JBL PROFLORA CO2 ADVACED SET M Aquarium CO2 жер семирткич системасынын колдонуу боюнча колдонмосу

1. Киришүү

The JBL PROFLORA CO2 ADVANCED SET M is a complete CO2 fertilization system designed for freshwater aquariums ranging from 40 to 600 liters. This system provides essential carbon dioxide to aquatic plants, promoting healthy and robust growth. It features a reusable CO2 cylinder, a pressure regulator with two gauges, a night shut-off solenoid valve, a bubble counter with a non-return valve, a CO2 reactor, and a permanent CO2/pH test for continuous monitoring.

2. Коопсуздук маалыматы

Please read and understand all safety instructions before operating the JBL PROFLORA CO2 ADVANCED SET M. Failure to follow these instructions may result in injury or damage to the product.

• Pressurized Cylinder: The CO2 cylinder contains gas under high pressure. Handle with care. Do not expose to direct sunlight or temperatures above 50°C (122°F). Keep out of reach of children.
• Вентиляция: Ensure adequate ventilation in the area where the CO2 system is installed. While CO2 is not toxic in small amounts, high concentrations can displace oxygen.
• Байланыштары: Always ensure all connections are tight and secure to prevent CO2 leaks. Use appropriate tools for tightening, but do not overtighten.
• Non-Return Valve: The included non-return valve is crucial to prevent aquarium water from entering the CO2 cylinder and regulator, which could cause damage. Ensure it is installed correctly.
• Электр компоненттери: The solenoid valve is an electrical component. Keep it dry and away from water. Disconnect power before performing any maintenance.
• TÜV Tested: The CO2 cylinder is TÜV tested for safety. Do not modify or tamper with the cylinder or its valve.

3. Пакеттин мазмуну

Пакетте бардык компоненттер бар экенин текшериңиз:

• 1x JBL PROFLORA CO2 ADVANCED SET M (complete CO2 fertilizer system)
• 1x Reusable CO2 cylinder (500g)
• 1x Stand for CO2 cylinder
• 1x Pressure regulator with two gauges
• 1x Solenoid valve (for night shut-off)
• 1x CO2 hose
• 1x Bubble counter with integrated non-return valve
• 1x CO2 reactor
• 1x Permanent CO2/pH test
• Aquarium plant fertilizer

Image 1: JBL PROFLORA CO2 ADVANCED SET M product packaging, showing the main components included in the set.

4. Орнотуу нускамалары

Follow these steps to set up your JBL PROFLORA CO2 ADVANCED SET M:

1. CO2 цилиндрин даярдоо: Place the 500g reusable CO2 cylinder into its designated stand to ensure stability.
2. Attach the Pressure Regulator: Carefully screw the pressure regulator onto the CO2 cylinder valve. Ensure a tight, leak-free connection. The two gauges will display the cylinder pressure and the working pressure.
3. Connect the Solenoid Valve: Attach the solenoid valve to the pressure regulator's outlet. This valve controls the CO2 flow and enables the night shut-off function.
4. Install the Bubble Counter: Connect one end of the CO2 hose to the outlet of the solenoid valve. Connect the other end of the hose to the inlet of the bubble counter. Ensure the non-return valve within the bubble counter is oriented correctly to prevent water backflow. Fill the bubble counter partially with water.
5. Position the CO2 Reactor: Place the CO2 reactor inside your aquarium. Secure it using the provided suction cups or clips. Connect the outlet of the bubble counter to the inlet of the CO2 reactor using the CO2 hose.
6. Install the Permanent CO2/pH Test: Place the permanent CO2/pH test indicator inside the aquarium, typically on the opposite side of the CO2 reactor, to monitor CO2 levels and pH continuously.
7. Кубат туташуу: Plug the solenoid valve's power adapter into an electrical outlet. The solenoid valve can be connected to a timer (not included) to activate the night shut-off feature.
8. Initial CO2 Adjustment: Slowly open the main valve on the CO2 cylinder. Then, use the fine-adjustment knob on the pressure regulator to set the desired bubble rate in the bubble counter. Start with a low rate (e.g., 10 bubbles per minute for a 100L tank) and adjust gradually based on the permanent CO2/pH test results and plant response.

Image 2: Diagram illustrating the setup of the JBL PROFLORA CO2 ADVANCED SET M, showing the CO2 cylinder, regulator, solenoid valve, bubble counter, and reactor connected to an aquarium.

5. Иштөө нускамалары

Система орнотулгандан кийин, оптималдуу иштеши үчүн бул көрсөтмөлөрдү аткарыңыз:

• CO2 деңгээлинин мониторинги: Regularly check the permanent CO2/pH test indicator. The color change indicates the CO2 concentration in your aquarium water. Aim for optimal CO2 levels (typically 20-30 mg/L) for healthy plant growth without harming fish.
• Adjusting Bubble Rate: If the CO2/pH test indicates levels are too low, slightly increase the bubble rate using the fine-adjustment knob on the regulator. If levels are too high, decrease the bubble rate. Make small adjustments and allow time for the CO2 to dissolve and the indicator to react (several hours).
• Night Shut-off: Connect the solenoid valve to a timer. Set the timer to turn off the CO2 supply during the night (when aquarium lights are off). Plants do not photosynthesize and consume CO2 in the dark; continuing CO2 supply at night can lead to dangerously high CO2 levels and low pH, which can be harmful to fish.
• Манометрлер: The left gauge on the regulator shows the remaining pressure in the CO2 cylinder. The right gauge shows the working pressure. When the left gauge approaches zero, it's time to consider refilling or replacing the CO2 cylinder.

6. Техникалык тейлөө

Regular maintenance ensures the longevity and efficient operation of your CO2 system:

• CO2 Cylinder Refill/Replacement: When the cylinder pressure gauge indicates low pressure, the cylinder needs to be refilled or replaced. Consult your local aquarium store or CO2 supplier for refilling services.
• Bubble Counter Water: Periodically check the water level in the bubble counter and refill with fresh aquarium water if it evaporates.
• CO2 Reactor Cleaning: Over time, algae or debris may accumulate in the CO2 reactor, reducing its efficiency. Disconnect the reactor and clean it thoroughly with an aquarium-safe brush or solution.
• Шланг текшерүү: Inspect the CO2 hose regularly for kinks, cracks, or signs of wear. Replace the hose if any damage is observed to prevent leaks.
• Permanent CO2/pH Test Reagent: The reagent in the permanent CO2/pH test needs to be replaced periodically (e.g., every 4-6 weeks) to ensure accurate readings.

7. Кыйынчылыктарды

Жалпы маселелер жана аларды чечүү үчүн төмөнкү таблицаны караңыз:

8. Техникалык шарттар

9. Кепилдик жана колдоо

JBL products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the official JBL website or contact your local JBL dealer. Keep your purchase receipt as proof of purchase.

You can visit the official JBL store for more information: JBL дүкөнү