1. Киришүү
This manual provides detailed instructions for the safe and effective use of the GYS 059856 Paint Thickness Gauge. This portable device is designed for quick and easy measurement of non-magnetic coatings (such as paint or film) on metallic surfaces. It is an essential tool for various applications including the processing industry, automotive repair, metal treatment, chemical industry, and goods inspection.
Сураныч, аппаратты иштетүүдөн мурун бул колдонмону кылдат окуп чыгыңыз жана аны келечекте маалымат үчүн сактап коюңуз.
2. Коопсуздук маалыматы
- Always ensure the device is clean and dry before use.
- Аппаратты экстремалдык температурага, нымдуулукка же түз күн нуруна калтырбаңыз.
- Аппаратты түшүрүүдөн же катуу таасирлерден сактаныңыз.
- Аппаратты өз алдынча бөлүүгө же оңдоого аракет кылбаңыз. Тейлөө үчүн квалификациялуу кызматкерлерге кайрылыңыз.
- Аппаратты балдар жетпеген жерде сактаңыз.
- Батареяларды жергиликтүү эрежелерге ылайык таштаңыз.
3. Продукт бүтүп калдыview
The GYS 059856 Paint Thickness Gauge features a compact design with an LCD display and intuitive controls.
Сүрөт 1: Алдыңкы view of the GYS 059856 Paint Thickness Gauge. The device is yellow with a black LCD screen at the top. Below the screen are three black buttons: 'MODE' on the left, 'UNIT' on the right, and 'ZERO' with a power symbol in the center bottom.
3.1 Негизги компоненттер
- LCD дисплей: Shows measurement readings, units, and mode indicators.
- MODE баскычы: Used to switch between measurement modes (Single, Continuous, Differential).
- UNIT баскычы: Used to switch between metric (µm) and imperial (mils) units.
- ZERO баскычы: Used for zero calibration and powering the device on/off.
- Measurement Probe: Located at the bottom of the device, used to contact the surface for measurement.
4. Орнотуу
4.1 Батареяны орнотуу
Locate the battery compartment on the back of the device. Insert the required batteries, ensuring correct polarity. Close the battery compartment securely.
4.2 Күйгүзүү/өчүрүү
басып, кармап туруңуз НӨЛ button to power on the device. To power off, press and hold the НӨЛ button again. The device also features an automatic shut-off function to conserve battery life.
5. Иштөө нускамалары
The GYS 059856 offers three measurement modes and supports both metric and imperial units.
5.1 Өлчөө бирдиктерин тандоо
басыңыз UNIT button to toggle between metric (µm) and imperial (mils) units.
5.2 Өлчөө режимдери
басыңыз РЕЖИМ button to cycle through the following measurement modes:
- Single Measurement Mode: Takes a single reading each time the probe is placed on the surface.
- Continuous Measurement Mode: Continuously takes readings as the probe is moved across the surface.
- Differential Measurement Mode: Displays the difference between the current reading and a previously set reference value.
5.3 Ченөө
- Ensure the surface to be measured is clean and free of debris.
- Select the desired measurement unit and mode.
- Place the measurement probe firmly and perpendicularly onto the coated metallic surface.
- Read the thickness value displayed on the LCD screen.
- Lift the device from the surface to prepare for the next measurement (in Single mode).
6. Калибрлөө
Accurate measurements depend on proper calibration. The device supports three calibration functions:
6.1 Нөл калибрлөө
This calibration is performed on an uncoated, bare metallic surface to establish a zero reference point. Place the probe on a clean, uncoated metal surface and follow the on-screen instructions or refer to the device's specific calibration sequence (usually involving the НӨЛ баскычы).
6.2 Эки чекиттүү калибрлөө
This method uses two known thickness standards (e.g., a thin film and a thicker film) to calibrate the device across a range. This provides more accurate readings for varying thicknesses.
6.3 Easy Calibration
Refer to the device's specific instructions for "Easy Calibration," which may involve a simplified process for quick adjustments.
Note: Always calibrate the device before critical measurements or if you suspect inaccurate readings.
7. Техникалык тейлөө
- Тазалоо: Аппаратты жумшак, кургак чүпүрөк менен сүртүңүз. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
- Сактагыч: Store the device in a dry, cool place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries.
- Пробка кам көрүү: Keep the measurement probe clean and free from scratches or damage.
8. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Түзмөк күйбөйт. | Төмөн же өлүп калган батарейкалар; туура эмес батареянын полярдуулугу. | Батареяларды алмаштыруу; батареянын багытын текшерүү. |
| Туура эмес окуулар. | Device not calibrated; dirty probe; surface not clean; incorrect measurement mode. | Perform calibration; clean probe and surface; select appropriate measurement mode. |
| Display shows "OL" or "Err". | Measurement range exceeded; sensor error. | Ensure measurement is within device's range; restart device. If error persists, contact support. |
9. Техникалык шарттар
- Модел: GYS 059856
- Өндүрүүчү: GYS
- Продукциянын өлчөмдөрү (L x W x Y): 10.5 x 6.1 x 2.8 см
- Салмагы: 137 грамм
- Өлчөө принциби: Non-magnetic coating on metallic surfaces
- Өлчөө бирдиктери: Metric (µm), Imperial (mils)
- Өлчөө режимдери: Single, Continuous, Differential
- Calibration Functions: Zero calibration, 2-point calibration, Easy calibration
- Автоматтык түрдө өчүрүү: Ооба
- ASIN: B09GS7G1N4
- Өндүрүүчүнүн шилтемеси: 059856
- Запастык бөлүктөрдүн болушу: Маалымат жеткиликтүү эмес
10. Кепилдик жана колдоо
For warranty information and technical support, please refer to the official GYS website or contact your local distributor. Information regarding spare parts availability is not provided in the product specifications.
GYS Official Webсайт: www.gys.fr
