JIARUIXIN SX1718 520H-EPR V14 HLX

JIARUIXIN SX1718 520H-EPR V14 HLX Remote Control Receiver Instruction Manual

Brand: JIARUIXIN | Model: SX1718 520H-EPR V14 HLX

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the JIARUIXIN SX1718 520H-EPR V14 HLX Remote Control Receiver for children's electric ride-on cars. Please read this manual thoroughly before use to ensure proper function and safety.

The SX1718 520H-EPR V14 HLX receiver is designed as a replacement part for specific children's electric vehicles. It is crucial to verify compatibility before installation.

Шайкештик

This product is specifically designed for HLX manufacturer's electric ride-on cars. It is not a universal part and may not be compatible with products from other manufacturers, even if they appear similar.

SX1718 receiver compatibility with V11, V13, V14, V30 models
Image: The SX1718 receiver indicating compatibility with V11, V13, V14, and V30 models.
HLX manufacturer compatibility for remote control and receiver
Image: Illustration showing that the remote and receiver are only suitable for HLX manufacturer products, not other brands like JR.

Орнотуу жана орнотуу

Before installing the new receiver, ensure the electric vehicle's foot pedal function is normal. Check for sufficient battery voltage, proper gearbox operation, and an undamaged fuse.

Verifying Fit

To confirm the control box fits your car, open your existing electric ride-on car and visually inspect the control box. If the appearance of the new control box is identical to your original unit, it should be compatible.

JIARUIXIN SX1718 520H-EPR V14 HLX Remote Control Receiver and matching remote
Image: The SX1718 520H-EPR V14 HLX receiver module shown with its compatible remote control.
Жакын план view of the SX1718 520H-EPR V14 HLX receiver module
Сүрөт: деталдуу view of the SX1718 520H-EPR V14 HLX receiver, highlighting its model number and various connectors.

Remote Control Pairing (Frequency Matching)

The remote control and receiver require frequency matching for the first use or after replacing the remote control batteries. This ensures a secure, one-to-one connection.

  1. Батареяны орнотуу: Open the battery compartment on the remote control. Install two AAA 1.5V batteries, ensuring correct positive and negative polarity. Close the battery cover. The indicator light on the remote will flash, confirming correct battery installation.
  2. Жупташтыруу: Press and hold the 'Code' (car-select) button on the remote control until its indicator light begins to flash.
  3. Унаа күйгүзүү: Turn on the power of the electric ride-on car. The remote control's indicator light will turn off, signifying a successful connection with the car.
  4. Чыгаруу баскычы: Release the 'Code' button. The remote control is now ready for use.

If the remote indicator light continues to flash after turning on the car, or if pairing fails, repeat steps 2 and 3 several times.

Remote control with 'Code' button highlighted for pairing
Image: The remote control with the 'Code' or 'car-select' button circled, indicating its use for frequency matching.

Иштөө нускамалары

The 2.4G wireless remote controller provides various functions for operating the electric ride-on car. Ensure the remote is used by an adult and within 10 meters of the vehicle.

Ылдамдыкты тандоо

Айдоо башкаруу элементтери

Adjusting Steering Wheel Offset (Optional)

If your car has an electronic steering wheel function and the steering wheel is not centered, follow these steps:

  1. Place the car on flat ground. Do not adjust the steering wheel. Turn on the car's power.
  2. Once the car is powered on, adjust the steering wheel to make the wheels point straight forward.
  3. Press the 'Speed Selection' switch on the remote control for 5 seconds. The indicator light will flash, then release the switch. Adjustment is complete.
  4. If adjustment fails, repeat steps 1-3.
Detailed diagram of 2.4G wireless remote controller instructions
Image: A scanned instruction sheet detailing the functions and buttons of the 2.4G wireless remote controller, including pairing and driving controls.

Техникалык тейлөө

Батареяны алмаштыруу (Алыстан башкаруу)

If the remote control distance becomes less than 3 meters, it indicates that the batteries are low and need replacement.

  1. Use a screwdriver to loosen the screw on the back of the remote control.
  2. Батареянын капкагын ачыңыз.
  3. Install two AA 1.5V alkaline batteries, observing the correct polarity as indicated in the compartment.
  4. Батареянын капкагын жаап, аны бурама менен бекитиңиз.

Эскертүү: Эски жана жаңы батарейкаларды же башка маркадагы батарейкаларды аралаштырбаңыз.

Сактагыч

If the remote control will not be used for an extended period, it is recommended to remove the batteries to prevent leakage and potential damage to the circuit board.

Проблемаларды чечүү

Коопсуздук эскертүүлөрү

Техникалык шарттар

Колдоо

If you have any questions or require further assistance regarding this product, please consult the manufacturer or seller. We are available to help you.

For more products from JIARUIXIN, please visit the JIARUIXIN Store.

Тектеш документтер - SX1718 520H-EPR V14 HLX

Preview Voltz Toys SX1718 12V Two-Seater Jeep User Manual
Comprehensive user manual for the Voltz Toys SX1718 12V Two-Seater Jeep ride-on car, covering assembly, operation, safety, charging, maintenance, and troubleshooting.
Preview Thermon HLX™ Design Guide for Hot Water Temperature Maintenance
A comprehensive design guide for Thermon's HLX™ self-regulating heating cables, detailing system components, installation, and specifications for maintaining hot water temperatures in commercial and industrial applications. This guide covers design steps, cable selection, circuit breaker requirements, and insulation specifications.
Preview Lenovo V14 жана V15 жабдыктарды тейлөө боюнча колдонмо
Lenovo V14 жана V15 ноутбуктары үчүн комплекстүү тейлөө жана маалымдама колдонмосу, аппараттык камсыздоону тейлөө, коопсуздук, бузулууларды жоюу жана FRU алмаштыруу процедуралары.
Preview Protectowire Linear Heat Detector EPR & EPR-M Series: Technical Specifications and Installation Guide
Comprehensive guide to Notifier's Protectowire Linear Heat Detector EPR and EPR-M Series. Covers product features, technical specifications, chemical resistance, installation requirements, and available accessories for industrial fire detection applications.
Preview Core SWX Helix Max Ultra 395wh Battery Pack Instructional Manual
Comprehensive instructional manual for the Core SWX Helix Max Ultra 395wh V-mount, G-mount, and B-mount battery packs, covering features, operation, specifications, and warranty.
Preview HoMedics SBM-520H-EU Shiatsu 2-in-1 Back and Shoulder Massager User Manual
Comprehensive user manual for the HoMedics SBM-520H-EU Shiatsu 2-in-1 Back and Shoulder Massager, detailing its features, operating instructions, important safety precautions, and maintenance guidelines.