HEATIT ET-24

HEATIT ET-24 Тоңдуруу үчүн термостатикалык башкарылуучу розетканын колдонуу боюнча колдонмосу

Модели: ET-24

Бренд: HEATIT

1. Киришүү

This manual provides detailed instructions for the safe and efficient use of your HEATIT ET-24 Freeze Thermostatically Controlled Outlet. Please read this manual thoroughly before operation and retain it for future reference.

2. Коопсуздук маалыматы

Observe the following safety guidelines to ensure proper operation and prevent hazards:

  • This device is intended for use in dry locations only. Do not expose to water or excessive moisture.
  • Maximum load capacity is 15 Amps. Do not exceed this rating.
  • продукт болуп саналат ETL бекитилген, ensuring compliance with safety standards.
  • Always ensure the device is securely plugged into a functional electrical outlet.
  • To prevent risks of overheating or fire, always select heating cables and related products that have appropriate safety certifications and product liability insurance.
ETL certification documents for HEATIT products
Image: ETL certification documents, indicating product safety compliance.
Артка view of the HEATIT ET-24 outlet showing ETL certification mark
Сүрөт: Арткы view of the ET-24 outlet, displaying the ETL certification mark and usage instructions.

3. Продукциянын өзгөчөлүктөрү

The HEATIT ET-24 is designed for automatic temperature control to protect against freezing:

  • Термостат башкаруу: Automatically energizes connected devices when temperatures drop.
  • Smart Indicator Light: A yellow light illuminates when the temperature is below 38°F (3°C) and the outlet is actively supplying power.
  • Автоматтык иштетүү: Turns on below 38°F (3°C) and turns off at approximately 50°F (10°C).
  • Энергияны үнөмдөө: Activates only when necessary, reducing energy consumption.
  • Оңой орнотуу: Simple plug-and-play design.
  • Ар тараптуу колдонмолор: Suitable for 120 VAC electric heaters, engine heaters, pipe heat tape, roof heating cables, and similar applications.
HEATIT ET-24 Freeze Thermostatically Controlled Outlet, front view индикатор жарыгы менен
Сүрөт: алдыңкы view of the HEATIT ET-24 outlet, showing the two outlets and the indicator light.

4. Орнотуу жана орнотуу

Follow these steps to set up your HEATIT ET-24 outlet:

  1. Ensure the installation location is dry and protected from moisture.
  2. Plug the HEATIT ET-24 directly into a standard 120 VAC electrical wall outlet.
  3. Connect your heating device (e.g., heat tape, electric heater) to one or both of the outlets on the HEATIT ET-24. The unit supports both 2-pin and 3-pin plugs simultaneously.
  4. Баштапкы сыноо: To verify functionality upon receipt, place the unit in a freezer for approximately 45 minutes to reset its internal thermostat. After removing it from the freezer, plug it into a wall outlet. The yellow indicator light should illuminate, confirming the thermostat is active and the outlet is energized.
HEATIT ET-24 plugged into a wall outlet, showing compatibility with 2-pin and 3-pin plugs
Image: The ET-24 plugged into a wall outlet, illustrating its compatibility with both 2-pin and 3-pin plugs.

5. Иштөө нускамалары

The HEATIT ET-24 operates automatically based on ambient temperature:

  • Turn-on Temperature: The outlet will energize (turn on) when the ambient temperature drops below 38°F (3°C).
  • Turn-off Temperature: The outlet will de-energize (turn off) when the ambient temperature rises to approximately 50°F (10°C).
  • Индикатор жарыгы: A yellow indicator light will illuminate when the temperature is below 38°F (3°C) and the outlet is actively supplying power to the connected device. This light confirms the thermostat is working.
Diagram showing turn-on and turn-off temperatures for the HEATIT ET-24
Image: Visual representation of the automatic turn-on (below 38°F/3°C) and turn-off (above 50°F/10°C) temperatures.
Important tip regarding the indicator light and heating cable operation
Image: A crucial tip explaining that the indicator light shows power is ON, but the heating cable only heats when the thermostat senses low temperatures.

6. Техникалык тейлөө

Аппаратыңыздын узак иштөөсүн жана оптималдуу иштешин камсыз кылуу үчүн:

  • Keep the device clean and free from dust and debris. Use a dry cloth for cleaning.
  • Do not attempt to open or repair the unit. Refer to qualified personnel for service.
  • Store in a dry environment when not in use, especially during warmer seasons.

