SPORTARC Metal Blade Fixing Kit Instruction Manual

1. Коопсуздук маалыматы

This product is designed for use with brushcutters. Improper use or installation can lead to serious injury. Always prioritize safety.

• Жеке коргонуу каражаттары (ЖКК): Always wear appropriate personal protective equipment, including safety glasses or a face shield, hearing protection, heavy-duty gloves, long pants, and sturdy footwear when operating a brushcutter or installing this kit.
• Учуучу сыныктар: Brushcutters can generate flying debris. Ensure no bystanders are in the work area.
• Курал абалы: Before each use, inspect the brushcutter and the blade fixing kit for any damage, wear, or loose parts. Do not use if any components are compromised.
• Электр энергиясын өчүрүү: Always ensure the brushcutter engine is off and the spark plug cap is disconnected (for gasoline models) or the battery is removed (for electric models) before performing any installation, maintenance, or adjustments.
• Туура орнотуу: Follow all installation instructions carefully. Incorrect assembly can cause the blade to detach during operation.

2. Продукт бүтүп калдыview

The SPORTARC Metal Blade Fixing Kit is a replacement set of components essential for securely attaching a metal blade to compatible Stihl brushcutters. This kit ensures proper blade rotation and stability during operation.

Бөлүк номерлери:

• 4119 642 7600
• 4119 713 3100
• 4128 713 1600

3. Пакеттин мазмуну

The SPORTARC Metal Blade Fixing Kit typically includes the following components:

• 1x Beveled Washer
• 1x Rider Plate
• 1x Left-Hand Nut (12mm)

Сүрөт 1: Бүттүview of the SPORTARC Metal Blade Fixing Kit, showing the beveled washer, rider plate, and left-hand nut.

Image 2: Top-down perspective of the beveled washer, rider plate, and left-hand nut, highlighting their shapes and sizes.

Сүрөт 3: Жакын пландан view of the 12mm left-hand threaded nut, a key component for securing the blade.

4. Шайкештик

This kit is a non-original replacement part compatible with a wide range of Stihl brushcutter models. It is crucial to verify that your brushcutter has a shaft extending from the gear head for proper fitment.

Compatible Stihl Brushcutter Models:

• FS160, FS180, FS220, FS260, FS280, FS290
• FS300, FS310, FS311, FS350, FS360C, FS380
• FS400, FS410C, FS450, FS460C, FS480, FS490C

Note: This kit is only suitable for machines that have a shaft protruding from the gear head.

5. Орнотуу жана орнотуу

Follow these general steps for installing the metal blade fixing kit. Always refer to your specific brushcutter's manual for detailed instructions and safety precautions.

1. Prepare the Brushcutter: Ensure the brushcutter is turned off, the engine is cool, and the spark plug cap is disconnected (or battery removed). Place the brushcutter on a stable, flat surface.
2. Remove Old Components (if applicable): If replacing an existing kit, carefully remove the old blade, nut, rider plate, and beveled washer. Note the order of removal.
3. Шахтаны тазалаңыз: Clean any debris or rust from the brushcutter's gear head shaft.
4. Install the Beveled Washer: Slide the beveled washer onto the shaft. Ensure it sits flush against the gear head.
5. Place the Blade: Position the metal blade onto the shaft, aligning its center hole with the shaft. Ensure the blade is oriented correctly according to its design (cutting edge facing the direction of rotation).
6. Install the Rider Plate: Place the rider plate over the blade, ensuring its splines or keyway align with the shaft. The rider plate helps secure the blade.
7. Secure with the Nut: Thread the left-hand nut (12mm) onto the shaft. Remember that left-hand threads tighten counter-clockwise. Use a wrench to tighten the nut firmly, but do not overtighten.
8. Орнотууну текшерүү: Gently try to move the blade by hand to ensure it is securely fastened and does not wobble.

Image 4: Detail of the beveled washer, showing the 'NUT LOOSEN' inscription with directional arrows, indicating the loosening direction for the nut.

Image 5: The complete set of components for the blade fixing kit, ready for assembly onto a brushcutter shaft.

6. Иштөө нускамалары

Once the blade fixing kit and blade are securely installed, operate your brushcutter according to its manufacturer's instructions. Always maintain a firm grip on the brushcutter and be aware of your surroundings.

• Ишке чейинки текшерүү: Before starting the brushcutter, re-check that the blade is firmly attached and all components of the fixing kit are secure.
• Жумуш аймагын тазалоо: Ensure the area you are working in is clear of obstacles, people, and animals.
• Туура позиция: Maintain a balanced and stable stance while operating the brushcutter.

7. Техникалык тейлөө

Regular maintenance of your blade fixing kit and brushcutter will ensure longevity and safe operation.

• Үзгүлтүксүз текшерүү: Periodically inspect the beveled washer, rider plate, and nut for signs of wear, cracks, or deformation. Replace any damaged components immediately.
• Тазалык: Keep the components clean from grass, dirt, and debris. This prevents corrosion and ensures proper fitment.
• Сактагыч: Store the brushcutter and its accessories in a dry, clean place, away from extreme temperatures and moisture.

8. Кыйынчылыктарды

If you encounter issues with the blade fixing kit, consider the following:

• Бычактын термелиши: If the blade wobbles during operation, immediately turn off the brushcutter. Check if the nut is sufficiently tightened and if the rider plate and beveled washer are correctly seated. Ensure the blade's center hole is not worn or oversized.
• Difficulty Tightening Nut: Ensure you are turning the nut counter-clockwise to tighten, as it is a left-hand thread. Check for any cross-threading or damage to the shaft threads or nut threads.
• Бычак тийбей жатат: Verify that the brushcutter's shaft is indeed protruding from the gear head and that all components are installed in the correct order.

9. Техникалык шарттар