Wireless Weather Station User Manual

1. Киришүү

Сатып алганыңыз үчүн рахматasing the sparoma Wireless Weather Station. This device provides comprehensive indoor and outdoor environmental data, including temperature, humidity, weather forecasts, moon phase, and atmospheric pressure. It features a large, colorful LCD display for easy readability and an atomic clock for precise timekeeping. This manual will guide you through the setup, operation, and maintenance of your new weather station.

Image 1.1: The main display unit of the sparoma Wireless Weather Station.

2. Продукциянын өзгөчөлүктөрү

• Комплекстүү маалыматтарды көрсөтүү: Shows indoor/outdoor temperature and humidity (max/min), 12/24H calendar, moon phase, atmospheric pressure, and 6 weather forecast icons.
• Large Colorful HD Display: 7.5-inch screen for easy reading from various angles.
• Кеңейтилген берүү диапазону: Remote sensor transmits signals up to 200ft/60m (without obstacles) and supports up to 3 sensors (only one included).
• Кош кубат режимдери: Operates via DC power adapter or batteries (not included).
• Жөнгө салынуучу арткы жарык: 4 brightness levels and off mode when using DC power; 15-second backlight in battery mode.
• Так окуулар: Equipped with WWVB receiver for automatic self-calibration and high-sensitive sensors.
• Көп функциялуу ойготкуч: Includes buzzer and snooze mode.

Сүрөт 2.1: Бүттүview of the weather station's display, highlighting various data points like temperature, humidity, forecast, and time.

3. Орнотуу

3.1 Пакеттен чыгаруу жана компоненттер

Бардык компоненттерди таңгактан кылдаттык менен алып салыңыз. Сизде төмөнкү нерселер бар экенин текшериңиз:

• Негизги дисплей бирдиги
• Алыскы тышкы сенсор
• Кубаттуу адаптер
• Колдонуучунун Колдонмосу (бул документ)
• Mounting Hardware (for remote sensor)

3.2 Негизги блокту электр менен камсыздоо

The main unit can be powered by either the included DC power adapter or 3 x AAA batteries (not included).

1. DC кубаттуулугу: Insert the DC power adapter into the power jack on the back of the main unit and plug it into a standard wall outlet. The display will light up immediately.
2. Батарея кубаттуулугу: Open the battery compartment on the back of the main unit and insert 3 x AAA batteries, observing the correct polarity (+/-). The display will briefly light up and then dim to conserve power. Press the "LIGHT" button to illuminate the display for 15 seconds.

Note: For continuous backlight, DC power is recommended. Batteries serve as a backup in case of power outages.

Image 3.1: Illustration of the two power modes: DC power for continuous backlight and battery power for portability with temporary backlight.

3.3 Installing and Pairing the Remote Sensor

The remote sensor requires 2 x AA batteries (not included).

1. Open the battery compartment on the back of the remote sensor and insert 2 x AA batteries, observing the correct polarity (+/-).
2. Place the remote sensor within 1 meter (3 feet) of the main unit for initial pairing.
3. The main unit will automatically search for the remote sensor. The outdoor temperature and humidity readings should appear on the display within a few minutes. If not, press and hold the "CHANNEL" button on the main unit to initiate a manual search.
4. Once paired, choose a suitable outdoor location for the remote sensor. It should be protected from direct sunlight and precipitation for accurate readings. Ensure it is within the 200ft/60m transmission range of the main unit, with minimal obstacles.

Image 3.2: The main display unit alongside its remote outdoor sensor, illustrating the two primary components.

Image 3.3: Visual representation of the 200ft/60m wireless transmission range for the outdoor sensor, showing placement options.

3.4 Initial Settings (Time, Date, Units)

The weather station is equipped with a WWVB receiver for automatic time synchronization.

• Atomic Clock Synchronization: After powering on, the unit will attempt to receive the WWVB signal. This may take several hours, especially in areas with weak signals. Ensure the unit is placed away from electronic interference.
• Manual Time/Date Setting: If atomic synchronization is not desired or available, you can manually set the time and date using the buttons on the back of the unit (refer to the "Operating" section for button functions).
• Температура бирдиктери: Press the "°C/°F" button to switch between Celsius and Fahrenheit.

