SINOTIMER TM618 -7 Days Programmable Weekly Timer Module

1. Бүттүview

The SINOTIMER TM618 timer module is designed to automatically control the power supply to various electrical apparatus, such as streetlights, neon signs, billboards, and other appliances, based on a preset time schedule. This digital timer switch features a rechargeable internal battery to maintain program settings during power outages.

Сүрөт 1.1: Алдыңкы view of the TM618 Timer Module.

2. Негизги өзгөчөлүктөрү

• Компакт жана мейкиндикти үнөмдөөчү дизайн.
• Engineered with advanced digital timing technology.
• High functionality for precise time control.
• Built-in rechargeable battery for program retention.
• Multiple ON/OFF programs for weekly scheduling.

3. Орнотуу жана орнотуу

3.1. Электр схемасы

Proper wiring is crucial for the safe and correct operation of the TM618 timer module. Refer to the diagram below for connection details. Ensure power is disconnected before performing any wiring.

Figure 3.1: Wiring Terminals and Specifications.

• Input (200-250VAC): Connect your main power supply to terminals 1 and 2.
• Output (16 AMP / 250VAC, 20 AMP @30 VDC): Terminals 3, 4, and 5 are for the controlled output. Terminal 3 is common, Terminal 4 is normally open (NO), and Terminal 5 is normally closed (NC). Connect your load to the appropriate terminals based on your application (e.g., between 3 and 4 for normally off, turning on when timed).

3.2. Баштапкы кубаттоо жана батарея

Upon initial power-up, the timer's internal rechargeable battery (40mAh) will begin charging. This battery saves your programmed settings during power interruptions. Allow the unit to be powered for at least 30 minutes for the battery to gain sufficient charge before programming or disconnecting power.

Figure 3.2: Internal 40mAh Rechargeable Battery.

Figure 3.3: TM618 Operating Voltage (220V AC shown).

4. Иштөө нускамалары

The TM618 timer allows for precise control with up to 16 ON/OFF programs per day or week. The buttons on the front panel are used for setting the time and programs.

Figure 4.1: Timer Module with Manual.

4.1. Учурдагы убакытты коюу

1. басыңыз СААТ баскычын басып, кармап туруңуз.
2. Кармап жатканда СААТ, басыңыз ЖУМА жуманын учурдагы күнүн коюу.
3. Кармап жатканда СААТ, басыңыз HOUR учурдагы саатты коюуга.
4. Кармап жатканда СААТ, басыңыз MIN учурдагы мүнөттү коюуга.
5. бошотуңуз СААТ баскычын басыңыз. Убакыт эми коюлду.

4.2. КҮЙГҮЗҮҮ/ӨЧҮРҮҮ Убакыттарын программалоо

Таймер 16га чейин КҮЙГҮЗҮҮ/ӨЧҮРҮҮ программаларын колдойт. Ар бир программа КҮЙГҮЗҮҮ убактысынан жана ӨЧҮРҮҮ убактысынан турат.

1. басыңыз ПРОГ баскычын бир жолу басыңыз. Дисплейде "1 ON" көрсөтүлөт.
2. Басыңыз ЖУМА to select the day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU, or combinations like MO-FR, SA-SU, MO-SA, etc.).
3. Басыңыз HOUR каалаган КҮЙГҮЗҮҮ саатын коюу үчүн.
4. Басыңыз MIN каалаган КҮЙГҮЗҮҮ МҮНӨТҮН коюу үчүн.
5. Басыңыз ПРОГ кайрадан. Дисплейде "1 OFF" көрсөтүлөт.
6. Repeat steps 2-4 to set the desired OFF day(s), hour, and minute for this program.
7. Басыңыз ПРОГ to advance to the next program ("2 ON") or to exit programming mode if no more programs are needed.
8. To clear a program, press ЧАКЫРУУ while viewing the specific ON or OFF program you wish to clear.

4.3. Кол менен өзгөртүү

басыңыз КОЛ button to cycle through different operating modes:

• АВТО КҮЙҮҮ: The timer is currently ON and will follow the programmed schedule.
• АВТО ӨЧҮРҮҮ: The timer is currently OFF and will follow the programmed schedule.
• КҮЙҮК: The timer is forced ON, overriding any programs.
• ӨЧҮК: The timer is forced OFF, overriding any programs.

4.4. Чакырып алуу функциясы

The ЧАКЫРУУ button (often marked 'R' or 'RESET') is used to clear specific program settings or to reset the timer. A small pinhole button (R) is typically used for a full reset, which clears all programs and resets the time.

5. Техникалык тейлөө

5.1. Батареяга кам көрүү

The TM618 features a built-in rechargeable battery. To ensure its longevity and proper function, keep the timer connected to power for regular charging. If the timer is stored for extended periods without power, the battery may discharge, requiring a full charge upon reconnection.

5.2. Тазалоо

Clean the exterior of the timer module with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the plastic casing же дисплей. Түзмөккө суюктуктардын кирбегенин текшериңиз.

6. Кыйынчылыктарды

• Дисплей бош: Check power connections. Ensure the unit has been powered for at least 30 minutes to charge the internal battery.
• Программалар аткарылбай жатат: Verify that the current time is set correctly. Check that the timer is in "AUTO ON" or "AUTO OFF" mode, not forced ON/OFF. Review тактыгы үчүн программаланган КҮЙГҮЗҮҮ/ӨЧҮРҮҮ убакыттарыңыз.
• Timer not responding to buttons: Perform a full reset using the small 'R' pinhole button. If issues persist, ensure proper power supply.

7. Техникалык шарттар

7.1. Өлчөмдөр

Figure 7.1: Front Dimensions.

Figure 7.2: Side Dimensions.

8. Кепилдик жана колдоо

For information regarding product warranty, technical support, or service, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for any warranty claims.