1. Introduction and Overview
The XTOOL TP150 is a comprehensive Tire Pressure Monitoring System (TPMS) service tool designed for efficient monitoring and repair of TPMS systems. This device allows users to check tire pressure, temperature, and battery life, read sensor IDs, read and clear Diagnostic Trouble Codes (DTCs), reset TPMS warning lights, and perform activation, programming, and relearn functions for TPMS sensors. It is specifically designed to program XTOOL TS100 sensors (315/433MHz) and is compatible with a wide array of domestic and foreign vehicle makes and models.
2. Орнотуу жана алгачкы колдонуу
Before using your XTOOL TP150, ensure it is adequately charged. The device comes with a unit charger and various adapters (US, UK, EU) for convenience. Connect the appropriate adapter to the charger and plug it into the device. The TP150 features a user-friendly interface with straightforward navigation via physical buttons, as it does not have a touch screen.
Figure 2.1: XTOOL TP150 main screen displaying tire pressure information.
Figure 2.2: Power adapters and cables included with the XTOOL TP150 for charging and connectivity.
Видео 2.1: Бүттүview of the XTOOL TP150 TPMS programming tool, demonstrating its interface and basic functions. This video highlights the device's capabilities for programming TS100 sensors.
Video 2.2: A demonstration of the XTOOL TP150 TPMS Tool, showcasing its features and how it can assist in TPMS maintenance. This video emphasizes the cost-saving benefits of using the tool.
3. Operating the TP150
3.1. Activating/Triggering Sensors
The TP150 can activate all OEM and universal TPMS sensors. This function is crucial for initiating the relearn process and monitoring the current status of sensors, ensuring they are properly connected and functioning. To activate, select the "TPMS" option on the main menu, then choose your vehicle model, and select "trigger sensor".
Figure 3.1: Activating a TPMS sensor by holding the TP150 near the tire valve and pressing the activation button.
3.2. Programming XTOOL TS100 Sensors
The TP150's programming function is exclusively for XTOOL TS100 sensors. These dual-frequency sensors (315/433MHz) cover 99% of vehicle makes and models. There are four programming modes:
- Automatically ID Generation: The device generates a new sensor ID.
- Entry ID Manually: Users can input a sensor ID manually.
- Copy ID via Activation: Copies the ID from an activated sensor.
- Copy ID via OBD: Copies the ID from the vehicle's OBD system.
To program, navigate to "TPMS" > "Select Vehicle" > "programming sensors". Ensure the TS100 sensor is within 25 cm of the device.
Figure 3.2: The four programming methods available on the XTOOL TP150 for TS100 sensors.
3.3. TPMS Relearn Procedures
The TP150 supports various relearn modes for both OEM and universal sensors after tire replacement or rotation. Some vehicles may automatically relearn after driving for 20 minutes. Refer to your vehicle's maintenance manual for specific requirements.
- Автоматтык түрдө кайра үйрөнүү: Drive the vehicle at ≥ 25 km/h (15 mph) for 20 minutes with all tires at standard pressure.
- OBD кайра үйрөнүү: Connect the tool to the OBD port and select "OBD relearn" to write sensor IDs into the system.
- Стационардык кайра үйрөнүү: Follow on-screen instructions for a stationary relearn process.
- Copy Sensors: Эгер сенсор идентификаторлору өзгөрүлбөсө, алардын оригиналдарга дал келишин текшериңиз. Керек болсо ID'лерди көчүрүү үчүн XTOOL TS100 сенсорлорунун "Программалоо" менюсун колдонуңуз.
Figure 3.3: Various TPMS relearn procedures supported by the XTOOL TP150.
3.4. TPMS Diagnosis and DTC Clearing
The TP150 can quickly diagnose TPMS-related problems, check pressure, temperature, and battery health, and identify faulty sensors. It can also read and clear DTCs (Diagnostic Trouble Codes) and reset the TPMS warning light.
To perform a diagnosis, go to "TPMS" > "Tire Pressure Diagnosis" > "Read & Clear Codes".
Figure 3.4: TPMS diagnosis interface on the XTOOL TP150, showing options to read/clear codes and turn off warning lights.
4. Техникалык тейлөө
Keep your TP150 up-to-date with a single click for optimal performance. The device supports free lifetime software updates via Wi-Fi. To update, navigate to "Options" > "Wi-Fi connection" and sign in, then select "Upgrade" > "Wi-Fi Upgrade". Ensure the device is charging during the update process.
5. Кыйынчылыктарды
If you encounter any issues with activation, programming, or relearn procedures, ensure the device is fully charged and connected properly. For specific error codes or persistent issues, it is recommended to contact XTOOL technical support.
6. Техникалык шарттар
- Өндүрүүчү: XTOOL
- Модел: XTOOL TP150
- Элемент Салмагы: 2.23 фунт
- Пакеттин өлчөмдөрү: 11.46 x 7.6 x 3.74 дюйм
- Батареялар: 1 Литий Полимер батарейкасы талап кылынат
- Операция системасы: Linux
- UPC: 789605297168
- Биринчи жеткиликтүү: 5-август, 2021-жыл
7. Кепилдик жана колдоо
The XTOOL TP150 comes with a 2-year warranty. For technical assistance, training, remote support, or any value-added services, please contact XTOOL Official support. You can reach them via email at xtooldirect@outlook.com. XTOOL has a professional technical team dedicated to providing comprehensive customer support.
