EUROBOOR Magnetic Drill Press ECO.36+ Instruction Manual

1. Маанилүү коопсуздук нускамалары

Бул электр куралы менен берилген бардык коопсуздук эскертүүлөрүн, нускамаларды, иллюстрацияларды жана спецификацияларды ар дайым окуп, түшүнүңүз. Төмөндө саналып өткөн бардык көрсөтмөлөрдү аткарбоо электр тогуна, өрткө жана/же олуттуу жаракатка алып келиши мүмкүн. Келечекте маалымдоо үчүн бардык эскертүүлөрдү жана нускамаларды сактаңыз.

• Жеке коргонуу каражаттары: Always wear appropriate safety glasses, hearing protection, and gloves when operating the drill.
• Жумуш аймагынын коопсуздугу: Жумушчу жерди таза жана жакшы жарыктандырыңыз. Башаламан же караңгы жерлер кырсыкка чакырат. Жарылуучу чөйрөдө, мисалы, күйүүчү суюктуктар, газдар же чаң бар жерде электр шаймандарын иштетпеңиз.
• Электр коопсуздугу: Ensure the power supply matches the tool's requirements (110 Volts, 9.5 Amps). Avoid body contact with earthed or grounded surfaces. Do not expose power tools to rain or wet conditions.
• Курал операциясы: Электр аспапты күчтөп албаңыз. Колдонмоңуз үчүн туура электр шайманын колдонуңуз. Кандайдыр бир тууралоолорду жасоодон, аксессуарларды алмаштыруудан же электр шаймандарын сактоодон мурда вилканы кубат булагынан ажыратыңыз.
• Магниттик база: Ensure the magnetic base is fully engaged on a clean, flat, ferromagnetic surface before starting the motor. The TempTec 2-Way Magnet engages at 50% capacity until the motor is switched on, reducing heat and extending machine life.
• Автоматтык өчүрүү: The GYRO-TEC safety feature automatically shuts off the motor with sudden displacement, acceleration, loss of magnetic force, or excessive vibration.
• Күч коргоо: This drill includes Enhanced Power Protection against power fluctuations and surges, improving reliability in varying power supply conditions.

2. Продукт бүтүп калдыview

The EUROBOOR ECO.36+ is a low-profile magnetic drill press designed for efficient and precise drilling in various steel structures. Its compact size and powerful motor make it ideal for applications in confined spaces.

Image 1: The EUROBOOR ECO.36+ Magnetic Drill Press, showcasing анын компакттуу дизайны жана интеграцияланган туткасы.

Негизги өзгөчөлүктөрү:

• Күчтүү мотор: 9.5A motor with a no-load speed of 700 RPM (400 RPM under 9.5A load).
• Annular Cut Capacity: 7/16" - 1-7/16" capacity.
• Күчтүү магниттик база: 2645 lbs magnetic base force for secure attachment.
• Төмөн Проfile Дизайн: Measures only 165 mm (6 1/2") in height, suitable for limited access areas.
• GYRO-TEC Automatic Shut-Off: Enhances safety by detecting sudden movements or loss of magnetic force.
• Enhanced Power Protection: Protects against power fluctuations and surges.
• TempTec 2-Way Magnet: Reduces energy consumption and heat, extending magnet life.

Сүрөт 2: Каптал view of the ECO.36+ highlighting key safety and operational features like GYRO-TEC, TempTec, and power protection.

3. Компоненттер жана башкаруу элементтери

Familiarize yourself with the various components and controls of your ECO.36+ magnetic drill press before operation.

Сүрөт 3: жогорудан ылдыйга view of the control panel, showing the motor and magnet switches.

Башкаруу панелинин функциялары:

• Motor ON/OFF Switch (Green/Red): The green button (labeled 'I' or '+') starts the drill motor. The red button (labeled 'O' or '-') stops the drill motor.
• Magnet ON/OFF Switch (Red Toggle): This switch controls the magnetic base. Position 'I' engages the magnet, securing the drill to the workpiece. Position 'O' disengages the magnet.
• Carbon Brush Wear Indicator: A small light or indicator (as shown in Image 2) that illuminates when the carbon brushes require replacement.

