Introduction
This manual provides essential instructions for the safe operation, maintenance, and care of your WEN JN8504 8.5-Amp Plate and Biscuit Joiner and WEN JN100B #0 Birch Wood Biscuits. Please read this manual thoroughly before using the product to ensure proper function and to prevent injury. Keep this manual accessible for future reference.
Жалпы коопсуздук маалыматы
Өрт, электр тогуна урунуу жана жеке жаракат алуу коркунучун азайтуу үчүн электр шаймандарын колдонууда ар дайым негизги коопсуздук чараларын сактаңыз.
- Жумуш аймагынын коопсуздугу: Жумушчу жерди таза жана жакшы жарыктандырыңыз. Башаламан же караңгы жерлер кырсыкка чакырат. Жарылуучу чөйрөдө, мисалы, күйүүчү суюктуктар, газдар же чаң бар жерде электр шаймандарын иштетпеңиз.
- Электр коопсуздугу: Power tool plugs must match the outlet. Never modify the plug in any way. Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators.
- Жеке коопсуздук: Ар дайым көздү коргоочу каражаттарды тагыныңыз. Ызы-чуулуу шаймандарды иштеткенде угууну коргоочу каражаттарды колдонуңуз. Тийиштүү кийиниңиз; кенен кийимдерден же зер буюмдардан алыс болуңуз. Узун чачыңызды бекемдеңиз.
- Куралды колдонуу жана кам көрүү: Электр аспапты күчтөп албаңыз. Колдонмоңуз үчүн туура электр шайманын колдонуңуз. Кандайдыр бир тууралоолорду жасоодон, аксессуарларды алмаштыруудан же электр шаймандарын сактоодон мурда вилканы кубат булагынан ажыратыңыз.
- Тейлөө: Электр шаймандарын сактаңыз. Электр шаймандын иштешине таасир этиши мүмкүн болгон кыймылсыз тетиктерди, тетиктерди сындырууну жана башка шарттарды текшериңиз.
Продукт компоненттери
The WEN JN8504 Plate and Biscuit Joiner kit includes the following components:
- WEN JN8504 Plate and Biscuit Joiner
- Detachable Dust Bag
- 4-inch Carbide-Tipped Blade (pre-installed)
- 24 #20 Wood Biscuits
- 16 #10 Wood Biscuits
- 10 #0 Wood Biscuits (WEN JN100B)
- Blow Mold Carrying Case
- Wrench for blade changes
Image 1: WEN JN8504 Plate and Biscuit Joiner, including the carrying case, various sized biscuits, and a wrench.
Сүрөт 2: Детальдуу view of the WEN JN8504 Plate Joiner's adjustable fence and depth settings.
Image 3: A pile of WEN #0 Birch Wood Biscuits, designed for strong wood joints.
Жайгашуу
- Пакеттен чыгаруу: Carefully remove all components from the carrying case. Inspect for any damage that may have occurred during shipping.
- Чаң баштык тиркеме: Attach the detachable dust bag to the dust port on the joiner. Ensure it is securely fastened to collect sawdust during operation.
- Бычак текшерүү: Verify that the 4-inch carbide-tipped blade is securely installed and free from damage. If replacement is needed, refer to the Maintenance section.
- Кубат туташуу: Connect the joiner to a suitable power outlet. Ensure the power switch is in the "OFF" position before plugging in.
Иштөө нускамалары
The WEN JN8504 Plate and Biscuit Joiner is designed for creating strong, precise joints in various woodworking projects.
Adjusting the Fence and Depth
- Бурчту тууралоо: The fence can be set between 0 to 90 degrees. Loosen the angle adjustment knob, set the desired angle using the scale, and tighten the knob securely.
- Бийиктигин тууралоо: Adjust the fence height to accommodate different material thicknesses. Loosen the height adjustment knob, position the fence, and tighten.
