Keyless2Go алмаштыруучу ачкычсыз кирүүчү алыстан иштетүүчү унаа ачкычынын фокусу боюнча колдонмо

Introduction

This manual provides comprehensive instructions for the Keyless2Go Replacement 5-Button Remote Start Car Key Fob and Uncut Transponder Ignition Car Key (B111). It covers product overview, compatibility, setup, programming, operation, maintenance, and troubleshooting to ensure proper use and functionality of your new keyless entry system.

Продукт бүттүview

The Keyless2Go replacement unit includes a 5-button keyless entry remote fob and an uncut transponder ignition car key. This system is designed to provide convenient access and remote start capabilities for compatible vehicles.

Image: The Keyless2Go replacement key fob and uncut transponder key. The fob features Lock, Unlock, Remote Start, Panic, and Trunk Release buttons. The key is a standard B111 type, ready for cutting.

Key Fob Buttons and Functions

• Кулпу баскычы: Бардык унаа эшиктерин бекитет.
• Кулпуну ачуу баскычы: Бардык унаа эшиктерин ачат.
• Алыстан баштоо баскычы: Initiates remote engine start (if vehicle equipped).
• Паника баскычы: Унаа сигнализациясын иштетет.
• Trunk Release Button: Opens the vehicle's trunk or liftgate (if vehicle equipped).

Шайкештик

Before proceeding with setup, it is crucial to verify that this replacement key fob is compatible with your vehicle. Please cross-reference the FCC ID and Part Numbers with your original key fob and vehicle specifications.

Image: Visual guide for verifying compatibility. It shows the key fob and key alongside a list of compatible FCC IDs and Part Numbers. Ensure your original FCC ID and button style match.

Compatible FCC IDs:

• OUC60270
• OUC60221

Шайкеш бөлүктүн номерлери:

• 25839476
• 22951509
• 22936101
• 20952477
• 15913415
• 5922373
• 20869053
• 5922377
• 22756459
• B111

For a full list of compatible vehicles, please refer to the product description or use the vehicle fitment tool provided by Keyless2Go. Your vehicle must already be equipped with keyless entry for the remote to work.

Орнотуу жана программалоо

The new key fob and key require specific steps for proper functionality. The key blade must be cut, and the remote fob must be programmed to your vehicle.

Ачкычты кесүү

Image: Visual instruction indicating that a locksmith or dealer is required to cut and program the new key blade.

Bring your new uncut transponder key to a professional locksmith or dealer to get it cut and programmed. This step is essential before attempting DIY remote programming.

Remote Programming (DIY)

You can program your new keyless entry key fob yourself if you have at least one working original key that starts your vehicle. Your new unprogrammed key must be cut prior to performing self-programming.

Image: Detailed instructions for DIY programming of the Keyless2Go key fob, including steps for vehicles with and without a Driver Information Center.

Option 1: For vehicles with the Driver Information Center (DIC)

1. Insert key and switch the ignition ON (just shy of starting vehicle without cranking engine).
2. Press the vehicle information button until PRESS TO RELEARN REMOTE KEY is displayed.
3. Press the set/reset button (button will have a checkmark) until REMOTE KEY LEARNING ACTIVE is displayed. The vehicle is now in programming mode.
4. Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will be heard indicating successful programming.
5. Repeat step 4 to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALL remotes including existing remotes.
6. To exit programming mode turn ignition OFF, remove key and test all remotes.

Option 2: For vehicles without the Driver Information Center (DIC)

1. Insert key into the ignition and turn to ON (Just shy of starting vehicle without cranking engine).
2. Press the trip odometer reset button until RELEARN REMOTE KEY is displayed.
3. Press and hold the trip odometer reset button for approximately 3 seconds until REMOTE KEY LEARNING ACTIVE displays.
4. Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will be heard indicating successful programming.
5. Repeat step 4 to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALL remotes including existing remotes.
6. To exit programming mode turn ignition OFF, remove key and test all remotes.

If you encounter any difficulties, free tech support is included with every purchase. An expert technician is available to assist with troubleshooting.

Операция

Once your key fob is programmed, you can utilize its various functions for convenient vehicle access and control.

Эшиктерди бекитүү жана ачуу

• To lock doors: Press the Кулпу баскычын бир жолу.
• To unlock doors: Press the Кулпуну ачуу баскычын бир жолу.

Remote Start

• To remote start: Press the Remote Start button (often a circular arrow) twice within a few seconds. The vehicle's lights may flash, and the engine will start.
• To turn off remote start: Press the Remote Start баскычын бир жолу.

Panic Alarm

• Иштетүү үчүн: баскычын басып, кармап туруңуз Дүрбөлөң button (often a red horn icon) for a few seconds. The vehicle's alarm will sound and lights will flash.
• To deactivate: Press the Дүрбөлөң button again, or press any other button on the fob.

Магистралдык релиз

• To open trunk/liftgate: Press and hold the Магистралдык релиз button (often a car with an open trunk icon) for a few seconds.

Техникалык тейлөө

Батареяны алмаштыруу

The key fob is powered by 1 Lithium Metal battery (included). If the remote's range decreases or it stops responding, the battery may need replacement.

1. Carefully open the key fob casing using a small flat-head screwdriver or a coin.
2. Note the orientation of the existing battery.
3. Эски батареяны алып салыңыз.
4. Insert a new Lithium Metal battery (e.g., CR2032, verify type if different) with the positive (+) side facing up.
5. Snap the key fob casing кайра бекем бириктирилет.

Care Instructions

• Avoid exposing the key fob to extreme temperatures, direct sunlight for prolonged periods, or moisture.
• Ачкычтын тетигин түшүрүп албаңыз же катуу соккуга дуушар кылбаңыз.
• Clean the exterior with a soft, dry cloth if necessary. Avoid using harsh chemicals or abrasive cleaners.

Проблемаларды чечүү

If you experience issues with your Keyless2Go replacement key fob, refer to the following common problems and solutions:

• Remote not responding after programming:
  • Ensure all steps of the programming procedure were followed correctly.
  • Verify that all existing and new remotes were programmed during the same session.
  • Check the battery in the key fob and replace if necessary.
  • Confirm the key fob's FCC ID and part number are compatible with your vehicle.
• Key blade not turning in ignition:
  • Ensure the key was cut accurately by a professional locksmith or dealer.
  • Verify the key is fully inserted into the ignition.
• Remote range is poor:
  • Replace the key fob battery.
  • Ensure there are no strong radio interference sources nearby.

For persistent issues or further assistance, please contact Keyless2Go customer support.

Техникалык шарттар

Кепилдик жана колдоо

Keyless2Go offers a 100% satisfaction risk-free purchase within 30 days. If the remote does not perform as expected for any reason, you may contact Keyless2Go for a refund or replacement.

Free technical support is included with every purchase. Should you have any questions or require assistance with your Keyless2Go product, an expert technician is available to help troubleshoot.