GREENCUT GTC190X бензин тиштүү дөңгөлөктүн колдонуу боюнча колдонмосу

1. Киришүү

Thank you for choosing the GREENCUT GTC190X Petrol Tiller. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new equipment. Please read this manual thoroughly before assembly, operation, or maintenance to ensure proper use and to prevent injury or damage.

The GTC190X is a powerful and efficient petrol-powered tiller designed for preparing soil in gardens and agricultural fields. It features a 161cc 4-stroke OHV engine, a working width of 56cm, and durable hardened iron blades, making it suitable for various soil types and intensive work.

2. Коопсуздук маалыматы

Электр жабдууларын иштетүүдө ар дайым коопсуздукка артыкчылык бериңиз. Коопсуздук көрсөтмөлөрүн аткарбоо олуттуу жаракат алууга же өлүмгө алып келиши мүмкүн.

• Колдонмону окуу: Иштөө алдында бардык көрсөтмөлөрдү жана эскертүүлөрдү түшүнүңүз.
• Жеке коргонуу каражаттары (ЖКК): Always wear appropriate safety glasses, hearing protection, sturdy footwear, and gloves.
• Күйүүчү май иштетүү: Handle petrol with extreme care. Store in approved containers, refuel in a well-ventilated area with the engine off and cool. Do not smoke while refueling.
• Иш чөйрөсү: Clear the work area of stones, debris, and other objects that could be thrown by the blades. Keep bystanders, children, and pets at a safe distance (at least 15 meters).
• Мотордун чыгышы: Operate the tiller only in well-ventilated outdoor areas. Engine exhaust contains carbon monoxide, which is a colorless, odorless, and deadly gas.
• Бычактын коопсуздугу: Keep hands and feet away from rotating blades. Ensure the engine is off and blades have stopped before performing any adjustments or maintenance.
• Бөөдө операция: Exercise extreme caution when operating on slopes. Till across the face of slopes, never up and down.
• Коопсуздук кулпу: The tiller is equipped with a safety lock to prevent accidental starting. Always engage this lock when the machine is not in use or during maintenance.

3. Продукциянын компоненттери

Familiarize yourself with the main components of your GREENCUT GTC190X tiller.

• Мотор: 161cc 4-stroke OHV air-cooled engine.
• Tilling Blades: Hardened iron blades for effective soil cultivation.
• Жөнгө салынуучу руль: Ergonomic handlebar, adaptable for various users and foldable for compact storage.
• Transport Wheel: Front wheel for easy maneuverability.
• Depth Stake: Adjustable stake to control tilling depth.
• Коопсуздук кулпу: Mechanism to prevent accidental starts.

3.1-сүрөт: Жалпысынан view of the GREENCUT GTC190X Petrol Tiller.

Figure 3.2: Detail of the hardened iron tilling blades and transport wheel.

4. Орнотуу жана чогултуу

Follow these steps to assemble and prepare your tiller for first use.

4.1. Рулдун жыйнагы

1. Attach the lower handlebar section to the main unit using the provided bolts and nuts. Ensure a secure fit.
2. Connect the upper handlebar section to the lower section, aligning the holes and securing with the quick-release knobs or bolts.
3. Mount the control levers (throttle, clutch) to the handlebar and route the cables according to the diagrams in the separate assembly guide. Ensure cables are not pinched.

4.1-сүрөт: Каптал view of the tiller, showing the assembled handlebar.

4.2. Blade and Wheel Attachment

1. Attach the tilling blades to the axle shafts, ensuring they are oriented correctly (left and right blades). Secure them with the pins or bolts.
2. Install the transport wheel at the front of the tiller. This wheel is used for moving the tiller to and from the work area, and can be adjusted or removed during tilling.

Figure 4.2: Detail of the transport wheel and tilling tines.

4.3. Күйүүчү май жана май

Before starting, ensure the engine has sufficient fuel and oil.

• Мотор майы: Fill the engine crankcase with the recommended 4-stroke engine oil (refer to engine manual for specific type and capacity). Do not overfill.
• Күйүүчү май: Fill the fuel tank with fresh, unleaded petrol. Do not use E85 or other ethanol blends not approved for small engines.

WARNING: Never refuel a hot engine. Always allow the engine to cool down before adding fuel.

5. Иштөө нускамалары

Learn how to safely start and operate your GREENCUT GTC190X tiller.

5.1. Моторду ишке киргизүү

1. Ensure the tiller is on a level surface and the safety lock is disengaged.
2. Open the fuel valve (if applicable).
3. Set the choke lever to the 'CHOKE' position (for cold starts).
4. Press the primer bulb 3-5 times until fuel is visible.
5. Move the throttle lever to the 'FAST' position.
6. Кыймылдаткыч иштегенге чейин стартердин арканын бекем жана жылмакай тартыңыз.
7. Мотор ишке киргенден кийин, кыймылдаткыч ысып жатканда, .Муунткуч рычагын акырындык менен 'RUN' абалына жылдырыңыз.

5.2. Tilling Operation

When tilling, hold the handlebars firmly with both hands. Allow the tiller to pull itself forward, guiding it gently. For deeper tilling, make multiple passes, gradually increasing the depth with each pass by adjusting the depth stake.

Figure 5.1: Operator using the GREENCUT GTC190X tiller to cultivate soil.

Сүрөт 5.2: Алдыңкы view of the tiller in operation, showing the tilling action.

5.3. Моторду токтотуу

To stop the engine, move the throttle lever to the 'STOP' or 'OFF' position. If equipped, turn the engine switch to 'OFF'.

6. Техникалык тейлөө

Үзгүлтүксүз техникалык тейлөө эгинин узак мөөнөттүү жана оптималдуу иштешин камсыз кылат.

6.1. Ар бир колдонуудан кийин

• Clean the tilling blades and housing of any soil, debris, or plant material.
• Inspect blades for damage or excessive wear.
• Check all nuts, bolts, and fasteners for tightness.

6.2. Мотордун майын алмаштыруу

Change the engine oil after the first 5 hours of operation, and then every 25-50 hours or annually, whichever comes first. Refer to the engine manual for detailed instructions and oil specifications.

6.3. Аба чыпкасын тазалоо/алмаштыруу

Inspect the air filter every 10-20 hours of operation, or more frequently in dusty conditions. Clean or replace as necessary to ensure proper engine performance.

6.4. Spark Spark Inspection

От алдыргыч шамды жыл сайын же ар бир 50 саат сайын текшерип туруңуз. Эгерде кирдеп же эскирип калса, тазалаңыз же алмаштырыңыз.

6.5. Сактоо

For long-term storage, drain the fuel tank or add a fuel stabilizer. Run the engine until it stops to consume all fuel in the carburetor. Clean the tiller thoroughly and store in a dry, protected area.

7. Кыйынчылыктарды

Бул бөлүм сиз кабылышы мүмкүн болгон жалпы маселелер боюнча чечимдерди берет.

If you encounter issues not listed here or if solutions do not resolve the problem, please contact Greencut customer support.

8. Техникалык шарттар

Key technical specifications for the GREENCUT GTC190X Petrol Tiller.

9. Кепилдик жана колдоо

Greencut products are designed for durability and performance. For warranty information, please refer to the documentation included with your purchase or visit the official Greencut webсайт. Ар кандай кепилдик дооматтары үчүн сатып алганыңыздын далилин сактаңыз.

For technical assistance, spare parts, or service inquiries, please contact the seller, Beself Brands S.A., or Greencut customer support directly. Provide your model number (GTC190X) and purchase details when contacting support to ensure efficient service.

You can find more information and support resources on the official Greencut brand store: Greencut Brand Store