- Тереңдикти жөндөө: The joiner features pre-set stops for standard #0, #10, and #20 biscuits. Select the appropriate stop for your biscuit size. For unique sizes, the depth can be manually adjusted.
Image 4: The WEN JN8504 Plate Joiner demonstrating its adjustable fence for angled cuts.
Making a Joint
- Белгилөө: Mark the desired locations for biscuit slots on both workpieces.
- Позициялоо: Place the workpiece firmly on a stable surface. Align the joiner's fence with your marks.
- Кесүү: Hold the joiner firmly with both hands. Turn on the tool and allow the blade to reach full speed. Plunge the blade into the workpiece to cut the slot. Withdraw the tool once the cut is complete.
- Кайталоо: Make corresponding cuts on the mating workpiece.
- Ассамблея: Apply wood glue to the biscuit slots and insert the appropriate size biscuits (e.g., #0, #10, #20). Join the two workpieces together and clamp until the glue dries.
This joiner is suitable for various joint types, including:
- Edge miter joints
- Бурчтук муундар
- T joints
- Offset joints
- Frame joints
- Edge-to-edge joints
Using WEN JN100B #0 Birch Wood Biscuits
The WEN JN100B #0 Birch Wood Biscuits are designed to expand upon contact with water-based glues, providing maximum reinforcement for your woodworking joints.
- Өлчөмү: These #0 biscuits measure 47 by 15 by 4 mm.
- Материал: Comprised of FSC-certified compressed birch wood with diagonal-running wood grain for optimal strength.
- Колдонмо: Ideal for joining sheet goods, squaring edges, and enhancing overall joint strength in lumber, plywood, and composite board.
Сүрөт 5: Жакын план view of a single WEN #0 Birch Wood Biscuit, highlighting its construction.
Техникалык тейлөө
- Тазалоо: After each use, disconnect the tool from power. Clean the tool with a soft, dry cloth. Remove any sawdust or debris from the dust port and around the blade area.
- Бычакты алмаштыруу: If the blade becomes dull or damaged, replace it with a new 4-inch carbide-tipped blade. Use the provided wrench to loosen the blade retaining nut, replace the blade, and tighten securely. Ensure the blade is installed with the teeth facing the correct direction.
- Сактагыч: Store the joiner and biscuits in their carrying case in a dry, secure location, out of reach of children.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Курал башталбайт | Электр менен камсыздоо жок; өчүргүч бузук; зым бузулган | Check power connection and outlet. Ensure switch is ON. Inspect cord for damage. If issues persist, contact customer support. |
| Кесилген сапаты начар / Жыгач күйүп жатат | Dull blade; incorrect plunge speed; improper alignment | Replace blade. Adjust plunge speed. Ensure fence is properly aligned with workpiece. |
| Ашыкча термелүү | Loose blade; damaged blade; internal issue | Check blade for tightness and damage. Replace if necessary. If vibration continues, discontinue use and contact support. |
| Biscuits do not fit snugly | Incorrect depth setting; wrong biscuit size | Verify depth setting matches biscuit size. Ensure correct biscuit size is used for the selected depth. |
Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Модел | JN8504 |
| Мотор | 8.5-Amp |
| Бычактын диаметри | 4 дюйм |
| Жүк жок ылдамдык | 10,000 RPM |
| Тосмо бурчту тууралоо | 0ден 90 градуска чейин |
| Biscuit Sizes Supported | #0, #10, #20 (standard pre-sets) |
| Biscuit Material (JN100B) | FSC-Certified Birch Wood |
| Biscuit Dimensions (#0) | 47 x 15 x 4 мм |
Кепилдик жана Кардарларды колдоо
WEN products are backed by a commitment to customer satisfaction. For warranty information, technical assistance, or to inquire about replacement parts, please contact WEN customer support.
Refer to your product's packaging or the official WEN webакыркы байланыш маалыматы жана кепилдик маалымат үчүн сайт.
