Introduction
The Mopeka Pro Check Sensor is an advanced wireless device designed to accurately measure the liquid propane, butane, and other fuel levels in your tank. This sensor utilizes ultrasonic technology and connects to your mobile device via Bluetooth, providing real-time updates through the free "Tank Check" app. It is suitable for a wide range of applications, including BBQ grills, RVs, food trucks, and holiday homes.

Figure 1: Mopeka Pro Check Sensor, its packaging, and the accompanying mobile application interface.
Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:
- Wireless connectivity to mobile devices for real-time level monitoring.
- Easy magnetic attachment to the underside of propane tanks.
- Enhanced ultrasonic sensing for high accuracy.
- Integrated temperature sensor and tank "bubble level" for precise readings.
- Long-lasting battery life (approximately 2 years) with adjustable update rates.
- Compatibility with various tank sizes from 20lb to 120 gallon or 420lb capacity.
- Free "Tank Check" mobile app available on Apple and Google Play stores.

Figure 2: ашыкview of the Mopeka Pro Check Sensor's easy installation and advanced features.
Орнотуу колдонмосу
Follow these steps to set up your Mopeka Pro Check Sensor:
Колдонмону жүктөп алыңыз: Download the free "Tank Check" app from the Apple App Store or Google Play Store on your mobile device.

Figure 3: Download the "Tank Check" app from your device's app store.
Install Spacers (if needed): If your tank has a recessed bottom or uneven surface, attach the provided metal spacers to the base of your propane tank. These spacers ensure proper clearance and optimal sensor performance. Tap them gently into place with a rubber mallet if necessary.

Figure 4: Illustration of spacer installation and sensor placement on the tank bottom.
Диэлектрик майын колдонуу: Apply a generous amount of the provided dielectric grease to the black sonar rubber circle located on the back of the sensor. This grease is crucial for ensuring accurate readings and proper contact between the sensor and the tank.
Sync the Sensor: Press and hold the "SYNC" button on your Mopeka Pro Check Sensor for 5-10 seconds. This will awaken the sensor and allow it to pair with the "Tank Check" app. Open the app and select "New LPG Device" to connect.
Сенсорду бекитүү: Magnetically attach the sensor to the base of your propane tank. Ensure it is centered and flat against the tank bottom for the most accurate reading. The app's "Sensor Position" and "Bubble-Level" functions can assist with alignment.
Configure Tank Size: In the "Tank Check" app, input your tank size from the dropdown menu. For custom tanks or sizes not listed, use the "Arbitrary" selection and enter your tank's exact specifications (gallons/pounds and diameter).
Жайгаштырууну ырастоо: After attaching the sensor, open the app and navigate to the "Sensor Position" section. The app will provide a visual guide to help you confirm that the sensor is positioned correctly and flat on the tank bottom. Adjust as needed until the app indicates optimal alignment.
Иштөө нускамалары
Once your Mopeka Pro Check Sensor is set up, monitoring your tank levels is simple:
реалдуу убакыт мониторинг: Open the "Tank Check" app on your smartphone or tablet to view the current propane level. The app provides real-time updates, allowing you to know exactly how much fuel remains.

Figure 5: Monitor your propane levels conveniently from your mobile device.
Ыңгайлаштырылган ойготкучтар: Set programmable alarms within the app to receive notifications when your tank level drops below a certain threshold, ensuring you never unexpectedly run out of gas.
Multiple Tanks: The "Tank Check" app supports an unlimited number of tanks and sensors, making it ideal for users with multiple propane tanks.
Алыстан кирүү (милдеттүү эмес): For remote monitoring beyond Bluetooth range, the Mopeka Wifi Bridge (sold separately) can be used to access your tank data from anywhere.
Техникалык тейлөө
Батареяны алмаштыруу: The Mopeka Pro Check Sensor uses a CR2032 coin/watch battery. The battery life is approximately 2 years, but can be extended by adjusting the update rate in the app. When the battery is low, replace it promptly to ensure continuous operation.

Figure 6: The sensor features improved battery life, lasting up to 2 years.
Тазалоо: Periodically clean the sensor and the tank bottom where it attaches to ensure optimal contact and accurate readings. Use a soft, damp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
Сактагыч: If storing the sensor for an extended period, remove the battery to prevent drainage and potential damage.
Проблемаларды чечүү
If you encounter issues with your Mopeka Pro Check Sensor, consider the following:
Sensor Not Syncing:
- Ensure the sensor is awake by pressing the SYNC button 5 times in a row.
- Check the battery. A dead battery is a common cause. Replace the CR2032 battery if necessary.
- Ensure Bluetooth is enabled on your mobile device and the device is within range of the sensor.
- Try restarting the app and your mobile device.
Туура эмес окуулар:
- Verify that the sensor is centered and flat on the tank bottom. Use the "Sensor Position" feature in the app to check alignment.
- Ensure sufficient dielectric grease is applied to the sonar rubber circle. A thin, even layer is crucial for good acoustic coupling.
- Check for any debris or rust on the tank bottom that might interfere with the sensor's contact.
- Confirm that the correct tank size and type are selected in the app settings.
Колдонмо маселелери:
- Ensure your "Tank Check" app is updated to the latest version.
- If experiencing issues with account setup or verification, check your email's spam folder for verification emails.
- For persistent app problems, try reinstalling the app.
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | Mopeka |
| Модел | M1017010 (Pro Check Sensor) |
| Стиль | Pro |
| Power Source | Батарея менен иштейт |
| Түс | Боз |
| Продукциянын өлчөмдөрү | 0.33"D x 2.87"W x 2.87"H |
| Ойготкуч | Audible (via app) |
| Сенсор түрү | УЗИ |
| Материал | Пластик |
| Элемент Салмагы | 2.08 унция |
| Келип чыккан өлкө | Кытай |
| Батареялар талап кылынат | 1 литий-металл батареясы (CR2032), камтылган |
| Батареянын орточо иштөө мөөнөтү | 2 жыл |
| Камтылган компоненттер | 1 Sensor, 1 Grease Packet, 3 Metal Spacers |
| Танк шайкештиги | 20lb to 120 gallon or 420lb capacity (most standard and custom LPG tanks) |
| Танктын багыты | Горизонталдык & Тик |
| Иштөө температурасы диапазону | -50°тан 60°Cге чейин (-55°тан 140°Fге чейин) |
Кепилдик жана колдоо
The Mopeka Pro Check Sensor comes with a 1 жылдык өндүрүүчү кепилдик when purchased directly from Mopeka. For detailed warranty information, product support, or technical assistance, please refer to the official Mopeka webсайтка же кардарларды тейлөөгө кайрылыңыз.
Official Mopeka Webсайт: www.mopeka.com





