HANMATEK HO52S 3-in-1 Handheld Oscilloscope Multimeter with Waveform Generator

1. Киришүү

This manual provides detailed instructions for the safe and effective operation of your HANMATEK HO52S 3-in-1 Handheld Oscilloscope Multimeter with Waveform Generator. Please read this manual thoroughly before use and retain it for future reference.

2. Коопсуздук маалыматы

Always observe basic safety precautions when using this device to reduce the risk of fire, electric shock, or personal injury.

• Ensure the device is powered off before connecting or disconnecting probes.
• Максималдуу киргизүү көлөмүн ашпаңызtage ratings (750VAC and 1000VDC for multimeter mode).
• Verify probe connections are secure before taking measurements.
• Аппаратты нымдуу жерде колдонуудан качыңыз же damp шарттар.
• Do not attempt to repair or modify the device; refer servicing to qualified personnel.

3. Негизги өзгөчөлүктөрү

The HANMATEK HO52S combines three essential functions in one compact handheld device:

• Oscilloscope Mode: Dual channel, 50MHz bandwidth, 125MSa/s real-time sampling rate, 8k record length, 10000wfms/s waveform refresh rate. Features include cursor measurement, four automatic measurement functions, XY function, and one-key automatic setting.
• Multimeter Mode: 4 1/2 digits (20000 counts) true RMS digital display. Standard voltage, current, resistance, diode, continuity, and capacitance tests. Automatic range function, maximum input voltage 750VAC/1000VDC. Independent multimeter and oscilloscope inputs, read hold, and relative measurement functions.
• Сигнал генератору: Maximum waveform output frequency up to 25MHz. Outputs sine waves, sawtooth waves, square waves, pulse waves, and built-in special waveforms.
• Сактоо функциясы: Stores 4 sets of settings, 4 reference waveforms, 4 images, and 4 CSV format waveforms for easy comparison and analysis.
• Байланыш: USB Type-C interface for mobile power supply and adapter charging. Supports computer connection for reading stored images and CSV waveforms.
• Кубаттуулугу: Ultra-low power consumption (less than 3W), providing approximately 6 hours of continuous operation.

Figure 3.1: ашыкview of the HO52S 3-in-1 functionality.

4. Пакеттин мазмуну

Пакетти ачканда бардык буюмдар бар экенин жана жакшы абалда экендигин текшериңиз:

• 1 x HANMATEK HO52S 3-in-1 Handheld Digital Oscilloscope / Multimeter / Signal Generator
• 1 x Ташуу сумкасы
• 2 x Oscilloscope Probes
• 1 х адаптер
• 1 x USB кабели
• 1 x Multimeter Pen
• 1 x User Manual
• 1 x Calibration Oscilloscope
• 1 x CD (for software download)

Сүрөт 4.1: Камтылган аксессуарлар жана негизги блок.

5. Продукт бүтүп калдыview

The HANMATEK HO52S features a 3.5-inch TFT screen and an intuitive button layout for ease of use.

5.1 Алдыңкы панелдин башкаруу элементтери

Figure 5.1: Front panel and side view белгиленген компоненттер менен.

• Дисплей аймагы: 3.5-inch TFT screen for waveform and measurement display.
• F1-F4 баскычтары: Multi-function keys, context-sensitive.
• Режим ачкычы: Switches between oscilloscope, multimeter, and signal generator modes.
• CH1/2 ачкычы: Channel switch key for oscilloscope.
• HDR Key: Кайтаруучу ачкыч.
• Системдик ачкыч: Enters system settings.
• Сактоо ачкычы: Enters save settings.
• Кубат которгучу: Аппаратты күйгүзөт/өчүрөт.
• Триг/Δ ачкычы: Trigger menu for oscilloscope, relative value key for multimeter.
• Авто ачкыч: Automatic setting for oscilloscope, range key for multimeter.
• Run/Stop Key: Starts/stops waveform acquisition for oscilloscope, hold value key for multimeter.
• Чабыттоо баскычтары: Up, Down, Left, Right, and Enter for menu navigation and parameter adjustment.

