Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Pipishell Full Motion TV Wall Mount. Please read this manual thoroughly before installation to ensure safe and correct usage. Keep this manual for future reference.
Image: The Pipishell Full Motion TV Wall Mount, showcasing its articulating arm and VESA plate.
Коопсуздук маалыматы
Improper installation or use of this product can result in serious injury or damage. Please adhere to the following safety guidelines:
- Орнотуучу бети орнотуунун жана телевизордун жалпы салмагын коопсуз көтөрө ала тургандыгын текшериңиз.
- Do not mount on drywall alone. This mount requires installation into a single wood stud, concrete wall, or block wall.
- Бардык берилген жабдыктарды колдонуңуз жана бөлүктөрүн алмаштырбаңыз.
- Орнотуу процессинин кандайдыр бир бөлүгүнө ишенбесеңиз, квалификациялуу адиске кайрылыңыз.
- Орнотуу учурунда балдарды жана үй жаныбарларын алыс кармаңыз.
Image: Illustration showing compatible wall types: concrete wall, single wood stud, and block wall. A warning indicates not to mount on drywall alone.
Пакеттин мазмуну
Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact Pipishell customer support.
| Компонент | Саны |
|---|---|
| Дубал плитасынын жыйындысы | 1 |
| TV кронштейн | 1 |
| Mounting Hardware (screws, anchors, washers) | Ассорти |
| Instruction Manual | 1 |
Орнотуу & Орнотуу
Follow these steps carefully for a secure installation:
- Шайкештикти текшерүү: Before starting, ensure your TV's VESA pattern (Max: 100x100mm, Min: 75x75mm) and weight (Max: 33 lbs) are compatible with this mount.
- Орнотуу ордун табыңыз: Choose a suitable location on a single wood stud, concrete, or block wall. Use a stud finder to accurately locate the center of the wood stud if applicable.
- Дубал плитасы: Secure the wall plate to the chosen wall type using the appropriate anchor bolts and hardware. Ensure it is level and firmly attached.
- Attach TV Bracket: Fasten the TV bracket to the back of your television using the provided screws that match your TV's VESA pattern.
- Hang Display: Carefully lift the television with the attached bracket and hook it onto the wall plate assembly. Ensure it is securely seated.
Image: Diagram illustrating VESA mounting patterns (100x100mm, 75x75mm) and maximum load capacity of 33 lbs for TV sizes 13-26 inches.
Image: Visual guide showing three steps: 1) Mount Wall Plate, 2) Attach TV Bracket, 3) Hang Display.
Иштөө нускамалары
Your Pipishell Full Motion TV Wall Mount offers versatile adjustments for optimal viewing:
- Айлануучу: The mount allows for a swivel range of up to ±90° (depending on TV size and wall distance) to adjust the horizontal viewбурч.
- Россия: Adjust the vertical tilt from -15° to +5° to reduce glare and find the perfect viewбурч.
- Extension & Retraction: Extend the TV up to 10.6 inches from the wall for flexible positioning or retract it to a mere 2.9 inches for a low-profile кара.
- Айлануу: The VESA plate can rotate 360° allowing for landscape or portrait orientation of your display.
Image: A TV mounted on the wall, illustrating the swivel motion of ±90° and the extension/retraction range of 2.9 to 10.6 inches, along with tilt angles of -15° to +5°.
Image: A diagram showing the TV mount's full motion flexibility, including 360° rotation of the VESA plate.
Техникалык тейлөө
To ensure the longevity and proper function of your TV wall mount:
- Бардык бурамалар менен байланыштарды дайыма текшерип туруңуз, алар бекем жана коопсуз бойдон калууда.
- Монтажды жумшак, кургак чүпүрөк менен тазалаңыз. Абразивдүү тазалагычтардан же эриткичтерден качыңыз.
- Do not hang anything from the mount other than the intended television.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Mount feels unstable after installation. | Loose mounting screws or incorrect wall anchors. | Re-check all wall plate screws and ensure they are tightened into a solid stud or appropriate anchors. Refer to installation steps. |
| Difficulty adjusting swivel/tilt. | Joints may be too tight or need lubrication. | Apply a small amount of silicone-based lubricant to the moving joints. Do not over-tighten joint bolts. |
| ТВ деңгээл эмес. | Wall plate installed unevenly. | Adjust the leveling screws on the VESA plate if available, or re-install the wall plate ensuring it is perfectly level. |
Техникалык шарттар
- Модел: PIXSF2
- Бренд: Pipishell
- Материал: Эритме болот
- Түсү: Кара
- Шайкеш сыналгы өлчөмдөрү: 13-26 дюйм
- Максималдуу жүктөө жөндөмдүүлүгү: 33 фунт (15 кг)
- VESA шайкештиги: 75x75мм, 100x100мм
- Кыймыл түрү: Swivel, Rotate, Tilt, Full Motion, Articulating
- Ийилген бурч: -15°тан +5°ка чейин
- Айлануу бурчу: ±90° (max, depends on TV size)
- Дубалдан кеңейтүү: 2.9 inches (retracted) to 10.6 inches (extended)
- Продукциянын өлчөмдөрү: 38.98 x 12.6 x 5.12 inches (mount only)
- Элемент Салмагы: 1.39 фунт
Кепилдик жана колдоо
Pipishell products are designed for durability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official Pipishell webсайт.
For technical support, installation assistance, or any questions regarding your product, please contact Pipishell customer service:
- Электрондук почта: support@pipishell.com
- Webсайт: www.pipishell.com
You can also find additional resources and FAQs on our webсайт.
