REBEL RB-0003 3-in-1 Detector User Manual
Модели: RB-0003
1. Киришүү
Thank you for choosing the REBEL RB-0003 3-in-1 Detector. This device is designed to assist you in safely locating metal, wood, and live AC cables hidden within walls, ceilings, and floors. Please read this manual thoroughly before operating the device to ensure safe and effective use.
The RB-0003 is an essential tool for DIY enthusiasts and professionals, providing accurate detection to prevent damage during drilling, cutting, or renovation projects.
2. Коопсуздук маалыматы
- Always exercise caution when working near detected objects.
- Do not rely solely on the detector for safety. Always verify findings with other methods if possible, especially when dealing with electrical wires.
- Түзмөктү кургак жана таза кармаңыз. Аны нымдуулукка же өтө жогорку температурага дуушар кылбаңыз.
- Түзмөктү ачууга же өзгөртүүгө аракет кылбаңыз. Оңдоо иштерин квалификациялуу адистер гана жүргүзүшү керек.
- Аппарат узак убакыт бою колдонулбай турган болсо, батарейкаларды алып салыңыз.
3. Продукт бүтүп калдыview
Familiarize yourself with the components of your REBEL RB-0003 detector:
Сүрөт 1: Алдыңкы view of the REBEL RB-0003 Detector in packaging. The device features a large display and a 'SELECT' button for mode switching.
2-сүрөт: Арткы view of the REBEL RB-0003 Detector. This view shows the battery compartment and the product information label.
- Дисплей экраны: Shows detection mode, signal strength, and low battery indicator. (Display size: 51 x 25 mm)
- ТАНДОО баскычы: Used to switch between detection modes (Metal, Wood, AC Cable).
- Сенсор аянты: Located on the back of the device, this area must be flush against the surface for accurate readings.
- Батарея бөлүмү: Батареяны орнотуу үчүн арткы жагында жайгашкан.
4. Орнотуу
4.1. Батареяны орнотуу
- Open the battery compartment cover on the back of the device (refer to Figure 2).
- Insert the required batteries, ensuring correct polarity (+/-). The device requires batteries for operation.
- Батарея уясынын капкагын бекем жабыңыз.
The device features a low battery indicator on the display. Replace batteries promptly when this indicator appears to ensure accurate readings.
5. Иштөө нускамалары
5.1. Жалпы операция
- Press the power button (if available, otherwise the SELECT button usually powers it on) to turn on the device.
- басыңыз ТАНДОО button to cycle through the detection modes: Metal, Wood, and AC Cable. The selected mode will be indicated on the display.
- Place the detector flat against the surface you wish to scan. Ensure the sensor area is in full contact.
- Slowly slide the detector across the surface. The display will show signal strength and indicate when an object is detected.
5.2. Metal Detection
In Metal detection mode, the RB-0003 can detect metal parts in walls up to a depth of 30 mm.
- Select the Metal detection mode.
- Move the device slowly across the surface. The display will show increasing bars as it approaches a metal object.
- A distinct audio alert or visual indicator will confirm the presence of metal.
5.3. Wood Detection
The device can detect wooden profiles with a maximum dimension of 30 x 30 mm at a depth of 18 mm.
- Switch to Wood detection mode.
- Scan the wall slowly. The detector will indicate the edges and center of wooden studs or beams.
- Mark the detected areas for reference.
5.4. AC Cable Detection
The RB-0003 is capable of detecting live AC 90-250V cables.
- Select the AC Cable detection mode.
- Move the detector slowly over the area. The device will emit a warning and display an icon when live AC voltagе аныкталат.
- Абайлаңыз: Always assume wires are live until confirmed otherwise by a qualified electrician.
6. Техникалык тейлөө
- Тазалоо: Аппаратты жумшак, кургак чүпүрөк менен сүртүңүз. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
- Сактагыч: Store the detector in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
- Батареяны алмаштыруу: Replace batteries when the low battery indicator appears on the display. Use only the specified battery type.
7. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Түзмөк күйбөй жатат. | Өлүк же туура эмес орнотулган батарейкалар. | Батареянын полярдуулугун текшериңиз же батарейкаларды алмаштырыңыз. |
| Туура эмес окуулар. | Low battery, improper contact with surface, or environmental interference. | Replace batteries. Ensure the device is flat against the surface. Avoid scanning near strong electromagnetic fields. |
| AC режиминде аныктоо жок. | Wires are not live, or too deep. | Ensure power is on to the circuit. Scan slowly and thoroughly. |
8. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель номери | RB-0003 (MIE-RB-0003) |
| Бренд | REBEL |
| Металлдарды аныктоо тереңдиги | 30 мм чейин |
| Жыгачты аныктоо тереңдиги | Up to 18 mm (for 30x30 mm profiles) |
| AC Cable Detection | 90-250V |
| Дисплей өлчөмү | 51 x 25 мм |
| Төмөн батарея көрсөткүчү | Ооба |
| Power Source | Батарея менен иштейт |
| Продукциянын өлчөмдөрү | 15.5 x 5.4 x 2.7 см |
| Элемент Салмагы | 157 грамм |
| Эл аралык коргоо рейтинги | IP66 |
9. Кепилдик жана колдоо
REBEL products are manufactured to high-quality standards and are guaranteed against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official REBEL webсайт.
For technical support, troubleshooting assistance, or spare parts, please contact your local REBEL dealer or customer service department. Contact information can typically be found on the product packaging or the official REBEL webсайт.