1. Киришүү
Thank you for choosing the VENTS-US VKM 100 Metal Inline Duct Fan. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new ventilation fan. Please read this manual thoroughly before installation and keep it for future reference.
The VKM 100 is a high-performance inline centrifugal duct fan designed for various ventilation applications, including bathroom exhaust, kitchen ventilation, living areas, and whole-house ventilation. It features a durable metal housing with polymer coating and a backward curved centrifugal impeller for efficient airflow.
2. Коопсуздук маалыматы
Өрт, электр шок же адамдардын жаракат алуу коркунучун азайтуу үчүн төмөнкүлөрдү сактаңыз:
- Read all instructions before installing or servicing this fan.
- Монтаждоо иштери жана электр зымдары квалификациялуу адам(лар) тарабынан бардык колдонулуучу коддорго жана стандарттарга, анын ичинде өрткө каршы курулушка ылайык аткарылышы керек.
- Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel-burning equipment to prevent back-drafting. Follow the heating equipment manufacturer's guideline and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.
- Дубалды же шыпты кесип же бургулоодо электр зымдарын жана башка жашыруун коммуникацияларды бузбаңыз.
- Түтүктүү желдеткичтерди дайыма сыртка чыгаруу керек.
- Do not use this fan with any solid-state speed control device unless specifically designed for this fan.
- This unit has an ungrounded power cord. Ensure proper grounding according to local electrical codes.
- Агрегатты тейлөөдөн же тазалоодон мурун ар дайым кубаттан ажыратыңыз.
- Бул желдеткичти тез күйүүчү же жарылуучу материалдар бар жерлерде колдонбоңуз.
- The fan is designed for indoor use. If installed outdoors, ensure it is protected from rain and direct weather exposure.
3. Продукт бүтүп калдыview
The VKM 100 is a robust inline duct fan featuring a durable blue polymer-coated metal casing and a powerful centrifugal impeller. It is designed to boost airflow through long or complex duct runs.
Сүрөт 3.1: Алдыңкы view of the VENTS-US VKM 100 Metal Inline Duct Fan, showing the blue casing, motor housing, and power cord with control box.
3.2-сүрөт: Бурчтуу view of the VKM 100 fan, highlighting the internal centrifugal impeller and the robust metal housing.
3.3-сүрөт: Жогорку view of the VKM 100 fan, displaying the product label with model number, electrical specifications, and safety certifications.
3.4-сүрөт: Каптал view of the VKM 100 fan, showing one of the pre-attached mounting brackets for easy installation.
Сүрөт 3.5: Карама-каршы тарап view of the VKM 100 fan, illustrating the second mounting bracket for secure attachment.
Негизги өзгөчөлүктөрү:
- Жогорку аба агымы: 174 CFM under 0" of static pressure; 162 CFM under 0.2" of static pressure.
- Натыйжалуу мотор: Single-phase external rotor motor with backward curved centrifugal impellers, consuming 108 W.
- Оңой орнотуу: Includes mounting brackets and a power cord for straightforward setup.
- Durable Bearings: Permanently lubricated ball bearing motor for maintenance-free operation.
- Ар тараптуу колдонмолор: Suitable for bathroom exhaust, kitchen ventilation, living areas, whole house ventilation, duct boosting, workshops, smoking areas, offices, bars, restaurants, and warehouses.
- Dual Usage: Can be used as either a supply boosting or extract boosting fan.
4. Орнотуу жана орнотуу
4.1 Орнотууга чейинки текшерүү тизмеси:
- Verify that the fan's voltage and frequency match your power supply.
- Бардык компоненттердин бар экенин жана бузулбаганын текшериңиз.
- Confirm the ducting size (4 inches) matches the fan's diameter.
- Gather necessary tools: screwdriver, drill, measuring tape, duct clamps or aluminum tape, wire strippers (if hardwiring).
4.2 Орнотуу кадамдары:
- Жайгашкан жерди тандоо: Select a suitable location within your ducting system. The fan can be mounted at any angle. Ensure there is sufficient space for maintenance and airflow.
- Монтаждоо: Use the integrated mounting brackets to secure the fan to a stable surface (e.g., ceiling joist, wall stud, or dedicated mounting frame). Mark and drill pilot holes, then fasten the fan securely using appropriate screws.
- Канал туташуу: Connect the fan to the existing ductwork using duct clamps or aluminum tape to ensure airtight seals. Ensure the airflow direction indicated on the fan matches your desired ventilation path.
- Электр байланышы:
- Ensure power is OFF at the circuit breaker before making any electrical connections.
- The fan comes with a power cord. Plug the fan into a grounded electrical outlet.
- If hardwiring, consult a qualified electrician to connect the fan to your electrical system in accordance with local codes.
