Brandt AS0040316 Washing Machine Drain Pump Instruction Manual

1. Киришүү

This instruction manual provides essential information for the proper installation, operation, and maintenance of the Brandt AS0040316 washing machine drain pump. This component is designed to effectively remove water from your washing machine during the drain cycle. Please read this manual thoroughly before attempting any installation or repair to ensure safety and optimal performance.

2. Коопсуздук маалыматы

WARNING: Risk of Electric Shock and Water Damage.

• Always disconnect the washing machine from the main power supply before attempting any installation, maintenance, or repair.
• Ensure all water is drained from the washing machine before accessing the drain pump.
• Installation should ideally be performed by a qualified technician. If you are performing the installation yourself, ensure you have the necessary tools and technical knowledge.
• Wear appropriate personal protective equipment (PPE), such as gloves, during installation.
• After installation, check for any leaks before fully restoring power and operating the appliance.

3. Продукт бүтүп калдыview

The Brandt AS0040316 drain pump is a critical component responsible for expelling water from your washing machine. It consists of an electric motor and a pump housing with inlet and outlet connections.

Сүрөт 1: Бүттүview of the Brandt AS0040316 Washing Machine Drain Pump. The image shows the pump assembly with its motor and housing, including electrical connections and water inlet/outlet ports.

4. Шайкештик

This drain pump is compatible with various washing machine models from Brandt and Vedette. Please verify your appliance's model number against the list below to ensure compatibility. If your model is not listed, please contact the manufacturer or seller for assistance.

Compatible Brandt Models:

• BWF5Q2YCW
• BWF47TCB
• BWF5843CW - BWF5843CW2
• BWF8140EA - BWF8140EA/1
• BWF506DWE - BWF506DWE/01
• BWF524DWE - BWF524DWE/01
• BWF744LW - BWF744LW1
• BWF844LW - BWF844LW1
• BWW8514T - BWW8514T/01
• BWF47TWW - BWF47TWW2
• BWF47TCS - BWF47TCS2
• BWF574WWE - BWF574WWE2
• BWF582WWE - BWF582WWE2
• BWF5843CS - BWF5843CS2
• BWF58TCR - BWF58TCR2
• BWF7120EA - BWF7120EA/1
• BWF844QLW - BWF844QLW1

Compatible Vedette Models:

• VLF722W2

5. Орнотуу боюнча колдонмо

The following steps provide a general guide for replacing a washing machine drain pump. Specific procedures may vary depending on your washing machine model. Refer to your washing machine's service manual for detailed instructions.

1. Даярдоо:
   • Disconnect the washing machine from the electrical outlet.
   • Кир жуугуч машинага суу берүүнү өчүрүңүз.
   • Drain any remaining water from the machine. You may need to use a bucket and towels.
   • Move the washing machine to an area with sufficient space to work.
2. Accessing the Drain Pump:
   • Depending on your model, the drain pump may be accessible from the front (behind a kick panel), rear, or by tilting the machine.
   • Remove any panels or covers necessary to gain access to the pump.
3. Removing the Old Pump:
   • Locate the drain pump. It will have hoses connected to it and electrical wiring.
   • Place towels underneath to catch any residual water.
   • Disconnect the hoses from the pump. You may need pliers to release clamps.
   • Disconnect the electrical wiring. Note the orientation or take a photo for reassembly.
   • Unmount the pump from its housing or base. This usually involves unscrewing it or releasing клиптер.
4. Installing the New Pump:
   • Position the new Brandt AS0040316 drain pump in the same location as the old one.
   • Secure the pump to its mounting points.
   • Reconnect the electrical wiring, ensuring a secure connection.
   • Reconnect the hoses to the pump, securing them with clamps. Ensure hoses are properly seated to prevent leaks.
5. Кайра чогултуу жана сыноо:
   • Алынып салынган панелдерди же капкактарды алмаштырыңыз.
   • Суу менен камсыздоону кайра туташтырып, агып кетүүлөрдү текшериңиз.
   • Кир жуугуч машинаны кайра электр розеткасына сайыңыз.
   • Run a short drain cycle or a rinse and spin cycle to test the new pump for proper operation and to check for any leaks.

6. Операция

The Brandt AS0040316 drain pump operates automatically as part of your washing machine's wash cycle. It activates during the drain and spin phases to remove water from the drum. No manual intervention is required for its operation once correctly installed.

7. Техникалык тейлөө

As a sealed unit, the drain pump itself requires minimal maintenance. However, regular checks of the washing machine's drain filter (if applicable) and drain hoses can help prevent issues that might affect the pump's performance or lifespan.

• Check Drain Filter: Many washing machines have a small filter near the drain pump that can collect lint, coins, or other debris. Refer to your washing machine's user manual for instructions on how to access and clean this filter regularly.
• Шлангдарды текшерүү: Periodically check the drain hoses for kinks, blockages, or damage.

8. Кыйынчылыктарды

If your washing machine is experiencing draining issues after installing the new pump, consider the following common problems:

Эгерде көйгөйдү чечүү кадамдары көйгөйдү чечпесе, квалификациялуу тиричилик техникасы боюнча адиске кайрылуу сунушталат.

9. Техникалык шарттар

10. Кепилдик жана колдоо

For warranty information or technical support regarding your Brandt AS0040316 drain pump, please refer to the documentation provided with your purchase or contact the seller directly. As a specialist in spare parts since 1984, the seller (Groupe Dragon) can provide expert advice and assistance.

It is recommended to have your appliance's serial number and model number ready when contacting support.