Продукт бүттүview
The MCO Home Smart Glass Touch Panel Switch MH-C421 is a sophisticated device designed for controlling roller shutters. It offers both local touch control and remote operation when integrated into a compatible smart home system.
Негизги өзгөчөлүктөрү:
- Control closure remotely
- Installs in place of an existing wall switch
- Supports automatic or manual calibration
- Works with single-phase asynchronous AC motors
- Local load control
Image: The MCO Home Smart Glass Touch Panel Switch, black with illuminated touch controls for up and down movement.
Эмне камтылган
The package for your MCO Home Smart Glass Touch Panel Switch MH-C421 contains the following items:
- 1 x MCO Home Smart Glass Touch Panel Switch (MH-C421 Black)
Орнотуу жана орнотуу
Маанилүү коопсуздук маалыматы:
- Орнотуу квалификациялуу электрик тарабынан гана жүргүзүлүшү керек.
- Орнотууну баштоодон мурун автоматтык өчүргүчтөн электр кубаты өчүрүлгөнүн текшериңиз.
- Бардык жергиликтүү электр эрежелерин жана эрежелерин сактаңыз.
Орнотуу кадамдары:
- Turn off power to the existing wall switch at the main circuit breaker. Verify power is off using a voltage сыноочу.
- Carefully remove the existing wall switch from the wall box.
- Identify the live, neutral, motor up, and motor down wires. Refer to the wiring diagram provided with your product for precise connections.
- Connect the wires to the corresponding terminals on the MCO Home MH-C421 switch.
- Которгучту дубалдын кутусуна бекитиңиз.
- Айнек сенсордук панелдин капкагын бекитиңиз.
- Автоматтык өчүргүчтөгү кубаттуулукту калыбына келтириңиз.
- Perform initial calibration as described in the Operating Instructions.
Сүрөт: Арткы view of the MCO Home Smart Glass Touch Panel Switch, illustrating the wiring terminals for electrical connection.
Иштөө нускамалары
Кол менен башкаруу:
The MCO Home MH-C421 features a glass touch panel for direct control of your roller shutters.
- To raise the roller shutter, gently touch the Жогору жебе icon on the panel.
- To lower the roller shutter, gently touch the Төмөн жебе icon on the panel.
- To stop the roller shutter at any position, touch either the Up or Down arrow icon again while the shutter is in motion.
Remote Control (via Z-Wave/Smart Home System):
This device can be integrated into a compatible Z-Wave smart home system for remote operation and advanced automation.
- Inclusion/Pairing: Refer to your Z-Wave gateway's manual for instructions on how to add a new device. Typically, you will put the gateway into inclusion mode, then activate the inclusion function on the MH-C421 (e.g., by pressing a specific button sequence or holding a touch area for several seconds).
- Алыстан иштөө: Once successfully paired, you can control the roller shutter remotely via your smart home app or connected voice assistant.
- Калибрлөө: The switch supports automatic or manual calibration. For automatic calibration, ensure the roller shutter can move freely to its full open and closed positions during the initial setup or after a power cycle. Manual calibration steps may be available through your Z-Wave controller interface.
Сүрөт: Жакын план view of the MCO Home Smart Glass Touch Panel, highlighting the illuminated touch controls for raising and lowering roller shutters.
Техникалык тейлөө
The MCO Home Smart Glass Touch Panel Switch is designed for low maintenance. Follow these guidelines to ensure longevity:
- Тазалоо: жумшак колдонуу, damp cloth to clean the glass surface. Avoid abrasive cleaners, solvents, or harsh chemicals that could damage the finish.
- Кубат циклдери: If the device becomes unresponsive, try cycling the power at the circuit breaker for a few seconds.
- Программалык камсыздоонун жаңыртуулары: Check with MCO Home or your Z-Wave gateway manufacturer for any available firmware updates that may improve performance or add features.
Проблемаларды чечүү
If you encounter issues with your MCO Home Smart Glass Touch Panel Switch, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Которуу жооп бербей жатат. | No power; incorrect wiring; device not properly included in Z-Wave network. | Check circuit breaker. Verify wiring connections. Re-attempt Z-Wave inclusion. |
| Roller shutter does not move or moves erratically. | Motor wiring issue; calibration required; motor overload. | Ensure motor wires are correctly connected. Perform automatic or manual calibration. Check motor specifications for compatibility. |
| Cannot control remotely. | Not paired with Z-Wave gateway; out of range; network interference. | Ensure the switch is successfully included in your Z-Wave network. Move gateway closer or add Z-Wave repeaters. Check for other wireless devices causing interference. |
Техникалык мүнөздөмөлөр
| Спецификация | Деталь |
|---|---|
| Продукциянын өлчөмдөрү | 8.6 x 8.6 x 4.3 см; 260 грамм |
| Бөлүмдүн номери | MH-C421 Black |
| Материалдын түрү | Айнек |
| Өндүрүүчү | MCO Home |
| Модель номери | MH-C421 Black |
| ASIN | B09BNPBVNQ |
| First Available Date on Amazon.de | 2. август 2021 |
| Иштөө режими | КҮЙГҮЗҮҮ ӨЧҮРҮҮ |
| Байланыш түрү | Working Contact |
| Бренд | MCO Home |
| Терминал түрү | Through Hole |
| Элементтин өлчөмдөрү L x W x H | 8.6 x 8.6 x 4.3 см |
| Circuit Type | 1-жол |
| Актуатор түрү | тийүү |
| Байланыш материалы | Жез, жез |
| Эл аралык коргоо (IP) рейтинги | IP00 |
| Башкаруу ыкмасы | Алыстан башкаруу |
Кепилдик жана колдоо
MCO Home products are designed for reliability and performance. For specific warranty details, please refer to the documentation provided with your purchase or visit the official MCO Home webсайт.
Кардарларды колдоо:
If you require technical assistance or have questions regarding your MH-C421 Smart Glass Touch Panel Switch, please contact MCO Home customer support. Contact information can typically be found on the manufacturer's webсайтында же продуктунун таңгагында.
Экологиялык маалымат:
For recycling information regarding lamps and disposal of broken or damaged lamps, please refer to the relevant local regulations and recycling guidelines.
Image: A hand holding a globe with a plant, representing environmental responsibility and sustainability.
