Introduction
Thank you for choosing the FLINQ Motion Lights. This 4-pack of LED motion sensor lights is designed to provide convenient and efficient lighting for various indoor spaces such as cabinets, wardrobes, bookshelves, and drawers. With their rechargeable battery and versatile installation options, these lights offer a practical solution for illuminating dark areas.
Please read this manual carefully before using the product to ensure proper operation and longevity.
Продукт бүттүview
The FLINQ Motion Lights provide bright, warm white illumination, perfect for enhancing visibility inside closets and other dark spaces. This image shows the lights discreetly installed within a wardrobe, highlighting their practical application.
This image displays the complete contents of the FLINQ Motion Lights 4-pack, including the four motion sensor lights, four USB charging cables, and adhesive mounting options. Everything needed for setup is provided.
Орнотуу жана орнотуу
Жарыктарды заряддоо
Before first use, ensure the lights are fully charged. Each light is equipped with a rechargeable battery.
- Locate the micro-USB charging port on the side of the light.
- Connect the provided USB charging cable to the light and a compatible USB power source (e.g., computer USB port, USB wall adapter).
- The indicator light will show charging status (e.g., red for charging, green/off for fully charged).
- Толук заряддоо, адатта, бир нече саатка созулат.
Деталдаштырылган view of the back of a FLINQ Motion Light, highlighting the micro-USB charging port and the ON/OFF/AUTO switch for mode selection.
Монтаждоо параметрлери
The FLINQ Motion Lights offer three versatile installation methods:
- Скотч:
Peel off the protective film from the 3M adhesive tape located on the back of the light. Press the light firmly onto a clean, dry, and smooth surface where you wish to install it. This method is ideal for permanent placement.
- Магниттик пластина:
Attach the provided magnetic plate to the desired surface using its adhesive backing. The light can then be magnetically attached to this plate, allowing for easy removal for charging or repositioning.
The back of the FLINQ Motion Light, illustrating the integrated magnetic plate for easy attachment to metallic surfaces or the included adhesive magnetic disc.
- Илгичтер:
The lights can also be hung using small hooks if your installation area allows for it. This provides a flexible mounting solution.
Choose the method that best suits your needs and the surface where the light will be placed. Ensure the surface is clean and dry for optimal adhesion.
Иштөө нускамалары
Режим тандоо
Each FLINQ Motion Light has a switch on the back to select its operating mode:
- КҮЙҮК: The light will stay continuously on, regardless of motion or ambient light.
- ӨЧҮК: Жарык өчүк бойдон калат.
- AUTO (Motion Sensor Mode): This is the primary mode for motion detection.
Motion Sensor Functionality (AUTO Mode)
In AUTO mode, the light will activate based on motion and ambient light conditions:
- The light is equipped with a sensitive motion sensor that detects movement within a range of 3-5 meters.
- It also features a day/night sensor, meaning it will only activate in dark conditions when motion is detected.
- Once motion is detected, the light will turn on automatically.
- If no further motion is detected for approximately 25 seconds, the light will automatically turn off to conserve battery life.
The FLINQ Motion Light providing illumination inside a closet, demonstrating its motion-activated functionality in a practical setting.
A FLINQ Motion Light mounted on a wall, serving as a subtle night light or accent light in a bedroom environment.
Техникалык тейлөө
Тазалоо
To maintain the appearance and functionality of your FLINQ Motion Lights, follow these cleaning guidelines:
- Ensure the light is turned OFF before cleaning.
- Бетти жумшак, кургак же бир аз сүртүңүз damp кездеме.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the plastic material or electronic components.
- Avoid getting water directly into the charging port or sensor area.
Батареяга кам көрүү
Камтылган кайра заряддалуучу батареянын иштөө мөөнөтүн көбөйтүү үчүн:
- Recharge the lights when the brightness noticeably diminishes.
- Батареяны бат-баттан толук түгөтүп коюудан алыс болуңуз.
- If storing the lights for an extended period, charge them to about 50% and recharge every few months to prevent deep discharge.
- Do not expose the lights to extreme temperatures (hot or cold) as this can affect battery performance.
Проблемаларды чечүү
If you encounter issues with your FLINQ Motion Lights, please refer to the following common solutions:
| Көйгөй | Мүмкүн болгон себеп / Чечим |
|---|---|
| Жарык күйбөйт. |
|
| Жарык кыймылды сезбейт. |
|
| Light turns off too quickly or stays on too long. |
|
| Жарык күңүрт. |
|
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | FLINQ |
| Модель аты | Motion Lights 4-pack |
| Өлчөмдөрү (L x W x Y) | 8 x 8 x 2.8 см |
| Бирдигине салмак | 100 г |
| Элементтердин саны | 4 |
| Материал | Пластик |
| Ачык түс | Жылуу ак |
| Lumen Output | 50 Lumens |
| Өзгөчөлүктөр | Wireless, Motion Sensor, Rechargeable |
| Power Source | Battery Powered (Built-in Li-Polymer) |
| Батарея сыйымдуулугу | 3.7V 600mAh |
| Лампанын түрү | LED (5 HQ SMD LED) |
| Кыймылды аныктоо диапазону | 3-5 метр |
| Авто өчүрүү убактысы | 25 секунд (кыймылсыз болгондон кийин) |
| Өмүр | Болжол менен 30,000 саат |
| Сертификация | CE |
Кепилдик жана колдоо
Кепилдик маалымат
Specific warranty details for your FLINQ Motion Lights may vary by region and retailer. Please refer to your purchase receipt or contact your point of sale for precise warranty terms and conditions.
Кардарларды колдоо
For further assistance, technical support, or inquiries regarding your FLINQ product, please contact FLINQ customer service:
- Электрондук почта: info@flinqproducts.nl
- Webсайт: For more information and product updates, visit the official FLINQ webсайт.
- You can also scan the QR code on the product packaging for additional information: https://qrco.de/bc0PUg