4. Орнотуу

4.1 Таңгактан чыгаруу жана текшерүү

Carefully remove the drill press from its packaging. Inspect the tool for any signs of damage that may have occurred during transit. Report any damage to your supplier immediately.

4.2 Тутканы бекитүү

1. Locate the ratcheting feed handle.
2. Insert the handle into the designated socket on the side of the drill body.
3. Анын бекем бекитилишин текшериңиз.

4.3 Бургулоочу дөңгөлөктү бекитүү

1. Ensure the workpiece surface is clean, flat, and free of debris, rust, or paint to allow for maximum magnetic adhesion.
2. Position the magnetic drill press over the desired drilling location.
3. Engage the magnet by switching the Magnet ON/OFF switch to the 'I' position. Verify that the drill is firmly secured to the workpiece before proceeding. The TempTec magnet will engage at 50% power initially.

4.4 Annular Cutter Installation

1. Бургулоочу шаймандын электр булагынан ажыратылганын текшериңиз.
2. Insert the annular cutter into the arbor, ensuring the flats on the cutter shank align with the set screws in the arbor.
3. Tighten the set screws firmly with the provided hex key to secure the cutter.
4. Insert the pilot pin into the center of the annular cutter. The pilot pin helps center the cutter and eject the slug after drilling.

5. Операция

5.1 Операцияга чейинки текшерүүлөр

• Confirm the drill is securely attached to the workpiece.
• Verify the annular cutter and pilot pin are correctly installed and tightened.
• Бардык коопсуздук коргоочулар ордунда экенин камсыз кылуу.
• Wear all required personal protective equipment.

5.2 Бургулоо процедурасы

1. Connect the drill to a suitable power supply.
2. Engage the magnetic base by switching the Magnet ON/OFF switch to 'I'.
3. Press the green Motor ON button to start the drill motor. The TempTec magnet will now engage at full power.
4. Slowly feed the cutter into the workpiece using the feed handle. Apply steady, even pressure. Do not force the drill.
5. Apply cutting fluid or coolant as necessary to prolong cutter life and improve cutting performance.
6. Once the hole is complete, retract the cutter from the workpiece.
7. Press the red Motor OFF button to stop the motor.
8. Switch the Magnet ON/OFF switch to 'O' to disengage the magnetic base.
9. Carefully remove the drill from the workpiece.

Image 4: The ECO.36+ magnetic drill press securely attached to and drilling into an I-beam, demonstrating its application in structural steelwork.

6. Техникалык тейлөө

Regular maintenance ensures the longevity and optimal performance of your EUROBOOR ECO.36+.

6.1 Жалпы тазалоо

• After each use, clean the drill press, especially the magnetic base and cutter area, to remove metal chips and debris.
• Use a dry cloth or soft brush. Do not use solvents that may damage plastic parts.

6.2 Көмүртек щеткасын алмаштыруу

When the carbon brush wear indicator illuminates, the carbon brushes need to be replaced. This should be performed by qualified personnel following the specific instructions in the full service manual.

6.3 Майлоо

Periodically check and lubricate moving parts as recommended in the comprehensive service manual to ensure smooth operation.

6.4 Сактоо

Store the drill press in a clean, dry, and secure location, out of reach of children and unauthorized users.

7. Кыйынчылыктарды

This section addresses common issues you might encounter with your ECO.36+.

8. Техникалык шарттар

Technical specifications for the EUROBOOR ECO.36+ Magnetic Drill Press.

Image 5: Technical drawing illustrating the dimensions of the EUROBOOR ECO.36+ magnetic drill press.

9. Кепилдик жана колдоо

EUROBOOR products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official EUROBOOR webсайт.

For technical assistance, spare parts, or service inquiries, please contact EUROBOOR customer support through their official channels. Always provide your product model number (ECO.36+) and serial number when seeking support.