DS18 SB12A

DS18 SB12A 12-Inch Shallow Subwoofer Enclosure with Built-in Amplifier Колдонмо

Model: SB12A | Brand: DS18

1. Киришүү

This manual provides detailed instructions for the installation, operation, and maintenance of your DS18 SB12A 12-inch Shallow Subwoofer Enclosure with Built-in Amplifier. Please read this manual thoroughly before using the product to ensure proper function and to prevent damage.

The DS18 SB12A is an all-in-one car audio solution designed to deliver powerful bass in vehicles with limited space. It features a 12-inch subwoofer integrated into a sealed enclosure, powered by a built-in 350W RMS (700W MAX) monoblock digital ampөмүрлүү.

2. Коопсуздук маалыматы

Маанилүү коопсуздук чаралары:

  • Электр иштерин баштоодон мурун, ар дайым унаанын аккумуляторунун терс терминалын сууруп алыңыз.
  • Бардык зымдар туура жолго коюлганын жана чымчылып же бузулушун алдын алуу үчүн бекемделгенин текшериңиз.
  • Use appropriate gauge wiring for power and ground connections as specified.
  • Install the subwoofer in a secure location to prevent it from shifting during vehicle movement.
  • Агрегатты нымдуулукка же экстремалдык температурага дуушар кылуудан алыс болуңуз.
  • Түзмөктү өз алдынча ачууга же оңдоого аракет кылбаңыз. Бардык тейлөө иштерин квалификациялуу адистерге тапшырыңыз.
  • Prolonged exposure to high sound pressure levels can cause permanent hearing damage.

3. Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

  • DS18 SB12A 12-Inch Shallow Subwoofer Enclosure with Built-in Ampөмүрлүү
  • Кабель менен алыстан басс деңгээлин башкаруу туткасы
  • Жогорку деңгээлдеги киргизүү аппараты
  • Mounting Hardware (screws, brackets if applicable)
  • Колдонуучунун Колдонмосу (бул документ)

4. Продукциянын өзгөчөлүктөрү

  • Integrated 12-inch subwoofer and monoblock digital ampөмүрлүү.
  • Compact sealed enclosure design for space-saving installation.
  • 350W RMS / 700W MAX power handling.
  • Adjustable Low Pass Filter (LPF).
  • Selectable Phase control (0-180°).
  • Variable Bass Boost (0-6 dB at 50Hz).
  • High-level (speaker level) and Low-level (RCA) inputs for versatile connectivity.
  • Remote bass level control for convenient adjustment.
  • Protection circuitry: Thermal, Over-Load, DC Output, Short Circuit.

5. Орнотуу жана орнотуу

Proper installation is crucial for optimal performance and safety. If you are unsure about any part of the installation process, consult a professional car audio installer.

5.1 Монтаждалуучу жер

Choose a secure and dry location for the subwoofer enclosure, such as the trunk or behind the seats in a truck. Ensure there is adequate ventilation around the amplifier section to prevent overheating. The shallow design of the SB12A is ideal for tight spaces.

DS18 SB12A subwoofer enclosure installed in a vehicle trunk, showing its compact size and dimensions.

Image: The DS18 SB12A subwoofer enclosure shown installed in a vehicle trunk, highlighting its compact dimensions (14.96" H x 19.3" W x 14.92" D1 / 7.4" D2) suitable for limited spaces.

5.2 Зымдарды туташтыруу

караңыз amplifier control panel diagram for correct wiring. Ensure all connections are tight and secure.

Деталдаштырылган view of the DS18 SB12A amplifier control panel with input and output terminals, and adjustment knobs.

Сүрөт: деталдуу view -ныкы amplifier control panel. This panel includes connections for power (GND, REM, +12V), fuse, high-level speaker inputs, RCA inputs, and RCA outputs, along with adjustment controls.

  1. Кубат туташуу (+12V): Connect an 8-gauge power cable directly from the vehicle's positive battery terminal to the "+12V" terminal on the amplifier. Install an appropriate fuse (30A) within 18 inches (45 cm) of the battery.
  2. Жерге туташуу (GND): Connect an 8-gauge ground cable from the "GND" terminal on the amplifier to a clean, unpainted metal surface on the vehicle chassis. Ensure a good electrical connection.
  3. Алыстан күйгүзүү (REM): Connect a remote turn-on wire from your head unit's remote output to the "REM" terminal on the ampкөтөргүч. Бул зым айлантат ampкөтөргүчтү баш бирдигиңиз менен күйгүзүңүз жана өчүрүңүз.
  4. Аудио киргизүү:
    • Төмөн деңгээл киргизүү (RCA): If your head unit has RCA pre-outs, connect RCA cables from the head unit's subwoofer or rear pre-out to the "INPUT" RCA jacks on the ampөмүрлүү.
    • Жогорку деңгээлдеги киргизүү (динамик деңгээли): If your head unit does not have RCA pre-outs, use the supplied high-level input harness. Connect the speaker wires from your head unit's rear speakers to the corresponding inputs on the harness, then plug the harness into the "SPK IN" connector on the ampөмүрлүү.
  5. Алыстан басс башкаруу: Plug the remote bass control knob into the designated port on the amplifier. Mount the knob in a convenient location for easy access.

