1. Киришүү
This manual provides detailed instructions for the proper installation, operation, and maintenance of the Whadda WSAA2644 Automobile Interior Instrument. This device is designed to indicate ambient temperature conditions, specifically alerting the user when temperatures approach freezing point.
2. Продукт бүтүп калдыview
The Whadda WSAA2644 is an electronic circuit board designed to monitor temperature and provide a visual alert. It includes a temperature sensor, an LED indicator, and various electronic components mounted on a printed circuit board (PCB).
Figure 1: Whadda WSAA2644 Automobile Interior Instrument circuit board. This image displays the green printed circuit board (PCB) with various electronic components including capacitors, resistors, an integrated circuit (IC), a red LED, a potentiometer, and a white terminal block. A metallic temperature sensor with wires is connected to the terminal block.
Негизги компоненттер:
- Басма схемасы (PCB): The main board housing all electronic components.
- Температура сенсору: A reliable sensor with a mounting axle, designed to detect ambient temperature.
- LED Indicator (LD1): A red flashing LED that indicates temperatures near the freezing point.
- Интегралдык схема (IC): An LM324N operational amplifier, central to the temperature detection logic.
- Resistors and Capacitors: Standard electronic components for circuit operation.
- Потенциометр: For calibration or adjustment of the temperature threshold.
- Терминал блогу: For connecting the temperature sensor and power supply.
3. Орнотуу жана орнотуу
Careful installation is crucial for accurate operation. Ensure the vehicle's power is disconnected before beginning installation.
- Сенсорду орнотуу:
Identify a suitable location for the temperature sensor. This location should accurately reflect the ambient temperature you wish to monitor, typically outside the vehicle's cabin but protected from direct engine heat or road spray. The sensor includes a mounting axle for secure attachment.
- Сенсорду туташтыруу:
Connect the wires from the temperature sensor to the designated terminals on the circuit board's terminal block. Ensure correct polarity if specified in the circuit diagram (refer to the product's schematic if available).
- Кубат туташуу:
Connect the power supply (e.g., 12V DC from the vehicle's electrical system) to the appropriate terminals on the circuit board. Observe correct polarity to prevent damage to the device. The device is designed to operate in cold environments, as indicated by its intended use.
- Mounting the Circuit Board:
Secure the circuit board in a protected area within the vehicle's interior, away from moisture, extreme heat, or physical damage. Ensure the LED indicator is visible if it is intended for direct user observation.
4. Иштөө нускамалары
Once properly installed and powered, the Whadda WSAA2644 operates automatically.
- Кадимки операция: When the ambient temperature is above the freezing point threshold, the LED indicator (LD1) will remain off or in a non-alert state.
- Freezing Point Alert: This set uses a flashing LED to indicate a temperature near the freezing point. During this point, the LED light will light up continuously. This indicates that the temperature has reached or fallen below a critical threshold, warning of potential ice formation.
- Калибрлөө (эгер бар болсо): If the circuit includes a potentiometer for adjustment, it can be used to fine-tune the temperature threshold at which the LED alert activates. Refer to the circuit diagram or specific calibration instructions for precise adjustment.
5. Техникалык тейлөө
The Whadda WSAA2644 is designed for low maintenance. Follow these guidelines to ensure longevity and reliable operation:
- Үзгүлтүксүз текшерүү: Periodically check the sensor and circuit board for any signs of physical damage, corrosion, or loose connections.
- Тазалоо: Keep the circuit board and sensor free from dust, dirt, and moisture. Use a soft, dry cloth for cleaning. Do not use liquid cleaners directly on the electronic components.
- Сенсордун жайгашуусу: Ensure the temperature sensor remains in its optimal position and is not obstructed, which could affect its accuracy.
6. Кыйынчылыктарды
Эгер аппарат күтүлгөндөй иштебесе, төмөндөгүлөрдү эске алыңыз:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| LED not lighting up when temperature is low. |
|
|
| LED always on or flashing erratically. |
|
|
| Температураны туура эмес көрсөткүчтөр. |
|
|
7. Техникалык шарттар
- Модел: WSAA2644
- Бренд: Whadda
- Функциясы: Automobile Interior Instrument (Freezing Point Indicator)
- Көрсөткүч: Flashing LED for freezing point alert
- Сенсор: Reliable temperature sensor with mounting axle
- Элемент Салмагы: 12 Kilograms (Note: This weight seems unusually high for a circuit board and sensor. Please verify actual product weight if this is a kit or includes other components.)
- Пакеттин өлчөмдөрү: 28 x 23 x 22 см
- Ассамблея талап кылынат: No (implies it's a pre-assembled module)
- Биринчи жеткиликтүү: 19 август 2021 жыл
8. Кепилдик жана колдоо
For warranty information or technical support, please refer to the documentation provided with your purchase or contact Whadda customer service directly. Keep your purchase receipt as proof of purchase.
For further assistance, visit the official Whadda webсайтка же алардын колдоо каналдарына кайрылыңыз.
