FLYLINKTECH унаасын стартердин колдонуучу колдонмосу

1. Киришүү

The FLYLINKTECH CF600 Car Jump Starter is a portable, powerful device designed to start vehicles with dead batteries. It features a 1500A peak current, suitable for gasoline engines up to 8.0 liters and diesel engines up to 6.0 liters. Beyond its primary function, it also serves as a 16000mAh power bank for charging electronic devices and includes a multi-function LED light for various utility purposes. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting of your jump starter.

Figure 1: FLYLINKTECH Car Jump Starter with smart clampжана кубаттоочу кабелдер.

2. Коопсуздук маалыматы

Please read all safety warnings and instructions carefully before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• Always ensure the jump starter is fully charged before use.
• Секирүү стартери же кабелдери бузулуп калса, унааны секирип от алдырууга аракет кылбаңыз.
• cl туташтырууamps correctly: Red clamp to positive (+) terminal, Black clamp to negative (-) terminal. Reverse polarity can cause damage.
• Оң жана терс кл байланыштырбаampбирге.
• Балдар жетпеген жерде сактаңыз.
• Продукцияны жамгыр же нымдуу шарттарга дуушар кылбаңыз.
• Агрегатты ажыратпаңыз. Бардык тейлөөлөрдү квалификациялуу кызматкерлерге тапшырыңыз.
• Стартерди туташтыруудан мурун, унаанын от алдыруу системасы өчүрүлгөндүгүн текшериңиз.
• Remove the jump starter from the vehicle battery within 30 seconds after the engine starts.
• Аппараттын өзгөчөлүктөрү 8 Smart Safe Clamp Коргоо, including reverse polarity, overcharge, short circuit, high temperature, over voltage, and over current protection. However, always exercise caution.

Figure 2: Intelligent clamps with built-in safety features for protection against common errors.

3. Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

• FLYLINKTECH Car Jump Starter Unit
• Smart Jumper Clamps (Кызыл жана Кара)
• USB заряддоо кабели
• EC5 Female Adapter
• Колдонуучунун колдонмосу (бул документ)
• Сактоочу куту

4. Продукт бүтүп калдыview

The FLYLINKTECH Car Jump Starter is a versatile device designed for emergency vehicle starting and portable power.

Негизги өзгөчөлүктөрү:

• Powerful Jump Starting: 1500A peak current, capable of starting 12V vehicles with up to 8.0L gasoline or 6.0L diesel engines.
• Portable Power Bank: 16000mAh capacity with two USB ports, including one QC3.0 port for fast charging mobile phones, tablets, and other USB-powered devices.
• Multi-Function LED Light: Features Torch, SOS, Quick Flash, and Blue & Red Flashing modes for illumination and emergency signaling.
• Smart Safety Clamps: Equipped with 8 intelligent protections: reverse polarity, overcharge, short circuit, high temperature, over voltage, and over current.
• EC5 Adapter and Safety Hammer: Includes an EC5 female adapter for powering 12V car accessories (e.g., car cleaner, air pump) and a built-in safety hammer for emergency window breaking.
• Компакт жана жеңил: Weighs approximately 1kg with dimensions of 18.5 x 9.5 x 4.5 cm, making it easy to store and carry.

Figure 3: Compact dimensions and lightweight design of the jump starter.

Figure 4: Engine compatibility for the 1500A peak current jump starter.

5. Орнотуу жана баштапкы заряддоо

Before first use, fully charge the jump starter.

1. Connect the provided USB charging cable to the jump starter's input port.
2. Connect the other end of the USB cable to a 5V/2A or higher USB wall adapter (not included) or a computer USB port.
3. Кубаттоо процессин көрсөтүү үчүн стартердеги LED индикатор чырактары күйөт. Толук заряддалганда төрт чырак тең туруктуу күйөт.
4. A full charge typically takes several hours. It is recommended to charge the unit every 3-6 months to maintain battery health, even if not in use.

6. Иштөө нускамалары

6.1. Унааны баштоо

Ensure the jump starter is sufficiently charged (at least 3-4 indicator lights).

1. Унааны даярдоо: Turn off the vehicle's ignition and all electrical loads (headlights, radio, air conditioning, etc.). Engage the parking brake.
2. Connect Clamps аркылуу Jump Starterге өтүңүз: Акылдуу кошкучтун көк сайгычын сайыңызamps into the jump starting port on the jump starter unit. Ensure it is fully inserted. The indicator light on the clamps should flash green and red, indicating it's ready.
3. Connect ClampБатареяга:
   • туташтыруу КЫЗЫЛ (+) clamp унаанын аккумуляторунун оң (+) терминалына.
   • туташтыруу КАРА (-) clamp унаанын аккумуляторунун терс (-) терминалына.
   If the connection is correct, the indicator light on the clamps will turn solid green. If it flashes red or beeps, check for reverse polarity or short circuit and correct the connection.
4. Унааны баштоо: Return to the vehicle and start the engine within 30 seconds.
5. Clamps: Кыймылдаткыч ишке киргенден кийин, дароо клапанды алып салыңызamps from the vehicle battery, then disconnect the clampсекирүүчү стартер блогунан s.

Figure 5: Step-by-step guide for jump starting a vehicle.

6.2. Power Bank катары колдонуу

Стартер USB чыгаруу порттору аркылуу ар кандай электрондук түзүлүштөрдү кубаттай алат.

1. Түзмөгүңүздүн USB кубаттоочу кабелин стартердеги USB чыгаруу портторунун бирине туташтырыңыз.
2. Connect the other end of the cable to your electronic device (e.g., smartphone, tablet, Bluetooth speaker).
3. The jump starter will automatically begin charging your device. The QC3.0 port offers faster charging for compatible devices.

Figure 6: The jump starter's power bank functionality and EC5 adapter use.

6.3. LED жарыгын колдонуу

The built-in LED light offers multiple modes for different situations.

1. Press and hold the power button for 3 seconds to turn on the LED light (Torch mode).
2. Press the power button briefly to cycle through the modes: Torch → SOS → Quick Flash → Blue & Red Flash → Off.
3. Press and hold the power button again for 3 seconds to turn off the LED light from any mode.

Figure 7: The multi-function LED light in operation, illustrating its various modes.

7. Техникалык тейлөө

Proper maintenance ensures the longevity and optimal performance of your jump starter.

• Толуктоо: Recharge the unit after each use. If not used frequently, recharge every 3-6 months to prevent deep discharge and extend battery life.
• Тазалоо: Агрегатты жумшак, кургак чүпүрөк менен сүртүңүз. Катуу химиялык заттарды же абразивдүү тазалагычтарды колдонбоңуз.
• Сактагыч: Store the jump starter in a cool, dry place, away from direct sunlight, moisture, and extreme temperatures. Keep it in its provided storage case for protection.
• Батареяга кам көрүү: The internal lithium-ion battery is not user-replaceable. Do not attempt to open the unit.

8. Кыйынчылыктарды

If you encounter issues with your FLYLINKTECH Car Jump Starter, refer to the following common problems and solutions:

9. Техникалык шарттар

Эскертүү: Техникалык мүнөздөмөлөр эскертүүсүз өзгөртүлүшү мүмкүн.

10. Кепилдик жана колдоо

FLYLINKTECH products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official FLYLINKTECH webсайт.

When contacting support, please have your product model number (CF600) and purchase details readily available.