Newgoal NG8000005ty-RF

Newgoal 2 каналдуу WiFi зымсыз акылдуу коммутатор колдонуучусунун колдонмосу

Model: NG8000005ty-RF

1. Продукт бүтүп калдыview

The Newgoal 2-Channel WiFi Wireless Smart Switch is a versatile relay module designed for smart home automation. It supports both momentary (inching) and self-locking work modes, allowing remote control of connected home appliances or power circuits via the Tuya/Smart Life mobile application. This module also features 433MHz RF remote control compatibility, providing flexible control options. It is compatible with popular voice assistants like Amazon Alexa and Google Home.

Newgoal 2-Channel WiFi Wireless Smart Switch with remote and phone app

Figure 1: Newgoal 2-Channel WiFi Wireless Smart Switch module, accompanied by its 433MHz RF remote control and a smartphone displaying the Tuya/Smart Life app interface.

2. Продукциянын өзгөчөлүктөрү

Newgoal Smart Switch features diagram

Figure 2: ашыкview of key features including momentary button, three working modes, smart timer, share control, Google Home/Amazon Alexa compatibility, 433RF control, and WiFi control.

3. Пакеттин мазмуну

Пакетти ачкандан кийин, төмөнкү нерселердин бардыгы камтылганын текшериңиз:

Newgoal Smart Switch package contents

Figure 3: The Newgoal Smart Switch module, its 433MHz RF remote control, and the included user guide, as typically found in the product packaging.

4. Техникалык шарттар

АтрибутНарк
БрендNewgoal
Модель номериNG8000005ty-RF
ASINB09P1BFGLR
UPC735372698196
Power InputUSB 5V же AC/DC 7-32V
Максималдуу которуу томtage32 вольт
Байланыш түрүАдатта ачык
Байланыш материалыSilver
Иштөө режимиАвтоматтык
Иштөө убактысы1 Seconds (Inching mode default)
Зымсыз байланыш2.4GHz Wi-Fi, 433MHz RF
Өлчөмдөрү (L x W x Y)67 мм x 41 мм x 20 мм (болжол менен)
Элемент Салмагы10.2 унция

5. Орнотуу колдонмосу

5.1 Компонентти идентификациялоо

Newgoal Smart Switch component layout

4-сүрөт: Детальдуу view of the Newgoal Smart Switch module, highlighting key components such as relays, LEDs, Wi-Fi antenna, 433RF receiver, input terminals, and control buttons.

5.2 Электр зымдары боюнча нускамалар

Маанилүү: Ensure power is disconnected before performing any wiring. Incorrect wiring can damage the device or connected appliances.

Newgoal Smart Switch interlock wiring diagram

5-сүрөт: Мисample wiring diagrams for the interlock working mode, demonstrating connections for both DC motors (5-30V DC) and AC motors (90-250V AC).

5.3 App Download and Wi-Fi Pairing

  1. Колдонмону жүктөп алуу: Издөө "Tuya Smart" or "Smart Life" in your mobile app store (Google Play for Android, App Store for iOS) and install it.
  2. Катталуу/Кирүү: Колдонмону ачып, жаңы каттоо эсебин каттаңыз же сизде мурунтан эле бар болсо кириңиз.
  3. Түзмөктү күйгүзүү: Connect the Newgoal Smart Switch to a power source. The Wi-Fi LED should start blinking. If not, press and hold the "Momentary/Self-lock/Interlock Modes Toggle Button" for approximately 5 seconds until the Wi-Fi LED blinks rapidly.
  4. Түзмөк кошуу: In the Tuya/Smart Life app, tap the "+" icon in the top right corner to add a device. Select "Auto Scan" or manually add the device under "Electrical" -> "Switch (Wi-Fi)".
  5. 2.4 ГГц Wi-Fi'га туташуу: Ensure your smartphone is connected to a 2.4GHz Wi-Fi network. The device does not support 5GHz Wi-Fi or Mesh Wi-Fi systems. Enter your Wi-Fi password in the app.
  6. Жупташтыруу: Follow the on-screen instructions in the app. Keep the device close to your Wi-Fi router during the pairing process. Once successfully paired, the Wi-Fi LED will stop blinking and remain solid.
  7. Түзмөктүн атын өзгөртүү: After successful pairing, you can rename the device and individual channels within the app for easier identification.

6. Иштөө режимдери

The module supports three distinct operating modes. You can switch between these modes by pressing the "Momentary/Self-lock/Interlock Modes Toggle Button" on the board.

6.1 Momentary (Inching) Mode

6.2 Өзүн-өзү кулпулоо режими

6.3 Блокировкалоо режими

7. RF Remote Control Pairing

The module can learn up to 14 different 433MHz fixed/learning codes per channel. It does not support encrypted or rolling codes.

