cabin. Connect the switch wires to the harness as per the wiring diagram (typically included with the harness). The switch has built-in LEDs for visibility in the dark.
- Кубатка туташуу: Connect the positive wire of the wiring harness (with the inline blade fuse) to the positive terminal of the vehicle's battery. Connect the negative wire of the harness to the negative terminal of the battery or a suitable chassis ground point.
- Verify Fuses: Ensure the inline blade fuse is correctly installed in the fuse holder. This acts as the first line of defense against overcurrent and short circuits.
- Батареяны кайра туташтыруу: Once all connections are secure and verified, reconnect the negative terminal of the vehicle's battery.
5. Иштөө нускамалары
To operate the Nilight LED Light Bar:
- Ensure the vehicle's ignition is on (if wired to an accessory circuit) or the battery is connected (if wired directly).
- Locate the installed 5-pin rocker switch.
- Press the rocker switch to turn the LED light bar ON or OFF. The switch's built-in LEDs will illuminate when the light bar is active.
6. Техникалык тейлөө
- Тазалоо: Periodically clean the lens of the light bar with a soft cloth and mild soap and water to maintain optimal light output. Avoid abrasive cleaners.
- Текшерүү: Regularly check all mounting hardware and electrical connections for tightness and corrosion. Tighten any loose bolts and clean any corroded terminals.
- Зымдар: Inspect the wiring harness for any signs of wear, fraying, or damage. Replace damaged sections immediately.
7. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Жарык тилкеси күйбөйт. | Жарык тилкесине электр энергиясы жок. Күйгүзүүчү. Туташуу туура эмес зымдар. Бузулуу которгуч. | Батарея байланыштарын текшериңиз. Inspect and replace the inline fuse if blown. Бардык зым байланыштары коопсуз экендигин текшериңиз. Test the rocker switch for functionality. |
| Жарыктын чыгышы күңүрт же бүлбүлдөп турат. | Төмөн үнtage. Бошоң байланыш. Дат баскан терминалдар. | Check vehicle's battery voltage. Бардык электр байланыштарын бекемдеңиз. Clean battery terminals and wiring connections. |
| Линзанын ичиндеги нымдуулук. | Мөөрдүн бүтүндүгү бузулган. | Жардам алуу үчүн кардарларды колдоо бөлүмүнө кайрылыңыз. |
8. Техникалык шарттар
- Бренд: Nilight
- Модел: B09BLVTTZ2
- Күч: 300 Вт
- Узундугу: 12 дюйм
- Нур үлгүсү: Spot Flood Combo (Triple Row, Nest Reflector Cup)
- Тtage: 12 вольт DC
- Жарык булагы түрү: LED
- Электр өткөргүчтөрү: 16AWG, 2-Lead, 12 Feet Extendable
- Которуу: 5-Pin Rocker Switch with built-in LEDs
- Коргоо: Inline Blade Fuse for overcurrent and short circuit
- Монтаждоо: Жөнгө салынуучу кронштейн
- Fit түрү: Universal Fit
- Унаа тейлөө түрү: Truck, SUV, Car
9. Кепилдик маалыматы
This Nilight LED Light Bar comes with a 2 жылдык кепилдик from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications. Please retain your proof of purchase for warranty claims.
10. Кардарларды колдоо кызматы
For technical assistance, warranty claims, or any questions regarding your Nilight LED Light Bar, please refer to the contact information provided on the Nilight official website or your purchase platform. When contacting support, please have your product model number (B09BLVTTT2) and proof of purchase readily available.
