SMACO PCP Air Compressor (Model Heap-01) User Manual

1. Коопсуздук боюнча маанилүү маалымат

Please read this manual thoroughly before operating the SMACO PCP Air Compressor. Failure to follow these instructions may result in serious injury or property damage. Keep this manual for future reference.

• Жаш чектөө: This product is intended for use by individuals over 18 years old.
• Электр коопсуздугу: Ensure the power source matches the compressor's requirements (12V DC or 110V-220V AC). Always connect to a grounded outlet when using AC power. Do not operate with damaged cords or plugs.
• Вентиляция: Operate the compressor in a well-ventilated area to prevent overheating. Avoid enclosed spaces.
• Басым чектери: Never exceed the maximum operating pressure of 4500 PSI (30 MPa / 300 Bar). Over-pressurizing tanks can cause explosions.
• Муздатуу цикли: The compressor requires a cool-down period. Do not operate continuously for more than 25 minutes. Allow 10-15 minutes for cooling after each 25-minute cycle.
• Moisture and Oil: This is an oil-free and water-free compressor. Do not add oil or water. Ensure the built-in oil-moisture filter is properly maintained.
• Байланыштары: Ensure all connections are secure before operation. The inflatable interface diameter is 8mm.
• Көзөмөл: Although the unit has an auto-shutoff feature, it is recommended to monitor the inflation process.
• Ысык беттер: The compressor and hose can become hot during operation. Avoid direct contact.

2. Продукт бүтүп калдыview

2.1 Негизги өзгөчөлүктөрү

• Oil-Free & Water-Free Design: Features built-in high-power fans for efficient cooling, eliminating the need for external water pumps or oil.
• Pressure-Set & Auto-Shutoff: Set your desired pressure, and the compressor will automatically stop when reached.
• Fast Inflating Speed: Engine speed up to 2700r/min, air output 11L/min. Inflates a 0.5L container from 0 to 3000 PSI in approximately 11 minutes.
• Кош кубаттуулук мүмкүнчүлүгү: Operates on 12V DC from a car battery or 110V-220V AC household power.
• Жеңил жана портативдик: Weighs approximately 21 lbs with compact dimensions (9.6"L x 5.6"W x 10"H).

2.2 Компоненттер жана башкаруу элементтери

Familiarize yourself with the main components of your SMACO PCP Air Compressor.

Figure 1: SMACO PCP Air Compressor and Accessories. This image displays the SMACO PCP Air Compressor unit along with its various accessories, including connection hoses, power cables, spare O-rings, and tools for maintenance.

Figure 2: Compressor Features Diagram. An illustrative diagram pointing out the main functional parts of the compressor, such as the adjustable voltage switch, pressure gauge, built-in oil moisture filter, wire spool design for cables, pressure valve, power switch, and safety valve.

• Басым өлчөгүч: Displays real-time pressure and allows setting target pressure.
• Кан чыгаруу клапаны: Used to release residual pressure after inflation.
• Start/Off Buttons: Controls the compressor's operation.
• Power Switch (I/O/II): Selects DC (I) or AC (II) power mode.
• Кубат киргизүү порттору: For 12V DC (car battery clamps) and 110V-220V AC (standard power cord).
• Инфляциялык шланг: Connects the compressor to the tank.
• Коопсуздук клапаны: An explosion-proof disc designed to release pressure if it exceeds safe limits.

3. Орнотуу колдонмосу

3.1 Таңгактан чыгаруу жана текшерүү

1. Бардык компоненттерди таңгактан кылдаттык менен алып салыңыз.
2. Inspect the compressor and accessories for any signs of damage during shipping. Contact customer support if any damage is found.
3. Көрсөтүлгөн бардык аксессуарлардын бар экенин текшериңиз.

3.2 Баштапкы байланыштар

Before operating, ensure proper connections for power and inflation.

Figure 3: Adjustable Gauge, Pressure Relief, and Safety Valve. Detailed images showing the adjustable pressure gauge for setting desired pressure, the pressure relief valve that automatically exhausts air when peak pressure is reached, and the safety valve with an explosion-proof disc.

