Introduction
This manual provides essential information for the safe and efficient operation of your SMACO High-Pressure Air Compressor. Please read this manual thoroughly before using the compressor to ensure proper function and to prevent damage or injury. Keep this manual for future reference.
1-сүрөт: SMACO High-Pressure Air Compressor. This image shows the compact black unit with orange "SMACO X" branding on the fan cover, a pressure gauge, control knobs, and power switches. It also displays the high-pressure hose and battery clamps for 12V DC connection.
Коопсуздук маалыматы
Always observe the following safety precautions to reduce the risk of injury or damage to the compressor:
- Компрессор иштеп жатканда туруктуу, тегиз бетке коюлганын текшериңиз.
- Компрессорду нымдуу шарттарда же тез күйүүчү материалдардын жанында иштетпеңиз.
- Компрессорду иштетип жатканда ар дайым тиешелүү коргоочу көз айнек тагыныңыз.
- Do not exceed the maximum pressure rating of 4500 PSI (300 Bar / 30 MPa).
- Allow the compressor to cool down for 10 minutes after 25 minutes of continuous operation.
- Балдарды жана үй жаныбарларын компрессордон алыс кармаңыз.
- Кандайдыр бир тейлөө же тазалоо иштерин жүргүзүүдөн мурун электр энергиясын өчүрүңүз.
Продукт бүттүview жана өзгөчөлүктөрү
The SMACO High-Pressure Air Compressor is designed for versatility and portability, suitable for various high-pressure air applications.
- Integrated Power Adapter: Built-in transformer for direct connection to 110V/220V AC outlets or 12V DC car batteries.
- Automatic Pressure Shut-off: Алдын ала коюлган басымга жеткенде инфляцияны автоматтык түрдө токтотот.
- Майсыз дизайн: Eliminates the need for oil, ensuring clean and dry air output.
- Желдетүүчү муздатуу системасы: Efficient cooling to maintain optimal operating temperature.
- Water/Oil Separator: Filters out moisture and oil from the compressed air.
- Компакт жана көчмө: Lightweight design with a convenient wire spool for easy transport and storage.
2-сүрөт: Portability of the SMACO Air Compressor. This image illustrates the compact size of the compressor, being held by a person, with dimensions of approximately 10 inches (height), 8.7 inches (depth), and 9.5 inches (width), highlighting its portability and integrated wire spool design.
3-сүрөт: Fan Cooling System. This image shows the internal fan cooling system of the compressor, emphasizing its oil-free operation and integrated oil-moisture filter. It also reminds users of the 25 minutes run / 10 minutes cool duty cycle.
Тиркемелер
The SMACO High-Pressure Air Compressor is suitable for inflating various high-pressure air devices, including:
- PCP Airguns
- Paintball Tanks
- Mini Scuba Tanks
4-сүрөт: Wide Range of Applications. This image displays the compressor's versatility, showing it being used for paintball airguns, PCP rifles, and mini scuba tanks, with approximate inflation times for different tank sizes (0.5L, 1.0L, 2.0L) to 200 bar.
Жайгашуу
Before operating the compressor, ensure proper power connection and preparation.
Кубат менен камсыздоого туташуу:
The compressor supports both 12V DC and 110V/220V AC power sources.
- For 12V DC (Car Battery): кызыл cl туташтырууamp унааңыздын аккумуляторунун оң (+) терминалына жана кара түстөгүamp to the negative (-) terminal. Ensure your car engine is running to provide stable power.
- For 110V/220V AC (Household Outlet): Plug the integrated power cord directly into a standard wall outlet. The compressor has a built-in power adapter.
5-сүрөт: Convenient Power Supply. This image illustrates the two power options: connecting to a 12V car battery (with the car running) and plugging into a 110V/220V AC home outlet, demonstrating the integrated power adapter.
Иштөө нускамалары
Коопсуз жана натыйжалуу иштөө үчүн төмөнкү кадамдарды аткарыңыз:
- Туташуу кубаты: Select the appropriate power source (12V DC or 110V/220V AC) and connect the compressor. Ensure the AC voltage switch (if applicable) is set correctly (110V is default).
