1. Киришүү
This manual provides essential information for the safe and efficient operation of your Innosilicon T3+ BTC SHA-256 ASIC Miner 57TH. Please read this manual thoroughly before setting up and operating the device to ensure optimal performance and longevity.
An image showing the Innosilicon T3+ ASIC Miner, a rectangular white unit with cooling fans visible on one side and power connections on the other.
2. Коопсуздук маалыматы
Жарааттарды же аппаратты бузууну болтурбоо үчүн төмөнкү коопсуздук чараларын сактаңыз:
- Бардык электр байланыштары үчүн туура жерге туташтырууну камсыз кылыңыз.
- Do not operate the miner in environments with high humidity or extreme temperatures outside the specified range (0-40°C).
- Maintain adequate ventilation around the device to prevent overheating.
- Аба кирүүчү же чыгуучу жерлерди жаап албаңыз.
- Кандайдыр бир тейлөө же тазалоо иштерин жүргүзүүдөн мурун электр энергиясын өчүрүңүз.
- Only use the provided power supply unit (PSU) or a compatible, certified replacement.
- Балдар жетпеген жерде сактаңыз.
3. Пакеттин мазмуну
Пакетте бардык компоненттер бар экенин текшериңиз:
- Innosilicon T3+ BTC SHA-256 ASIC Miner 57TH
- Integrated Power Supply Unit (PSU)
- Электр кабели (аймакка жараша)
- Ethernet Cable (optional, may not be included)
4. Орнотуу
4.1 Айлана-чөйрөнү коргоо
The T3+ miner requires a stable and controlled environment for optimal performance and longevity. Ensure the operating temperature is between 0-40°C and the humidity is low. A dedicated mining farm with proper cooling and a dust filter environment is highly recommended to prevent dust accumulation and maintain efficient operation.
4.2 Физикалык жайгаштыруу
Place the miner on a stable, flat surface. Ensure there is sufficient space around the device for proper airflow, especially around the cooling fans. Do not place the miner near heat sources or in enclosed spaces.
4.3 Электрдик туташуу
- Connect the power cable to the integrated PSU on the miner.
- Plug the other end of the power cable into a grounded electrical outlet. The miner operates at approximately 3300W (+/- 10%) and requires a stable power source with a maximum input voltage of 240 Volts. Ensure your electrical infrastructure can support this load.
4.4 Тармактык туташуу
- Connect one end of an Ethernet cable to the Ethernet port on the miner.
- Ethernet кабелинин экинчи учун тармак роутериңизге же коммутаторуңузга туташтырыңыз.
- Ensure your network provides a stable internet connection for mining operations.
5. Иштөө нускамалары
5.1 Баштапкы күйгүзүү
Once all connections are secure, power on the miner. The fans will start, and the device will begin its boot sequence. This may take a few minutes.
5.2 Конфигурация
The Innosilicon T3+ typically uses a web-based interface for configuration. To access it:
- Determine the IP address of your miner. This can often be found through your router's connected devices list or by using an IP scanner tool on your network.
- ачуу а web browser on a computer connected to the same network and enter the miner's IP address in the address bar.
- Log in using the default credentials (refer to the manufacturer's documentation or common default credentials for Innosilicon devices).
- Configure your mining pool settings (URL, Worker, Password) within the web interface. The T3+ is designed for SHA-256 algorithm mining.
- Жөндөөлөрдү сактап, суралса, кенчи өчүрүп-күйгүзүңүз.
5.3 Аткарууну көзөмөлдөө
Regularly monitor the miner's performance through its web interface. Key metrics to observe include:
- Хэшрат: Aim for the specified 57TH/s (+/-6%). Fluctuations may indicate issues.
- Температура: Ensure the operating temperature remains within safe limits to prevent damage to the ASIC chips.
- желдеткич ылдамдыгы: Verify fans are operating correctly and at appropriate speeds.
- Иштөө убактысы: Monitor continuous operation.
6. Техникалык тейлөө
Regular maintenance ensures the longevity and efficiency of your T3+ miner:
- Чаңды тазалоо: Periodically clean the miner, especially the fans and heatsinks, to prevent dust buildup. Dust can impede airflow and lead to overheating. Use compressed air or a soft brush. Ensure the device is powered off and unplugged before cleaning.
- Экологиялык текшерүү: Continuously monitor the ambient temperature and humidity of the operating environment. Adjust cooling solutions as needed to maintain optimal conditions.
- Кабелдик текшерүү: Бардык электр жана тармак кабелдерин эскирүүнүн же бузулуунун белгилерин үзгүлтүксүз текшерип туруңуз. Бузулган кабелдерди дароо алмаштырыңыз.
7. Кыйынчылыктарды
Бул бөлүм сиз кабылышы мүмкүн болгон жалпы көйгөйлөрдү карайт:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Miner does not power on | No power, faulty cable, PSU issue | Check power cable connection, test outlet, ensure PSU is connected correctly. |
| Low Hashrate / No Hashrate | Incorrect pool settings, network issue, overheating, faulty hashboard | Verify pool settings, check network connection, ensure proper cooling, restart miner. If issue persists, contact support. |
| Ашыкча ысып кетүү | Insufficient ventilation, dust buildup, fan failure | Improve airflow, clean dust from fans/heatsinks, check fan operation. |
| Кирүү мүмкүн эмес web интерфейс | Incorrect IP address, network connectivity issue, miner not booted | Verify IP address, check Ethernet cable, ensure miner is fully booted. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact Innosilicon customer support.
8. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель аты | T3+ |
| Алгоритм | SHA-256 |
| Хешрейт | 57 TH/s (±6%) |
| Энергияны керектөө | 3300W (±10%, normal mode, PSU efficiency: 93%, temperature 25°C) |
| Чыгуу Wattage | 3300 Ватт |
| Максималдуу киргизүү көлөмүtage | 240 вольт |
| Өлчөмдөрү (L×W×H) | 338мм x 207мм x 293мм |
| Элемент Салмагы | 12.3 KG (approx. 30 pounds) |
| Муздатуу ыкмасы | Аба муздатуу |
| Иштөө температурасы | 0-40°C |
| Шайкеш түзмөктөр | Personal Computer (for configuration/monitoring) |
9. Кепилдик маалыматы
For detailed warranty terms and conditions, please refer to the official Innosilicon website or the warranty card included with your purchase. Typically, warranty coverage addresses manufacturing defects. Any unauthorized modifications, improper installation, or operation outside of specified environmental conditions may void the warranty.
10. Кардарларды колдоо кызматы
If you require technical assistance, have questions about your miner, or need to report an issue, please contact Innosilicon customer support through their official channels. Have your product model (T3+) and serial number ready when contacting support for faster service.
You can typically find support contact information on the official Innosilicon webсайт: www.innosilicon.com
