Automatic Switch in Moulded Box: LTC Low Terminal Covers XT7 / XT7 M F 4P User Manual

Introduction

This manual provides essential information for the safe and effective use of the ABB LTC Low Terminal Covers XT7 / XT7 M F 4P. These covers are designed for use with automatic switches in moulded boxes, specifically for fixed four-pole configurations. Please read this manual thoroughly before installation and operation.

Коопсуздук маалыматы

ЭСКЕРТҮҮ: Electrical installation and maintenance should only be performed by qualified personnel. Failure to follow these instructions can result in serious injury or death.

• Түзмөктү орнотуудан же тейлөөдөн мурун ар дайым электр кубатынан ажыратыңыз.
• Ensure all connections are secure and comply with local electrical codes.
• Эгерде продукт бузулган болсо, аны колдонбоңуз.
• Балдар жетпеген жерде сактаңыз.

Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

• 2 x LTC Low Terminal Covers XT7 / XT7 M F 4P
• Көрсөтмө (бул документ)

Image: Two ABB LTC Low Terminal Covers. The top cover is shown from a slightly elevated angle, revealing its flat top surface with embossed patterns and ribbed side. The bottom cover is inverted, showing the internal structure designed to house electrical terminals, also with ribbed sides. Both covers are dark grey.

Орнотуу жана орнотуу

These terminal covers are designed for specific ABB automatic switches in moulded boxes (XT7 / XT7 M F 4P series). Follow the instructions provided with your main automatic switch for proper installation.

1. Коммутаторду даярдаңыз: Ensure the automatic switch is properly mounted and all power is disconnected.
2. Терминалдарды аныктоо: Locate the low terminals on your XT7 / XT7 M F 4P automatic switch that require covering.
3. Капкакты жайгаштырыңыз: Align the LTC low terminal cover with the corresponding terminals. The cover is designed to fit snugly over the terminal connections.
4. Капкакты бекитиңиз: Gently press the cover into place until it clicks or is firmly seated. Ensure there are no gaps and the cover is securely attached.
5. Repeat for all Terminals: Use the second cover for the remaining set of terminals if applicable.
6. Орнотууну текшерүү: Double-check that both covers are correctly installed and provide adequate protection for the terminals.

Иштөө нускамалары

The LTC Low Terminal Covers are passive components designed to provide protection for electrical terminals. They do not have active operational functions. Once installed, their purpose is to insulate and protect the low terminals of the automatic switch from accidental contact and environmental factors.

• Ensure covers remain securely in place during operation of the automatic switch.
• Do not attempt to remove covers while the switch is energized.

Техникалык тейлөө

These terminal covers require minimal maintenance. Regular inspection is recommended to ensure their integrity and proper function.

• Тазалоо: If necessary, clean the covers with a dry, lint-free cloth. Do not use abrasive cleaners or solvents.
• Текшерүү: Periodically check for any signs of damage, cracks, or discoloration. Ensure they remain securely attached to the automatic switch.
• Алмаштыруу: If a cover is damaged or no longer fits securely, replace it immediately with an authentic ABB replacement part (Model: 1SDA107476R1).

Проблемаларды чечүү

As passive protective components, troubleshooting for these terminal covers is limited. Most issues relate to improper installation or physical damage.

Техникалык шарттар

Кепилдик жана колдоо

For warranty information and technical support regarding your ABB LTC Low Terminal Covers, please refer to the documentation provided with your main ABB automatic switch or visit the official ABB website. Ensure you have your product reference number (1SDA107476R1) ready when contacting support.

ABB расмий өкүлү Webсайт: www.abb.com