5.2 Киргизүү/чыгыш порттору

• Oscilloscope Input (CH1, CH2): Осциллограф зонддору үчүн BNC туташтыргычтары.
• Waveform Generator Output (GEN Out): BNC connector for signal output.
• Multimeter Input Ports (A, mA, COM, VΩHz+): Standard multimeter jacks.
• USB Type-C порту: For charging and PC communication.
• Calibration Signal: 3.3V/1kHz square wave signal output.

6. Баштапкы орнотуу

6.1 Күйгүзүү/өчүрүү

1. Күйгүзүү үчүн баскычты көпкө басыңыз Power Switch баскычы.
2. Өчүрүү үчүн, көпкө басыңыз Power Switch кайра баскычын.

6.2 Аппаратты заряддоо

Connect the provided USB Type-C cable to the device's USB port and the adapter to a power outlet. The device supports charging via mobile power banks as well.

Figure 6.1: USB Type-C charging.

6.3 Тилди тандоо

Upon first power-on, you may be prompted to select a language. Use the navigation keys to select your preferred language (e.g., English) and press the Enter key to confirm.

7. Иштөө режимдери

басыңыз Mode button to switch between Oscilloscope, Multimeter, and Signal Generator functions.

7.1 Осциллограф режими

Connect oscilloscope probes to the CH1 or CH2 BNC inputs. Ensure the probe's magnification setting (1X or 10X) matches the device's setting for accurate readings.

Figure 7.1: Oscilloscope waveform display.

• Автоматтык түрдө коюу: басыңыз Авто button for automatic waveform setup.
• Триггер: колдонуу Триг/Δ button to access trigger settings. Adjust trigger level and mode (Edge, Video, Pulse, Slope) for stable waveform display.
• Курсорду өлчөө: Enable cursors to precisely measure voltage (V) and time (T) differences on the waveform.
• Сактоо: басыңыз Сактоо button to store waveform data or screenshots.

7.2 Мультиметрдик режим

Connect the multimeter test leads to the appropriate input jacks (COM, VΩHz+, mA, 10A) based on the measurement type.

Figure 7.2: Multimeter voltage өлчөө.

• Функция тандоо: Use the navigation keys to select desired measurement function (Voltage, Current, Resistance, Diode, Continuity, Capacitance).
• Авто диапазон: басыңыз Авто button to enable or disable auto-ranging.
• Кармап туруу: басыңыз Run/Stop button to hold the current reading.
• Салыштырмалуу өлчөө: колдонуу Триг/Δ button to activate relative measurement mode.

7.3 Сигнал генераторунун режими

Connect the output of the signal generator (GEN Out) to the circuit or device under test.

Figure 7.3: Signal generator settings.

• Толкун формасын тандоо: Use the navigation keys to select the desired waveform type (Sine, Square, Sawtooth, Pulse, etc.).
• Параметрди тууралоо: Adjust frequency, amplitude, and offset using the navigation keys.

8. Өркүндөтүлгөн функциялар

8.1 Компьютерге туташуу

Connect the HO52S to a computer using the provided USB cable. The device will be recognized as a USB flash drive, allowing you to access and transfer stored images and CSV waveform data for further analysis.

Figure 8.1: PC connection for data transfer.

8.2 Өзүн өзү калибрлөө

The device features a self-calibration function to maintain accuracy. Refer to the on-screen menu in System Settings for initiating calibration.

9. Кыйынчылыктарды

• Туура эмес окуулар: Ensure probe magnification settings (1X/10X) on both the probe and the device match. Select the correct coupling mode (DC for DC signals, AC for AC signals).
• Туруксуз толкун формасы: Verify proper grounding of the probe. Adjust the trigger level to approximately 50% of the signal amplitude. Switch the trigger mode to Normal or Single for non-periodic signals.
• Waveform Not Displayed/Appears in Corner: Adjust the time base and vertical sensitivity settings. Fine-tune the trigger level. For low-frequency signals (below 45Hz), manual adjustment of frequency may be required as auto-calibration might not be effective.
• Түзмөк жооп бербейт: Check battery level. If fully charged, try a factory reset via System Settings (note: this will erase all previous settings).

10. Техникалык шарттар

Figure 10.1: Device dimensions.

11. Кепилдик жана колдоо

For warranty information, technical support, or service inquiries, please refer to the contact information provided with your product packaging or visit the official HANMATEK webсайт. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.