6. Иштөө нускамалары

орнотулгандан кийин, тууралоо ampоптималдуу үн аткаруу үчүн көтөргүч орнотуулары.

6.1 Ampкөтөргүч Controls

  • УТУШ: This control matches the input sensitivity of the amplifier to the output of your head unit. Start with the gain at minimum and slowly increase it until you hear distortion, then back off slightly.
  • LPF (төмөн өткөрүүчү чыпка): Adjusts the upper frequency limit of the subwoofer. Typically set between 50Hz and 120Hz. Frequencies above this setting will be filtered out.
  • БАС КҮЧӨТҮҮ: Increases the bass output at 50Hz. Use sparingly to avoid distortion and potential damage. Adjustable from 0-6 dB.
  • ФАЗА: Allows you to adjust the phase of the subwoofer output (0° or 180°) to match the phase of your other speakers. Experiment with both settings to find the one that provides the most coherent bass response.
  • АЛЫС: Зымдуу пульттун басс деңгээлин башкаруусун туташтырат.
DS18 SB12A remote bass level control knob with cable.

Image: The remote bass level control knob, which allows for convenient adjustment of the subwoofer's output level from the driver's seat.

7. Техникалык тейлөө

The DS18 SB12A requires minimal maintenance. Follow these guidelines to ensure longevity:

  • Keep the enclosure clean and free of dust and debris. Use a soft, dry cloth for cleaning.
  • айланасында адекваттуу аба агымын камсыз кылуу amplifier to prevent overheating. Do not block ventilation ports.
  • Мезгил-мезгили менен бардык зымдарды туташтыргычтын бекемдигин жана коррозиясын текшерип туруңуз.
  • Avoid placing heavy objects on the enclosure.

8. Кыйынчылыктарды

If you experience issues with your DS18 SB12A, refer to the following troubleshooting guide:

КөйгөйМүмкүн себепЧечим
Кубат жок / Үн жок
  • Күйгүзүүчү
  • Бошогон кубат же жерге туташуу
  • Алыстан күйгүзүү сигналы жок
  • Туура эмес зымдар
  • Check and replace fuse (30A).
  • Бардык кубат, жерге жана алыскы туташуулардын коопсуз экенин текшериңиз.
  • Башкы блок алыстан күйгүзүү сигналын берип жатканын текшериңиз.
  • Зымдарды үзгүлтүккө учуратуу же кыска зымдарга текшерүү.
No Sound (Power LED On)
  • Input signal issue (RCA/High-Level)
  • Пайда өтө төмөн коюлду
  • Башкы бирдиктин үнү өтө төмөн
  • RCA же жогорку деңгээлдеги киргизүү туташууларын текшериңиз.
  • Increase the GAIN control gradually.
  • Башкы бирдиктин көлөмүн көбөйтүү.
Distorted Sound
  • Пайда өтө жогору коюлган
  • LPF set incorrectly
  • Bass Boost too high
  • Жерге начар байланыш
  • GAIN көзөмөлүн азайтыңыз.
  • LPFди ылайыктуу жыштыкка тууралаңыз (мисалы, 80-100 Гц).
  • Reduce Bass Boost.
  • Жерге туташуунун таза жана коопсуз экенин текшериңиз.
Amplifier Overheating (Protection LED On)
  • Жетишсиз желдетүү
  • Туура эмес импеданс жүгү
  • Кеңейтилген жогорку көлөмдөгү операция
  • айланасында адекваттуу аба агымын камсыз кылуу ampөмүрлүү.
  • Check speaker impedance (SB12A is 2 ohms).
  • Үндү азайтыңыз же уруксат бериңиз ampмуздатуу үчүн көтөргүч.

9. Техникалык шарттар

9.1 Корпустун спецификациялары

  • Ички көлөмү: 16L / 0.56 ft³
  • Жүктөө конфигурациясы: Параллель
  • куту түрү: Мөөр басылган
  • куту материалы: 0.59" MDF
  • Аяктоочу материал: Non-Woven fabric
  • Dimensions (H x W x D1 / D2): 14.96" (380mm) x 19.3" (490mm) x 14.92" (125mm) / 7.4" (188mm)
  • Салмагы: Approximately 0.01 Ounces (Note: This value appears to be a data entry error. The actual weight of a subwoofer enclosure would be significantly higher.)