- Акыркы текшерүү: Once installed, visually inspect all connections for security and proper sealing. Ensure no obstructions are present in the ductwork or near the fan's inlet/outlet.
Эскертүү: For detailed diagrams and specific installation scenarios, please refer to the full Installation Manual (PDF) available on the product's Amazon page or the VENTS-US webсайт.
5. Иштөө нускамалары
5.1 Негизги операция:
The VKM 100 fan is designed for continuous or intermittent operation.
- To turn the fan ON/OFF, use the wall switch or control device connected to the fan's power supply.
- The fan operates at a single speed (3000 RPM) and provides an airflow capacity of 174 Cubic Feet Per Minute (CFM).
- The VKM series can be used as either a supply boosting fan (to push fresh air into a space) or an extract boosting fan (to pull stale air out of a space).
5.2 Recommended Applications:
- Bathroom exhaust
- Ашкананы желдетүү
- Living area ventilation
- Whole house ventilation
- Duct boosting
- Workshops & smoking areas
- Offices, bars & restaurants
- Складдар
6. Техникалык тейлөө
Regular maintenance ensures optimal performance and longevity of your VKM 100 fan.
6.1 Тазалоо:
- Кубатты өчүрүү: Always ensure the fan is disconnected from the power supply before any cleaning or maintenance.
- Clean Impeller and Casing: Periodically inspect the impeller and the interior of the fan casing for dust and debris buildup. Use a soft brush or vacuum cleaner to remove any accumulation. Do not use abrasive cleaners or solvents.
- Тышкы тазалоо: Жарнама менен желдеткичтин сыртын сүртүңүзamp кездеме.
6.2 Майлоо:
The VKM series features a permanently lubricated ball bearing motor, which requires no additional lubrication throughout its operational life.
6.3 Текшерүү:
Regularly check the duct connections for any leaks or disconnections. Ensure mounting brackets remain secure.
7. Кыйынчылыктарды
If you encounter issues with your VKM 100 fan, refer to the table below for common problems and their solutions.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Желдеткич күйбөйт. | No power supply; loose wiring; faulty switch/control. | Check power outlet, circuit breaker. Ensure all electrical connections are secure. Test switch/control. |
| Төмөн аба агымы. | Blocked ductwork; dirty impeller; incorrect duct size; air leaks in ducting. | Inspect and clear duct obstructions. Clean impeller. Ensure proper duct size (4"). Seal any duct leaks. |
| Ашыкча ызы-чуу же титирөө. | Loose mounting; foreign object in impeller; damaged impeller; motor issue. | Tighten mounting screws. Disconnect power and check for foreign objects. If noise persists, contact support. |
| Вентилятор үзгүлтүк менен иштейт. | Overheating (thermal overload); faulty wiring/control. | Ensure adequate ventilation around the fan. Check electrical connections and control unit. |
If the problem persists after attempting these solutions, please contact VENTS-US customer support.
8. Техникалык шарттар
| Спецификация | Нарк |
|---|---|
| Бренд | ШЫГАРУУ |
| Модель аты | ВКМ 100 |
| Өлчөмү | 4" Metal inline Centrifugal Duct Fan |
| Аба агымынын кубаттуулугу | Мүнөтүнө 174 куб фут (CFM) |
| CFM Level (0" static pressure) | 174 CFM |
| CFM Level (0.2" static pressure) | 162 CFM |
| Ватtage | 108 ватт |
| Тtage | 120 вольт |
| Ылдамдык | 3000 RPM |
| Ызы-чуу деңгээли | 2.3 Sones |
| Продукциянын өлчөмдөрү (D x W x Y) | 8.06"D x 11.75"W x 10"H |
| Элемент Салмагы | 9 фунт |
| Түс | Көк |
| Аяктоо түрү | Polymer Coated |
| Бычактын материалы | Пластик |
| Өзгөчө өзгөчөлүк | Centrifugal Impeller |
| Натыйжалуулук | 1.61 CFM/Watt |
| Specification Met | ETL |
| Ички/тышкы колдонуу | Indoor (with protection from rain if outdoors) |
9. Кепилдик жана колдоо
9.1 Кепилдик маалыматы:
VENTS-US products are manufactured to the highest quality standards. Specific warranty terms and conditions for your VKM 100 fan are typically provided with the product packaging or can be found on the official VENTS-US webсайт. Кепилдик дооматтары үчүн сатып алганыңыздын далилин сактап коюңуз.
9.2 Кардарларды колдоо:
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact VENTS-US customer support.
- Webсайт: Visit the official VENTS-US webбайланыш маалыматы, көп берилүүчү суроолор жана кошумча ресурстар үчүн сайт.
- Онлайн ресурстар: Additional user manuals and installation guides (PDFs) may be available on the product's Amazon listing or the manufacturer's webсайт.
