HUNSN BM14 Fanless Mini PC Колдонуучунун колдонмосу

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of the HUNSN BM14 Fanless Mini PC. The BM14 is a compact, high-performance barebone system designed for various applications, from desktop computing to server tasks. As a barebone unit, it requires the installation of system memory (RAM), a storage drive (SSD/HDD), and an operating system to become fully functional.

Please read this manual thoroughly before proceeding with installation and operation to ensure proper use and to maximize the lifespan of your device.

Пакеттин мазмуну

Төмөндө тизмеленген нерселердин баары пакетиңизде бар экенин текшериңиз:

• HUNSN BM14 Mini PC unit
• Кубат берүүчү адаптер
• Электр зымы
• Вертикалдуу стенд
• WiFi antennas (2 units)
• Кепилдик картасы

If any items are missing or damaged, please contact your vendor or HUNSN customer support immediately.

Техникалык шарттар

Орнотуу нускамалары

The HUNSN BM14 is a barebone system. Follow these steps to install the necessary components and prepare your Mini PC for first use.

1. RAM (эс тутум) орнотуу

1. Өчүрүү: Ensure the Mini PC is disconnected from the power source.
2. Ачык шасси: Carefully open the chassis of the Mini PC. Refer to the product diagram for screw locations.
3. Locate SODIMM Slots: Identify the two SODIMM DDR4-3200 memory slots on the motherboard.
4. RAM салыңыз: Align the notch on the RAM module with the notch in the slot. Insert the module at a 45-degree angle and push down firmly until the clips on both sides snap into place.
5. Шассиди жабуу: Securely close the chassis.

2. Installing Storage Drives

The BM14 supports mSATA SSD, M.2 2280 NVME SSD, and 2.5-inch SATA SSD/HDD.

1. Power Off and Open Chassis: Ensure the Mini PC is powered off and the chassis is open.
2. Install M.2 NVME SSD:
   • Locate the M.2 2280 slot.
   • M.2 SSDди уячага бурч менен салыңыз.
   • Gently push down and secure it with the provided screw.
3. Install mSATA SSD:
   • Locate the mSATA slot.
   • Insert the mSATA SSD into the slot.
   • Берилген бурамалар менен бекитиңиз.
4. 2.5 дюймдук SATA SSD/HDD орнотуу:
   • Mount the 2.5-inch drive into the designated bay.
   • SATA маалыматтарын жана электр кабелдерин дискке жана энелик платага туташтырыңыз.
5. Шассиди жабуу: Securely close the chassis after installation.

3. Перифериялык түзүлүштөрдү туташтыруу

Connect your display, keyboard, mouse, and other devices.

• Дисплей: Connect your monitor to either the HDMI or DisplayPort (DP) output. For dual display, use both ports.
• USB түзмөктөрү: Plug in your keyboard, mouse, and other USB peripherals into the available USB 2.0 or USB 3.0 ports.
• Тармак: For wired internet, connect an Ethernet cable to the LAN port. For wireless, attach the provided WiFi antennas to the connectors on the back panel.
• Аудио: Connect speakers or headphones to the "Spk" port and a microphone to the "Mic" port if needed.
• Күч: Connect the power adapter to the "DC IN" port on the Mini PC, then plug the power cord into an electrical outlet.

Image: Rear panel of the HUNSN BM14 Mini PC, illustrating the DP, HDMI, USB, LAN, and audio ports.

Image: Front panel of the HUNSN BM14 Mini PC, featuring USB ports and the power button.

4. Операциялық системаны орнотуу

After installing RAM and storage, you will need to install an operating system.

1. Prepare Installation Media: Create a bootable USB drive with your preferred operating system (e.g., Windows 10/11, Linux Ubuntu).
2. Boot from USB: Power on the Mini PC and repeatedly press the designated key (usually Del or F2) to enter the BIOS/UEFI settings. Configure the boot order to prioritize your USB installation media.
3. ОС орнотуу: Follow the on-screen instructions to install the operating system onto your installed storage drive.
4. Драйверлерди орнотуу: After OS installation, install any necessary drivers for optimal performance.