1. Connect the Inflation Hose: Securely attach the inflation hose to the compressor's output port and to the tank you intend to fill. Ensure a tight seal to prevent leaks.
2. Кубат булагын тандоо:
   • For AC Power (110V-220V): Plug the AC power cord into the compressor's AC input and then into a grounded wall outlet. The initial setting is typically for 110V AC.
   • For DC Power (12V Car Battery): кызыл cl туташтырууamp унааңыздын аккумуляторунун оң (+) терминалына жана кара түстөгүamp to the negative (-) terminal. Ensure your car engine is running to provide stable power and prevent battery drain.

Figure 4: Dual Power Options. This image demonstrates the dual power capability of the compressor, showing it connected to a car battery for outdoor use and plugged into a standard AC outlet for indoor operation.

4. Иштөө нускамалары

4.1 Операцияга чейинки текшерүү тизмеси

• Бардык байланыштар коопсуз экенин текшериңиз.
• Verify the tank's maximum pressure rating.
• Confirm the compressor is in a well-ventilated area.
• Close the bleed valve before starting inflation.

4.2 Инфляция процесси

1. Кубат режимин тандоо: Set the power switch to 'I' for DC (12V) or 'II' for AC (110V-220V).
2. Максаттуу басымды коюу: Rotate the pressure setting knob on the gauge to your desired inflation pressure. The machine will automatically stop when this pressure is reached.
3. Компрессорду ишке киргизүү: Press the 'START' button. The compressor will begin to operate, and the cooling fans will activate.
4. Прогресс мониторинги: Observe the real-time pressure on the gauge. Although auto-shutoff is present, it is good practice to monitor the process.
5. Автоматтык түрдө өчүрүү: The compressor will automatically stop filling when the preset pressure is achieved. The cooling fan will continue to run to dissipate heat.
6. Кол менен токтотуу: To stop the compressor manually at any time, press the 'OFF' button.
7. Чыгуу басымы: After inflation is complete and the compressor has stopped, slowly open the bleed valve to release any residual pressure in the hose before disconnecting.
8. Ажыратуу: Once pressure is fully released, disconnect the inflation hose from the tank and the compressor. Then, disconnect the power source.

4.3 Cooling Cycle

The compressor is designed with a duty cycle to prevent overheating. For optimal performance and longevity:

• Do not run the compressor for more than 25 мүнөт үзгүлтүксүз.
• Allow the compressor to cool down for 10-15 мүнөт after each 25-minute operation cycle. The cooling fan will continue to run during this period.

Figure 5: Fan Cooling System. A visual representation of the compressor's internal fan cooling system, highlighting its oil-free operation, active cooling fans, integrated oil-moisture filter, and overall durable construction. A note indicates a 25-minute run / 10-minute cool-down duty cycle.

5. Техникалык тейлөө

Regular maintenance ensures the longevity and reliable operation of your compressor.

5.1 Oil-Moisture Filter

• The compressor features a built-in oil-moisture filter. Periodically check and replace the filter elements as needed to ensure clean, dry air output.
• Refer to the included accessories for spare filter elements and instructions on replacement.

5.2 Жалпы кам көрүү жана сактоо

• Keep the compressor clean and free from dust and debris. Use a dry cloth for cleaning.
• Store the compressor in a cool, dry place, away from direct sunlight and moisture.
• Ensure power cables and hoses are neatly stored, utilizing the wire spool design if available.

6. Кыйынчылыктарды

If you encounter issues with your SMACO PCP Air Compressor, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact SMACO customer support.

7. Техникалык шарттар

Эскертүү: Техникалык мүнөздөмөлөр эскертүүсүз өзгөртүлүшү мүмкүн.

8. Кепилдик жана Кардарларды колдоо

SMACO products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official SMACO webсайт.

If you have any questions, require technical assistance, or need to report an issue, please contact SMACO customer support through the retailer where you purchased the product or via the contact information provided on the official SMACO webсайт.