9.2 Subwoofer Specifications

  • Динамик өлчөмү: 12" (312мм)
  • Жалпы импеданс: 2 Ом
  • RMS кубаттуулугун башкаруу: 350 Вт
  • MAX кубаттуулукту иштетүү: 700 Вт
  • Сезимталдуулук (1w/1m): 87дБ
  • Жыштык жообу: 30-250 Гц
  • Voice Coil Диаметри: 1.75" (44.43мм)
  • Үн катушкасы мурунку материал: Алюминий
  • Ороо материалы: EISV
  • Конус материалы: IPP
  • Курчап турган материал: Каучук
  • Себет материалы: SPCC
  • Магниттик материал: Феррит
  • Магниттин салмагы: 50 Oz

9.3 Amplifier өзгөчөлүктөрү

  • Ampкөтөргүч класс: Санарип
  • Ampкуткаруучу түрү: Моноблок сабвуфер
  • Каналдардын саны: 1 CH
  • Минималдуу импеданс: 2 Ом
  • Сигнал ызы-чуу катышы: 75 дБ
  • Efficiency @ 4 ohms: 75%
  • Жалпы гармоникалык бурмалоо (THD): 0.30%
  • Low Level Input Range: 0.1-0.6 В
  • High Level Input Range: Ооба
  • Тандалган X-Over: LPF Fixed
  • X-Over Filter Range: 51 - 200 Гц
  • Бассты жогорулатуу диапазону: 0-6 дБ
  • Басты күчөтүү жыштыгы: 50Hz
  • Фаза тандагыч: 0-180°
  • LED көрсөткүчү: Power - Protection
  • Кубат киргизүү терминалынын өлчөмү: 8 GA
  • Страховка Өлчөмү: 30 А
  • Деңгээлди алыстан башкаруу: Ооба
  • Жылуулук коргоо: Yes (75°C / 167°F)
  • Ашыкча жүк коргоо: Ооба
  • DC чыгууну коргоо: Ооба
  • Кыска туташуулардан коргоо: Ооба

10. Кепилдик маалыматы

This product comes with a Limited Warranty. Please refer to the warranty card included with your product or visit the official DS18 website for detailed terms and conditions regarding warranty coverage, duration, and claims process.

11. Кардарларды колдоо кызматы

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact DS18 customer support through their official webсайт же сатып алуу менен камсыз болгон байланыш маалыматы.

Сиз да зыярат кылсаңыз болот DS18 Store on Amazon көбүрөөк продукт маалымат жана ресурстар үчүн.

Тектеш документтер - SB12A

Preview DS18 PU110A 10" Active Subwoofer Enclosure Owner's Manual
Owner's manual and installation guide for the DS18 PU110A 10-inch active shallow subwoofer enclosure, detailing functions, controls, wiring, specifications, and warranty information for pickup trucks.
Preview DS18 EN-DF10 10" Shallow Down-Firing Subwoofer Enclosure Owner's Manual
Owner's manual for the DS18 EN-DF10 passive subwoofer enclosure, detailing installation, specifications, measurements, and warranty information. Features a 10-inch shallow subwoofer with a down-firing design.
Preview DS18 PSW12.2D 12-Inch Dual Voice Coil Shallow Subwoofer Owner's Manual
This owner's manual provides comprehensive specifications, Thiele & Small parameters, recommended enclosure details, and measurement data for the DS18 PSW12.2D 12-inch dual voice coil shallow subwoofer. It also includes warranty information and important safety warnings.
Preview DS18 PSW12.4D 12-Inch Dual Voice Coil Shallow Subwoofer Owner's Manual
This owner's manual provides detailed specifications, Thiele & Small parameters, recommended enclosure dimensions, and measurement details for the DS18 PSW12.4D 12-inch dual voice coil shallow subwoofer.
Preview DS18 JBASS Shallow Subwoofer Box Owner's Manual
Owner's manual for the DS18 JBASS shallow subwoofer box, detailing features, dimensions, wiring diagrams, compatibility with Jeep JK, JKU, JL, and installation information for 2x10" subwoofers.
Preview DS18 IXS10.4D 10-Inch Shallow Subwoofer Owner's Manual
Owner's manual for the DS18 IXS10.4D 10-inch shallow mount subwoofer, detailing specifications, motor components, Thiele & Small parameters, physical measurements, and recommended enclosure dimensions.