Иштөө нускамалары

Күйгүзүү/өчүрүү

• Күйгүзүү: Press the power button located on the front panel. The power indicator light will illuminate.
• Өчүрүү:
  • Стандарттык өчүрүү: Use the operating system's shutdown function.
  • Мажбурлап өчүрүү: Press and hold the power button for 5-7 seconds until the device powers off. Use this only when the system is unresponsive.
• Restore AC Power Loss: The BM14 supports automatic power-on after a power failure. This feature can usually be configured in the BIOS/UEFI settings.

Дисплей конфигурациясы

The Mini PC supports single or dual display setups using the HDMI and DisplayPort (DP) outputs.

• Жалгыз дисплей: Connect your monitor to either the HDMI or DP port.
• Кош дисплей: Connect two monitors, one to the HDMI port and one to the DP port. The system supports simultaneous display or independent displays. Configure display settings within your operating system.
• DP to VGA: The DisplayPort supports direct conversion to VGA using an appropriate adapter. Note: DP to HDMI conversion is not supported.
• Чечим: HDMI supports up to 4K (4096x2304) at 60Hz. DP supports up to 4K (7680x4320) at 60Hz.

Network Connectivity

• Зымдуу LAN: Connect an Ethernet cable to the RJ45 LAN port for a stable wired network connection.
• Зымсыз WiFi: Ensure antennas are attached and the WiFi module is enabled in the operating system. Configure your wireless network connection through your operating system's network settings. The device supports 802.11ac on both 2.4GHz and 5GHz bands.
• Bluetooth: The integrated Bluetooth 4.0/4.2 allows connection to compatible wireless devices such as keyboards, mice, and audio peripherals.

Техникалык тейлөө

The HUNSN BM14 Mini PC features a fanless design, which significantly reduces maintenance requirements and ensures silent operation.

• Тазалоо: Periodically clean the exterior of the Mini PC with a soft, dry cloth to remove dust. Avoid using liquid cleaners directly on the device. Ensure the cooling fins are free from obstructions to maintain optimal heat dissipation.
• Курчап турган чөйрө: Operate the Mini PC within the specified temperature and humidity ranges (0°C~70°C, 10%~90% non-condensing). Avoid placing the device in direct sunlight, near heat sources, or in excessively dusty or humid environments.
• Программалык камсыздоо жаңыртуулары: Системанын туруктуулугун жана коопсуздугун камсыз кылуу үчүн операциялык тутумуңузду жана драйверлериңизди үзгүлтүксүз жаңыртып туруңуз.

Проблемаларды чечүү

If you encounter issues with your HUNSN BM14 Mini PC, refer to the following common troubleshooting steps:

• Кубат жок:
  • Ensure the power adapter is securely connected to both the Mini PC and a working electrical outlet.
  • Verify the power cord is not damaged.
  • Розетканы башка аспап менен текшериңиз.
• Дисплей чыгышы жок:
  • Check that the monitor is powered on and the video cable (HDMI/DP) is securely connected to both the Mini PC and the monitor.
  • Мониторуңузда туура киргизүү булагы тандалганын текшериңиз.
  • If using dual displays, try connecting only one monitor at a time to isolate the issue.
  • RAM модулдарынын туура орнотулгандыгын текшериңиз.
• System Not Booting / OS Issues:
  • Confirm that the storage drive (SSD/HDD) is properly installed and connected.
  • Check BIOS/UEFI settings to ensure the boot order is correct and the storage drive is detected.
  • If the operating system is corrupted, you may need to reinstall it.
• Тармак туташуусу жок:
  • For wired LAN, ensure the Ethernet cable is connected and the router/modem is working.
  • For WiFi, ensure antennas are attached and the WiFi module is enabled in the operating system. Check network settings and password.
• Системанын туруксуздугу / кыйроолор:
  • Ensure RAM and storage drives are compatible and correctly installed.
  • Update all drivers and the operating system to the latest versions.
  • Monitor system temperatures, although the fanless design minimizes overheating risks under normal loads.

If these steps do not resolve your issue, please consult the HUNSN support webсайтка же кардарларды тейлөөгө кайрылыңыз.

Кепилдик жана колдоо

Your HUNSN BM14 Mini PC comes with a warranty. Please refer to the included warranty card for detailed terms, conditions, and duration of coverage.

For technical support, driver downloads, or further assistance, please visit the official HUNSN website or contact their customer service department. Keep your product model number (BM14) and purchase information readily available when seeking support.