1. Киришүү
Thank you for choosing the IMEX ETNA Wall-Mounted Basin Faucet. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new faucet. Please read this manual thoroughly before installation and keep it for future reference.
The IMEX ETNA faucet is a high-quality mixer designed for wall mounting in basins or bathtubs. It is constructed from durable S316 stainless steel, offering superior resistance to corrosion and high temperatures, ensuring long-lasting performance and a sleek aesthetic.
2. Коопсуздук маалыматы
- Always ensure that installation is performed by a qualified professional to prevent damage or injury.
- Кандайдыр бир монтаждоо же тейлөө иштерин баштоодон мурун негизги суу менен камсыздоону өчүрүңүз.
- Verify that all connections are secure and watertight to prevent leaks.
- Крандын бетине абразивдүү тазалагычтарды же катуу химиялык заттарды колдонбоңуз, анткени бул финишке зыян келтириши мүмкүн.
- Protect the product from extreme temperatures and direct impact.
- The S316 stainless steel material is highly resistant to corrosion, but proper care is still essential for maintaining its appearance.
3. Продукт бүтүп калдыview
The IMEX ETNA faucet features a minimalist design with two independent components: the spout and the mixer handle. This allows for flexible installation and a clean, integrated look.
Сүрөт 3.1: Алдыңкы view of the IMEX ETNA wall-mounted faucet, showing the curved spout and the separate mixer handle.
Figure 3.2: The IMEX ETNA faucet installed above a modern white basin, demonstrating its wall-mounted application and sleek appearance.
Компоненттери:
- Чычкан: The water outlet, designed for wall mounting.
- Mixer Handle: Controls water temperature and flow.
- Монтаждоочу аппаратура: Necessary components for secure wall installation.
The faucet's dimensions are approximately 21.9 cm (8.6 inches) in length for the spout and 8 cm (3.1 inches) in diameter at its base. The finish is a natural chrome-like appearance derived from the S316 stainless steel material.
4. Орнотуу жана орнотуу
This faucet is designed for wall-mounted installation. No special registration box is required for its setup, simplifying the process. Professional installation is highly recommended.
Куралдар жана материалдар (кошумча эмес):
- Жөнгө салынуучу ачкыч
- Screwdriver
- Өлчөө лентасы
- Деңгээл
- Бургулоо
- Герметик лента (Тефлон лентасы)
Орнотуу кадамдары:
- Дубалды даярдоо: Ensure the wall surface is clean, dry, and structurally sound. Mark the desired positions for the spout and mixer handle, considering the plumbing connections.
- Install Rough-in Plumbing: Connect the hot and cold water lines to the appropriate rough-in valves within the wall. Ensure these are securely fastened and leak-free.
- Мыкты тоо: Insert the spout assembly into its designated wall opening. Secure it firmly using the provided mounting hardware. Ensure it is level and properly aligned.
- Mount the Mixer Handle: Insert the mixer handle assembly into its wall opening. Connect it to the hot and cold water lines and secure it with the mounting hardware.
- Туташуу компоненттери: Ensure all internal connections between the spout and mixer are correctly made according to plumbing standards.
- Агышуу үчүн сыноо: Slowly turn on the main water supply and check all connections for any signs of leaks. Tighten connections as necessary.
- Акыркы текшерүү: Verify proper water flow and temperature control.
Figure 4.1: Technical drawing illustrating the dimensions and internal structure of the IMEX ETNA faucet components for installation reference.
4.2-сүрөт: үстүнкү view of the IMEX ETNA faucet installed with a basin, providing a perspective on its spatial requirements and design integration.
5. Иштөө нускамалары
The IMEX ETNA faucet is operated using a single mixer handle, allowing for easy control of both water temperature and flow.
- Күйгүзүү/өчүрүү: Lift the handle to turn on the water flow. Push it down to turn off the water.
- Агымды жөндөө: Туткасын канчалык алыс көтөрсөңүз, суунун агымы ошончолук көп болот.
- Температураны жөндөө: Swivel the handle left for hot water and right for cold water. The central position provides mixed water.
- Сууну үнөмдөөчү өзгөчөлүк: This faucet is equipped with a water-saving system. You may notice a slight resistance when lifting the handle past a certain point, indicating a reduced flow rate for water conservation. Pushing past this point will provide full flow.
6. Техникалык тейлөө жана кам көрүү
Proper maintenance will ensure the longevity and aesthetic appeal of your IMEX ETNA faucet.
- үзгүлтүксүз тазалоо: Clean the faucet regularly with a soft cloth and mild soap or a non-abrasive liquid cleaner. Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
- Катуу тазалагычтардан качыңыз: Do NOT use abrasive cleaners, scouring pads, ammonia-based cleaners, bleach, or any cleaners containing alcohol or organic solvents, as these can damage the stainless steel finish.
- Пайдалуу кендер: For hard water areas, mineral deposits may accumulate. Use a solution of vinegar and water (1:1 ratio) applied with a soft cloth, then rinse and dry.
- Агышууларды текшерүү: Periodically check all connections for any signs of leaks. Address any leaks promptly to prevent water damage.
7. Кыйынчылыктарды
Эгерде сиз краныңыз менен көйгөйлөргө туш болсоңуз, төмөнкү кеңири таралган көйгөйлөрдү жана чечимдерди караңыз:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Төмөн суу агымы | Clogged aerator; partially closed shut-off valve; low water pressure. | Clean or replace aerator; ensure shut-off valves are fully open; consult a plumber for water pressure issues. |
| Spout'тан агып жатат | Эскирген картридж; картридждеги таштандылар. | Replace the cartridge; clean the cartridge. Professional assistance may be required. |
| Базадан/туташуулардан агып кетүү | Loose connections; worn seals/O-rings. | Tighten connections; replace seals/O-rings. |
| Температураны тууралоо кыйынчылыгы | Cartridge issue; unbalanced water pressure. | Inspect or replace cartridge; check water supply lines for blockages. |
If the problem persists after attempting these solutions, please contact a qualified plumber or the manufacturer's customer support.
8. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | IMEX (MICE COLLECTION) |
| Модел | ETNA GLT023/AC |
| Сунушталган колдонуу | Basin or Bathtub |
| Монтаж түрү | Дубалга орнотуу |
| Аяктоо түрү | Дат баспаган болот |
| Материал | S316 Stainless Steel |
| Түс | Dark S316 Stainless Steel (Chrome-like) |
| Туткалардын саны | 1 |
| Камтылган компоненттер | Mixer Faucet (Spout and Mixer Handle) |
| Талап кылынган тешиктердин саны | 1 (for mixer handle, spout is separate) |
| Өзгөчө өзгөчөлүк | Water-Saving System |
| Сөөктүн узундугу | 21.9 см (болжол менен 8.6 дюйм) |
| Негизги диаметри | 8 см (болжол менен 3.1 дюйм) |
9. Кепилдик жана колдоо
For information regarding the product warranty, please refer to the terms and conditions provided at the time of purchase or contact your retailer. Typically, products are covered against manufacturing defects for a specified period.
If you require technical assistance, have questions about installation, or need to report a defect, please contact the seller or manufacturer directly. Keep your purchase receipt and product model number (GLT023/AC) handy when contacting support.