4. Иштөө нускамалары

4.1 Дисплейview

The large color display provides various pieces of information at a glance:

• Имараттын температурасы жана нымдуулугу: Ички чөйрөңүз үчүн учурдагы көрсөткүчтөр.
• Сырттагы температура жана нымдуулук: Алыстан сенсордон алынган учурдагы көрсөткүчтөр.
• Аба ырайы: Icons predicting the weather for the next 12-24 hours (Sunny, Cloudy, Overcast, Rainy, Heavy Rain, Snowy).
• Ай фазасы: Displays the current phase of the moon.
• Убакыт жана календарь: Учурдагы убакыт, жуманын күнү жана датасы.
• Атмосфералык басым: Current barometric pressure reading.
• Комфорт деңгээли: Indicates indoor comfort based on temperature and humidity (Humid, Good, Dry).

Image 4.1: The weather station's display showcasing the six different weather forecast icons.

4.2 Баскыч функциялары

The main unit has several buttons, typically located on the back or top, for various functions:

• MODE/SET: Press to cycle through display modes (e.g., time, alarm). Hold to enter setting mode for time, date, etc.
• ЖОГОРУ/+: In setting mode, increases values. Outside setting mode, may switch between max/min temperature/humidity.
• ТӨМӨН/-: Орнотуу режиминде, маанилерди азайтат.
• °C/°F: Цельсий жана Фаренгейт температура бирдиктери ортосунда которулат.
• КАНАЛ: Press to cycle through multiple outdoor sensors (if more than one is paired). Hold to initiate a manual search for outdoor sensors.
• ЖАРЫК/ЧЫКТЫРУ: Press to adjust backlight brightness (when DC powered) or activate 15-second backlight (when battery powered). When alarm sounds, press to activate snooze function.
• ЭСКЕРТҮҮ: чейин басыңыз view alarm time. Hold to set alarm time.

4.3 Арткы жарыкты тууралоо

The backlight behavior depends on the power source:

• DC кубаттуулугу: Press the "LIGHT" button repeatedly to cycle through 4 brightness levels (100%, 75%, 50%, 25%) and an off mode. The backlight will remain on continuously at the selected brightness.
• Батарея кубаттуулугу: The backlight will automatically turn off after 15 seconds to conserve battery life. Press the "LIGHT" button to temporarily illuminate the display for 15 seconds.

Image 4.2: Visual comparison of the weather station's display at various backlight brightness settings, from dim to bright.

4.4 Ойготкуч саат функциясы

Ойготкучту коюу үчүн:

1. Press and hold the "ALARM" button until the alarm time starts flashing.
2. Use the "UP/+" and "DOWN/-" buttons to adjust the hour. Press "ALARM" to confirm.
3. Use the "UP/+" and "DOWN/-" buttons to adjust the minute. Press "ALARM" to confirm and exit alarm setting mode.

When the alarm sounds, press the "LIGHT/SNOOZE" button to activate the snooze function for 5 minutes. To turn off the alarm, press any other button.

Image 4.3: The weather station serving as an alarm clock with snooze functionality, shown in a bedroom setting.

5. Техникалык тейлөө

5.1 Батареяны алмаштыруу

Replace batteries in both the main unit and the remote sensor when the low battery indicator appears on the display. Always replace all batteries at the same time with new ones of the same type.

• Негизги блок: 3 x AAA батарейкалар.
• Алыстан сенсор: 2 x AA батарейкалар.

5.2 Тазалоо

Дисплейди жана c блогун сүртүңүзasing жумшак менен, гamp cloth. Do not use abrasive cleaners or solvents, as they may damage the display or finish. Ensure no liquid enters the unit.

5.3 Сенсордун жайгашуусу

For optimal performance and accurate readings, ensure the remote sensor is:

• Placed in a shaded area, away from direct sunlight, which can cause artificially high temperature readings.
• Түз жамгырдан же кардан корголгон.
• Mounted vertically to allow for proper drainage.
• Within the specified transmission range of the main unit, minimizing large metal objects or thick walls between them.

6. Кыйынчылыктарды

7. Техникалык шарттар

8. Кепилдик жана колдоо

Кепилдик маалыматы же техникалык колдоо алуу үчүн өндүрүүчүгө же сатып алган жериңизге кайрылыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.

Өндүрүүчү: Putian Yijia Electronic Co.,Ltd
Бренд: спарома

For further assistance, you may visit the official sparoma store on Amazon: sparoma Store