7. Кыйынчылыктарды

If you encounter issues with your HEATIT ET-24, consider the following:

  • Device not turning on at low temperatures:
    • Ensure the unit is securely plugged into a functional electrical outlet.
    • Verify that the connected appliance is working correctly when plugged directly into a standard outlet.
    • Perform a reset: Place the unit in a freezer for approximately 45 minutes. After removing, plug it into a wall outlet. The indicator light should turn on if the ambient temperature is below 38°F (3°C).
  • Indicator light is on, but connected appliance is not heating:
    • The indicator light confirms the outlet is energized. Check the connected appliance itself for proper function and ensure it is designed to operate at the current temperature.
  • Device not turning off at higher temperatures:
    • Ensure the ambient temperature has risen above 50°F (10°C). The device has a hysteresis to prevent rapid cycling.
    • If the issue persists, perform a reset as described above.

8. Техникалык шарттар

ӨзгөчөлүкДеталь
БрендЖЫЛУУ
Модель атыET-24
Продукциянын өлчөмдөрү (D x W x Y)1.38" x 3.78" x 1.06"
Controller TypeАвтоматтык термостатикалык башкаруу
ТүсСары
Температураны көзөмөлдөө түрүАвтоматтык
Power SourceЭлектр зымдары
Тtage120 вольт
Max. Учурдагы жүктөө15 Amps
Макс. Жүктөө күчү1800 Ватт
Turn-on Temperature38°F (3°C) төмөн
Turn-off TemperatureБолжол менен 50°F (10°C)
МатериалPC + ABS
Элемент Салмагы2.99 унция
СертификаттарETL бекитилген
Graphic displaying HEATIT ET-24 specifications including dimensions, material, voltage, and load capacity
Image: Detailed specifications of the ET-24, including physical dimensions and electrical ratings.

9. Кепилдик жана колдоо

This product is designed for reliability and safety. While specific warranty details are not provided in this manual, HEATIT products are typically backed by quality assurance.

Кайтаруу саясаты: Standard return policies apply, typically allowing returns within 30 days for refund or replacement, as per the point of purchase.

Продукт жоопкерчилиги: To ensure safety, always use heating cables and related products that carry appropriate safety certifications and product liability insurance.

For support, please refer to the official HEATIT store or contact customer service through your point of purchase.

Тектеш документтер - ET-24

Preview Heatit Z-TEMP2 Z-Wave Thermostat Installer Manual
Comprehensive installer manual for the Heatit Z-TEMP2, a battery-operated Z-Wave thermostat designed for water-based heating systems. Provides detailed instructions on installation, Z-Wave network integration, configuration parameters, and operation.
Preview Heatit WiFi термостат орнотуучунун колдонмосу: орнотуу, өзгөчөлүктөрү жана техникалык мүнөздөмөлөрү
Heatit WiFi термостаты үчүн комплекстүү орнотуучу колдонмо, анда орнотуу, мүмкүнчүлүктөр, иштөө режимдери, WiFi жөндөөлөрү жана полду жылытуу системалары үчүн техникалык мүнөздөмөлөр.
Preview Heatit DIN Smart термостаты Z-Wave орнотуу боюнча колдонмо
Heatit DIN Smart термостаты үчүн Z-Wave орнотуусун, конфигурациясын, функцияларын жана турак жай жана өнөр жай колдонмолору үчүн көйгөйлөрдү чечүүнү камтыган комплекстүү орнотуу колдонмосу.
Preview Heatit Z-TRM2 Термостат орнотуучунун колдонмосу жана техникалык мүнөздөмөлөрү
Heatit Z-TRM2 Z-Wave Plus термостат үчүн комплекстүү орнотуучу колдонмо. Орнотуу, орнотуу, программалоо, ката коддору жана акылдуу үйдү жылытуу үчүн техникалык маалыматтарды камтыйт.
Preview Heatit 7S NFC Термостат орнотуучу колдонмосу - Орнотуу жана иштетүү боюнча колдонмо
Heatit 7S NFC термостаты үчүн комплекстүү орнотуучу колдонмосу, орнотууну, орнотууну, колдонуучу режимдерин жана NFC аркылуу смартфон тиркемесин башкарууну камтыйт.
Preview Heatit ZM Dimmer 250W Z-Wave орнотуу боюнча колдонмо
Heatit ZM Dimmer 250W үчүн толук орнотуу колдонмосу, ал Z-Wave Plus менен шайкеш келген акылдуу жарыкты диммер, автоматтык түрдө орнотуп орнотуу үчүн. Зымдар, орнотуулар, параметрлер жана мүчүлүштүктөрдү оңдоо жөнүндө билип алыңыз.