GDR PRO Keyless Keypad Intellicode GK-R User Manual

1. Киришүү

Thank you for choosing the GDR PRO Keyless Keypad Intellicode GK-R. This device provides convenient, secure access to your garage without the need for a traditional remote. It is designed to be compatible with Genie Intellicode garage door openers.

This manual provides essential information for the proper installation, programming, and maintenance of your new keypad.

Пакеттин мазмуну:

• GDR PRO Keyless Keypad Unit(s)
• Wall Mount Hardware (Screws and Anchors)
• Lithium Metal Battery(ies) (pre-installed or included separately)
• Программалоо боюнча колдонмо

Image: Contents included with the GDR PRO Keyless Keypad package, showing two keypads, a programming guide, mounting screws, and two 9V batteries.

2. Коопсуздук боюнча маанилүү маалымат

Please read and understand all safety warnings before installation and operation. Failure to follow these instructions may result in serious injury or property damage.

• ЖОК allow children to operate the keypad or play with the garage door opener.
• Keep the garage door in sight while operating it with the keypad. Ensure no persons or objects are in the path of the door.
• Install the keypad out of the reach of small children (at least 5 feet above the floor) and away from all moving parts of the door.
• Батареяларды жергиликтүү эрежелерге ылайык туура жок кылыңыз.

3. Орнотуу жана орнотуу

3.1 Батареяны орнотуу

The keypad requires one Lithium Metal battery (included). The battery compartment is typically located on the back of the unit or under a removable cover. Ensure the battery is inserted with the correct polarity (+/-) as indicated inside the compartment.

3.2 Баскычтопту орнотуу

Select a convenient location outside your garage, at least 5 feet above the ground, where the keypad is easily accessible but out of reach of small children. Avoid mounting directly in direct sunlight or where it will be exposed to excessive moisture.

1. Open the keypad cover.
2. Шаблон катары клавиатураны колдонуп, дубалга каалаган орнотуу тешиктерин белгилеңиз.
3. Drill pilot holes if necessary, and insert the provided wall anchors.
4. Secure the keypad to the wall using the provided screws. Ensure it is firmly attached.

Image: Two GDR PRO keypads shown with the included mounting screws and wall anchors, illustrating the components used for installation.

4. Иштөө нускамалары

4.1 Programming the Keypad

The GDR PRO Keyless Keypad is designed to be programmed to your Genie Intellicode garage door opener. Detailed programming instructions are provided with your purchase on a separate programming guide. Generally, the process involves:

1. Locating the "Learn" or "Program" button on your garage door opener motor head unit.
2. Pressing the "Learn" button to activate programming mode (the indicator light will typically illuminate).
3. Quickly entering your desired personal identification number (PIN) on the keypad and pressing the "Program" or "Send" button.
4. Confirming the programming by testing the keypad.

Эскертүү: Refer to the specific programming guide included with your keypad for exact steps, as procedures may vary slightly depending on your Genie opener model. A programming video may also be available to assist you.

4.2 Күнүмдүк иштөө

To operate your garage door using the keypad:

1. Open the keypad cover.
2. Enter your programmed 4-digit PIN.
3. Press the "Program" or "Send" button (or the designated activation button).
4. The garage door should activate.

5. Техникалык тейлөө

5.1 Батареяны алмаштыруу

When the keypad's backlight dims or the range decreases, it is likely time to replace the battery. Replace with a new Lithium Metal battery of the same type.

1. Open the keypad cover.
2. Locate and remove the battery compartment cover.
3. Remove the old battery and insert the new battery, observing correct polarity.
4. Securely replace the battery compartment cover. Ensure it clicks into place to prevent it from falling off.
5. Test the keypad operation.

5.2 Тазалоо

Клавиатуранын бетин жумшак, d менен тазалаңызamp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз, анткени алар финишке же электрондук тетиктерге зыян келтириши мүмкүн.

6. Кыйынчылыктарды

• Баскычтоп жооп бербей жатат:
  • Батарея туура орнотулганын жана жетиштүү заряддалганын текшериңиз. Зарыл болсо, алмаштырыңыз.
  • Ensure the keypad is within range of the garage door opener.
  • Verify that the keypad is correctly programmed to your opener. If unsure, repeat the programming steps.
• Garage door does not open/close:
  • Confirm you are entering the correct PIN.
  • Check for any obstructions in the path of the garage door.
  • Ensure the garage door opener itself is powered and functioning correctly.
• Battery cover loose or falling off:
  • Ensure the battery is seated correctly and not causing pressure on the cover.
  • Press the cover firmly until it clicks into place. If it continues to be loose, contact customer support.

7. Техникалык шарттар

8. Кепилдик жана колдоо

Кепилдик маалыматы жана техникалык колдоо үчүн, сатып алууда берилген документтерди караңыз же сатуучу менен түз байланышыңыз. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.