  1. Жупташуу үчүн: Press and hold the desired "RF Pairing Button / Manual Switch" (Button 1 for Channel 1, Button 2 for Channel 2) on the module for approximately 3 seconds. The corresponding LED will blink, indicating it's in pairing mode. Then, press a button on your 433MHz RF remote control. The LED on the module will stop blinking, confirming successful pairing.
  2. To Clear RF Codes: Press and hold the desired "RF Pairing Button / Manual Switch" on the module for approximately 15 seconds. The corresponding LED will blink rapidly and then turn off, indicating all learned RF codes for that channel have been cleared.
Newgoal Smart Switch with RF remote and app control

Figure 6: The Newgoal Smart Switch module demonstrating both 433MHz RF remote control and Wi-Fi app control capabilities.

8. Техникалык тейлөө

9. Кыйынчылыктарды

КөйгөйМүмкүн болгон себеп / Чечим
Түзмөк Wi-Fi'га туташа албайт.
  • Wi-Fi тармагыңыз 2.4 ГГц экенин текшериңиз. 5 ГГц тармактары колдоого алынбайт.
  • Wi-Fi сырсөзүңүздүн туура экенин текшериңиз.
  • Place the device closer to your Wi-Fi router during pairing.
  • Ensure the Wi-Fi LED is blinking rapidly before attempting to pair. If not, reset the device by holding the mode toggle button for 5 seconds.
  • Temporarily disable 5GHz on your router or create a separate 2.4GHz SSID if you have a dual-band router with a single SSID.
RF remote control not working.
  • Ensure the remote control is 433MHz and uses a fixed or learning code (not encrypted or rolling code).
  • Re-pair the remote control with the module following the instructions in Section 7.
  • Пульттун батареясын текшериңиз.
Device is unresponsive in the app.
  • Check your internet connection and Wi-Fi signal strength.
  • Түзмөк күйгүзүлгөнүн текшериңиз.
  • Restart the Tuya/Smart Life app.
  • If the issue persists, try re-pairing the device to your Wi-Fi network.
Реле которулбайт.
  • Verify the wiring connections are correct and secure.
  • Ensure the power supply to the module is stable and within the specified voltage range (5V or 7-32V).
  • Check the operating mode (Momentary, Self-locking, Interlock) to ensure it matches your intended use.

10. Кепилдик жана колдоо

This product comes with a standard return policy allowing for refund or replacement within 30 days of purchase, as per Amazon's policy. For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact the seller directly through your Amazon order history. Provide your order number and a detailed description of the issue for prompt assistance.

Сатуучу: Newgoal-US

For further information or updates, please refer to the product page on Amazon or the official Newgoal webсайт.

Тектеш документтер - NG8000005ty-RF

Preview Szaoju Universal Gate Remote Control Switch: Иштөө режимдери
Szaoju DC 12V RF 433 МГц релелик кабыл алгыч модулу үчүн ар кандай иштөө режимдерин конфигурациялоо жана колдонуу боюнча көрсөтмө, анын ичинде таптоо, өзүн-өзү кулпулоо, блокировкалоо жана кечиктирүү режимдери.
Preview CK-BL602-4SW-HS-03(139) Yiweilian Smart Relay модулу: Колдонуучунун колдонмосу жана Орнотуу колдонмосу
CK-BL602-4SW-HS-03(139) бир каналдуу акылдуу реле модулу үчүн толук колдонуучу колдонмо. Продукциянын параметрлерин, зымдарды, Yiweilian (E-Welink) колдонмосу менен орнотууну, иштөө режимдерин (дюймдук, өзүн-өзү кулпулоо, блокировкалоо), алыстан жупташтыруу жана көйгөйлөрдү оңдоону камтыйт.
Preview MIUCDA WSMD-4 акылдуу өз алдынча иштетүүчү модуль колдонуучусунун колдонмосу
MIUCDA WSMD-4 Smart DIY Switch модулу боюнча колдонуучунун колдонмосу, орнотуунун чоо-жайы, AVATTO/Smart Life менен колдонмону интеграциялоо, түзмөктөрдү жупташтыруу жана RF алыстан башкарууну орнотуу.
Preview TYWR 85-250V RF Tuya Smart Self-Locking Relay Module User Guide
User guide for the TYWR 85-250V RF Tuya Smart self-locking relay module. Learn how to install, add to the Tuya app, pair remote controls, and troubleshoot issues.
Preview Sonoff 4CH Pro (R2) колдонуучусунун колдонмосу: Орнотуу, зымдар жана режимдер
Sonoff 4CH Pro (R2) үчүн колдонмонун кеңири колдонмосу, анда колдонмону жүктөп алуу, AC жана DC моторлору үчүн зымдарды орнотуу боюнча көрсөтмөлөр, WiFi алыстан башкаруу пультун орнотуу, иштөө режиминин конфигурациялары (өзүн-өзү кулпулоо, дюймдоо, блоктоо), RF алыстан жупташтыруу, бөлүшүү жана убакытты өзгөртүү сыяктуу колдонмо функциялары жана кеңири таралган көйгөйлөрдү чечүү камтылган.
Preview QIACHIP KR1201A/KR1201B 12V 1-канал кабылдагыч: Орнотуу жана иштетүү боюнча колдонмо
Comprehensive guide for the QIACHIP KR1201A and KR1201B 12V 1-channel RF relay receiver module. Learn about wiring diagrams, operating modes (Momentary, Toggle, Latching, Delay), and setup procedures for various applications like controlling lights, door locks, and motors.