- Connect Air Tank: Securely connect the high-pressure hose from the compressor to your air tank (PCP airgun, paintball tank, or mini scuba tank). Ensure all connections are tight to prevent leaks.
- Tighten Bleed Valve: Ensure the bleed valve (usually a knob on the side) is fully tightened before starting inflation.
- Каалаган басымды коюу: Use the pressure setting knob to set your target pressure. The compressor will automatically stop when this pressure is reached. The maximum setting is 4500 PSI (300 Bar).
- Инфляциянын башталышы: Turn on the main power switch, then press the "START" button. The compressor will begin filling the tank.
- Монитордун иштеши: Observe the pressure gauge during inflation. The compressor will automatically shut off when the preset pressure is achieved.
- Толтургандан кийин: Once the compressor stops, turn off the main power switch. Slowly loosen the bleed valve to release residual pressure from the hose before disconnecting the air tank.
- Муздатуу: Allow the compressor's fan to run for 2-3 minutes after operation to aid cooling, then turn off the fan.
6-сүрөт: Intelligent Pressure System. This image highlights the automatic pressure setting and shut-off feature, showing a user relaxing while the compressor inflates a tank, with a close-up of the pressure gauge indicating the automatic stop function.
7-сүрөт: Detailed Operation Steps. This image provides a four-step visual guide to operating the compressor: 1) Connecting power (AC or DC), 2) Tightening the bleed valve and connecting the hose to the air tank, 3) Setting the air pressure and starting inflation, and 4) Post-filling procedures including turning off the compressor, loosening the bleed valve, disconnecting the hose, and turning off the fan.
Техникалык тейлөө
Компрессорду үзгүлтүксүз техникалык тейлөө анын узак мөөнөттүү иштешин жана оптималдуу иштешин камсыз кылат.
- Муздатуу: Adhere to the duty cycle of 25 minutes run time followed by 10 minutes cool down. This prevents overheating and extends the life of the compressor.
- Oil-Free System: This compressor is oil-free, eliminating the need for oil changes.
- Фильтрди тейлөө: The dual filtration system (5µm fiber and activated carbon) helps ensure clean, dry air. Periodically check and replace filter elements as needed to maintain air quality.
- Тазалоо: Keep the exterior of the compressor clean and free of dust and debris. Ensure the fan vents are unobstructed for proper airflow.
- Сактагыч: Компрессорду кургак, салкын жерде, күндүн түз тийген нурларынан жана өтө жогорку температурадан алыс сактаңыз.
Проблемаларды чечүү
If you encounter issues with your SMACO compressor, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Компрессор иштебейт. | Электр кубаты жок, туташуу үзгүлтүккө учурайт, кубат өчүрүлөт. | Check power source, ensure connections are secure, turn on power switch. |
| Компрессор эрте токтойт. | Preset pressure reached, overheating, power interruption. | Check preset pressure, allow unit to cool down, verify stable power supply. |
| Туташуулардан аба агып жатат. | Loose hose connections, worn O-rings. | Tighten all connections, inspect and replace O-rings if damaged. |
| Жай инфляция. | Clogged filter, low power supply. | Check and replace filter elements, ensure adequate power (e.g., car engine running for 12V DC). |
If the problem persists, contact SMACO customer support for assistance.
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель номери | HEAP1 |
| Өлчөмдөрү (L x W x Y) | 9.5 x 5.6 x 10 см (болжол менен 3.7 x 2.2 x 3.9 дюйм) |
| Салмагы | 9.7 кг (болжол менен 21.4 фунт) |
| Power Source | 12V DC (car battery), 110V/220V AC (household electricity) |
| Ватtage | 250 Вт |
| Макс басым | 4500 PSI / 30 MPa / 300 Bar |
| Ызы-чуу деңгээли | 70 дБ |
| Муздатуу системасы | Желдетүүчү муздатуу |
| Фильтрация | Oil-free, 5µm fiber filter, activated carbon |
| Милдеттик цикл | 25 minutes run / 10 minutes cool |
Кепилдик жана колдоо
For warranty information or technical support, please contact SMACO customer service. Keep your purchase receipt as proof of purchase.
Note: Specific warranty terms may vary by region and retailer. Please refer to the documentation provided at the time of purchase or contact SMACO directly for details.
