MAIMEIMI GPS Speedometer 85mm (3-3/8") Instruction Manual

1. Киришүү

This manual provides detailed instructions for the installation, operation, and maintenance of your MAIMEIMI 85mm GPS Speedometer. Designed for a wide range of applications including cars, tractors, trucks, boats, and marine vessels, this speedometer features a clear TFT screen, IP67 waterproof rating, and a wide 9-32VDC working voltage range. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Пакеттин мазмуну

Пакетти ачканда, төмөнкү нерселердин бардыгы камтылганын текшериңиз:

• 1 x GPS Speedometer (85mm / 3-3/8")
• 1 x GPS Antenna (3-meter cable length)
• 1 x Instruction Manual

Image: Contents of the MAIMEIMI GPS Speedometer package.

3. Продукциянын өзгөчөлүктөрү

• TFT Screen Display: Provides clear visibility of speed, odometer, trip meter, battery voltage, and course over ground (COG).
• Wide Voltage диапазону: Operates on 9-32VDC, suitable for various vehicle types.
• Waterproof & Anti-fogging: IP67 rated for water and fog resistance, ensuring reliable performance in challenging environments.
• Multiple Unit Switching: Easily switch between kilometers per hour (km/h), miles per hour (mph), and knots (rounded to one decimal).
• GPS Signal Acquisition: Initial signal acquisition takes approximately 30 seconds, with faster connections under clear skies.
• Odometer & Trip Meter: Odometer (0-999999km) is adjustable via the back button. Trip meter (0-999.9km) resets when power is off.
• Orientation Pointer: Displays Course Over Ground (COG) for directional awareness.

Image: Detailed display information of the GPS Speedometer.

Image: The speedometer undergoing a waterproof test.

4. Орнотуу жана орнотуу

Follow these steps for proper installation of your GPS Speedometer:

1. Монтаждоо тешигин даярдаңыз: Open an 85mm (3 3/8") diameter hole in your panel. Ensure there is a 55mm (2 3/16") depth clearance behind the panel for the gauge body.
2. Insert the Gauge: Carefully place the speedometer into the prepared hole.
3. Өлчөгүчтү бекитиңиз: Use the provided mounting ring to screw down and secure the gauge firmly in place.
4. Зымдарды туташтыруу:
   • Connect the Black wire to Ground (-).
   • Connect the Red wire to 9-30VDC power supply.
5. GPS антеннасын туташтыруу: Plug the GPS antenna into the designated port on the back of the speedometer. The GPS antenna can be optionally mounted using 3M double-sided tape.

Image: Front and back dimensions of the GPS Speedometer.

Image: Basic wiring diagram for the speedometer.

Image: Step-by-step installation guide for the gauge.

5. Иштөө нускамалары

Once installed and powered, the speedometer will begin searching for a GPS signal. After acquiring a signal, it will display speed and other data.

• Бирдикти алмаштыруу: To change the speed unit (km/h, mph, or knots), press the button located on the back of the speedometer. The unit will cycle through the options and save automatically.
• Odometer Adjustment: The odometer value can be adjusted using the button on the back.
• Саякат өлчөгүч: The trip meter automatically resets to zero when the power is turned off.

Image: Display showing selectable speed units.

6. Техникалык тейлөө

To ensure the longevity and optimal performance of your GPS Speedometer, follow these general maintenance guidelines:

• Regularly clean the screen and bezel with a soft, damp кездеме. Абразивдүү тазалагычтардан алыс болуңуз.
• Бардык зымдардын туташууларынын бекем жана дат баспагандыгын текшериңиз.
• Periodically check the GPS antenna for any damage or obstruction to maintain signal integrity.
• While the unit is IP67 waterproof, avoid prolonged submersion or high-pressure water jets.

7. Кыйынчылыктарды

If you encounter any issues with your GPS Speedometer, consider the following common solutions:

• GPS сигналы жок: GPS антеннасынын тунук экенин текшериңиз view of the sky. Obstructions can block the signal. Allow up to 30 seconds for initial signal acquisition.
• Incorrect Speed Reading: Verify that the correct unit (km/h, mph, knots) is selected. If the issue persists, ensure the GPS antenna is securely connected.
• Дисплей иштебейт: Check all power connections to ensure they are secure and receiving the correct voltage (9-32VDC).
• Баскычтар жооп бербейт: Ensure the unit is clean and free from debris around the buttons.

Эгерде бул кадамдарды жасагандан кийин көйгөйлөр чечилбесе, кошумча жардам алуу үчүн кардарларды колдоо кызматына кайрылыңыз.

8. Техникалык шарттар

9. Кепилдик жана колдоо

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official MAIMEIMI webсайт. Ар кандай кепилдик дооматтары үчүн сатып алганыңыздын далилин сактаңыз.